Clarion APX400 - Manuals - manualsarea.com

Page 2 - save your original sales receipt as proof of; TABLE OF CONTENTS

INTRODUCTION The Clarion APX400.4M is a full-featured four-channel amplifier. It comeswith the following features: • Full frequency response with low distortion and exceptional signal to noise performance • Advanced circuit design features bridgeable and mixed mode operation for use in a variety of ...

Page 4 - Gain Controls; - Seperate Front and Rear Gain Controls allow you to set the; Bass Boost Control; - The front crossover frequency is fully adjustable; Rear X-Over Frequency Multiplier Switch; - These switches are equipped with 12dB per octave; Input Mode Switches; - These switches allow you to set the input mode for

RIGHT, FRONT LEFT, REAR RIGHT and REAR LEFT. The Gain Controlsprovide a wide adjustment range to accommodate output levels from any brandof source unit. • Gain Controls - Seperate Front and Rear Gain Controls allow you to set the nominal operating level of the amplifier. The amplifier ’s range, 250m...

Page 5 - Rear Channel Input Select -; This switch allows you to use a 2 channel input; Speaker Level Inputs; - These provide connections for a high-level stereo; WARNING; CONNECTIONS FOR POWER AND SPEAKERS

• Rear Channel Input Select - This switch allows you to use a 2 channel input to drive all 4 channels of this amplifier. • Speaker Level Inputs - These provide connections for a high-level stereo source. In addition, these connections are provided for installations where thesource unit’s RCAoutputs ...

Page 7 - -Channel Stereo System; In this 4-channel system, the APX400.4M drives a pair of stereo

4-Channel Stereo System 2-Channels High-Pass, 2-Channels Low-Pass Figure 4 - In this 4-channel system, the APX400.4M drives a pair of stereo satellites for the front and a pair of stereo subwoofers for the rear. Note thefilter settings. 5

Page 8 - Bridged Mono Channel; The APX400.4M can also be used to drive a pair of stereo satellites

2-Channel Stereo System with Low-Pass Bridged Mono Channel Figure 5 - The APX400.4M can also be used to drive a pair of stereo satellites for the front and a single mono subwoofer for the rear. Note the filter settings. 6

Page 9 - The APX400.4M can be set up as a 2-channel high-power amplifier

2-Channel High Power Systems (Satellite or Subwoofer) Figure 6 - The APX400.4M can be set up as a 2-channel high-power amplifier to drive a pair of satellites (or subwoofers). 7

Page 10 - Speakers On Front; The amplifier can be configured for a mixed-mode operation on

Mixed-Mode System On Rear; Full-Range Speakers On Front NOTE: Chart values based on 4 ohm speakers.Figure 7 - The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides componentvalues to create a 6dB per octave crossover at specif...

Page 12 - Electrical connections for the APX400.4M

6. Refer to the Figure 8 when making electrical connections. Connect theamplifier’s positive (+) lead via a fuse directly to the positive (+) terminal on the battery. Do not connect this wire to the vessel’s fuse panel. Use red-insulated 10-gauge (or larger) wire for the amplifier’s positive (+) pow...