Christie 020-000141-01 - Manuals

Page 3 - User Manual

= Lens not included. User Manual LX1000 User Manual 1 020-000141-01 Rev. 1 (05-2009)

Page 4 - Features and Design; * Z o o m a n d fo c u s f u n c t i o n s m ay n o t o p e r a t e

2 This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid cr ystal display (LCD) technology. U Functionally Rich U Simple Computer Syste...

Page 5 - Trademarks; Table of Contents

3 Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Table of Contents Features and Design . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . 3 To The Owner . . . . . . . . ...

Page 6 - RISK OF ELECTRIC SHOCK; CAUTION; CAUTION ON HANGING FROM THE CEILING; To The Owner; Safety Precaution

4 CAUTION: TO R E D U C E T H E R I S K O F E L E C T R I C S H O C K , D O N OT R E M OV E C OV E R ( O R B AC K ) . N O U S E R - S E RV I C E A B L E PA RT S I N S I D E E XC E P T L A M P R E P L AC E M E N T. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T H I S SY M B O L I N D I C AT E S T ...

Page 7 - Safety Instructions

5 All the safet y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for l a t e r u s e . U n p l u g t h i s p r o j e c t o r f r o m AC p owe r s u p p l y before cleaning. Do not use liquid or aerosol cleaners. Use a...

Page 8 - – Do not put any flammable object or spray can near; Air Circulation; Top Panel

6 Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions...

Page 9 - Installing the; Positioning Precautions

7 Safety Instructions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. Ins...

Page 10 - Moving the Projector

8 Moving the Projector CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, other wise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an u...

Page 11 - AC Power Cord for the United States and Canada:; AC Power Cord Requirement; Compliance; Federal Communications Commission Notice; WARNING

9 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian Standard A...

Page 12 - Part Names and Functions; Kensington Security Slot

10 H 8 E G Front B D J L < Back D Lens Mount Cover J Projection Lens (Option) 8 Indicators E Infrared Remote Receiver (Front) CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. Infrared Remote Receiver (Rear) Exhaust Vent G Adjustable Feet L Term...

Page 13 - Terminals and Connectors; USB connector is to used to service the projector.; SERIAL PORT IN TERMINAL; RESET button; DVI INPUT TERMINAL

11 Terminals and Connectors E R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). 8 USB CONNECTOR (Series B) USB connector is to used to service the projector. < S-VIDEO INPUT JACK Connect the S-VIDEO output signa...

Page 14 - Automatically adjust the computer image to its; Side Control and Indicators; Side Control

12 < FOCUS button Adjust the focus. (p.27) J ZOOM button Zoom in and out the images. (p.27) D ON/STAND-BY button Turn the projector on or off. (pp.23,24) B INPUT button Select an input source INPUT 1, INPUT 2, Input 3 or Input 4. (pp.31-33) L AUTO PC ADJ. button Automatically adjust the computer ...

Page 15 - Indicators; – Blink slow when the filter is being scrolled (pp.

13 Indicators D J 8 E G L H 8 WARNING TEMP. indicator This indicator flashes red when internal projector temperature is too high. (pp.65, 72-74) H LAMP 1 REPLACE indicator Turn orange when the life of the projection lamp1 draws to an end. (pp.61, 73) D LAMP Indicator This indicator is dim when the p...

Page 16 - Configurations of Terminals; Appendix

79 Configurations of Terminals ANALOG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert. sync.) DDC Data Ground Vert. sync. DDC Clock 9...

Page 17 - Remote Control Battery Installation; Remote Control Receivers and Operating Range

15 Remote Control Battery Installation 1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operatio...

Page 19 - Installation; Lens Installation

17 Installation Lens Installation Before setting up the projector, install Projection Lens on the projector. Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Do not...

Page 20 - Picture Level and Pitch Adjustment; Lens Shift Adjustment; When the lens is shifted to top.; To raise the projector, rotate the feet clockwise.

18 Picture Level and Pitch Adjustment Installation ADJUSTABLEFEET REAR ADJUSTABLEFEET (Refer to p.10) Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27) Lens Shift Ad...

Page 21 - Terminals of Projector; Replacement of Terminal

19 Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface B...

Page 22 - Connecting to Computer; Cables used for connection; DVI Cable

20 Installation Connecting to Computer VGA Cable Monitor Output Desktop type Laptop type Terminals of the projector Monitor Output DVI Cable BNC Cable Monitor Output 5NPLUG THE POWER CORDS OF BOTH THEPROJECTOR AND EXTERNAL EQUIPMENT FROMTHE!#OUTLETBEFORECONNECTINGCABLES Cables used for connection s6...

Page 23 - Connecting to Video Equipment

21 Installation Connecting to Video Equipment Video Source (example) Video Cassette Recorder Video Disc Player RGB SCART21-pin Output Y Pb/Cb Pr/Cr Y-Pb/Cb-Pr/Cr Component video output equipment. (such as DVD player or high-definition TV source.) Component Video Output BNC Cable Digital Output ( HDC...

Page 24 - NOTE ON THE POWER CORD; Projector side; For Continental Europe; Connecting the AC Power Cord

22 NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side AC ...

Page 25 - Turning On the Projector; Enter a PIN code; Basic Operation

23 Turning On the Projector Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the READY indicator lights green. Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and the c...

Page 26 - Turning Off the Projector; Unplug the AC power cord from the AC outlet.

24 Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After t...

Page 27 - How to Operate the On-Screen Menu; Use the Point; Remote Control

25 Side Control SELECT button How to Operate the On-Screen Menu MENU button SELECT button POINT buttons On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point buttons to sel...

Page 28 - Menu Bar; For Computer Source

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image level among Standard, Real, and Image 1–10(p. 38). Used to adjust the size of the image. [Normal/True/Wide/Full screen/Custom/Keystone/Ceilin...

Page 29 - Operating with Projector Control; Display “Lens shift” on the screen. Use the Point; Zoom; Auto PC

27 Operating with Projector Control Display “Lens shift” on the screen. Use the Point ! buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift. Lens ...

Page 31 - Operating with Remote Control; See page 27 for details.; See the previous page for details.

29 Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the FREEZE button on the remote control to freeze the picture on...

Page 32 - KEYSTONE button; SHUTTER button; FILTER button

30 KEYSTONE button Reduce the upper width with Point ! button. Re d u c e t h e l owe r w i d t h with Point button. Reduce the left part with Point button. Reduce the right part with Point button. s4HEWHITEARROWSINDICATETHATTHEREISNOCORRECTIONs!REDARROWINDICATESTHEDIRECTIONOFCORRECTIONs!NARROWDISAP...

Page 33 - Input; Remote Control Operation; Side Control Operation; Side Control button operation; Input Selection; Remote Control button operation

31 Remote Control INPUT buttons Input Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. It switches to INPUT 1, INPUT 2, INPUT 3 or INPUT 4 as you press the INPUT button. Before using the INPUT button on the remote control, you must select a correct input source by On-Scre...

Page 34 - Menu Operation; Computer Input Source Selection; When Selecting the INPUT 1 with DVI/D-sub 15 terminals

32 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ! buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input. 1 2 Use the Point...

Page 35 - Video Input Source Selection

33 When the video input signal is connected to the S-VIDEO jack, select S-Video. When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. When the video input signal is connected to the VIDEO jack, select Video. When connecting to video equipment, select the type ...

Page 36 - Computer System Selection; One of the following messages may appear when:; Selecting Computer System Manually; PC system can also be selected manually.; Automatic Multi-Scan System; Computer Input

34 Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automatically detects ...

Page 37 - Auto PC Adjustment; Direct Operation

35 Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the PC Adjust Menu i...

Page 38 - Manual PC Adjustment

36 Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store th...

Page 40 - Image Level Selection

38 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ! buttons to move the red frame pointer to the desired image level and then press the SELECT button. IMAGE SELECT MENU Normal picture level pre...

Page 41 - Screen Size Adjustment

39 Note: s4RUE&ULLSCREENAND$IGITALZOOMnCANNOT BESELECTEDWHENNOSIGNALISDETECTEDINTHE0#3YSTEM-ENUP s4HE PROJECTOR CANNOT DISPLAY AND RESOLUTION HIGHER THAN X )F YOUR COMPUTERSSCREEN RESOLUTION IS HIGHER THAN X LOWER THE RESOLUTION BEFORE CONNECTING THEPROJECTOR s4HEIMAGEDATAOTHERTHAN8'!X IS MODIFI...

Page 42 - For zooming in and out the images

40 Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ! buttons to pan the image. The Panning function can work only when the image is larger than the screen size.You can also enter the Digital zoom + mode by ...

Page 43 - Video System Selection; Video Jack or S-Video Jack; Video Input

41 AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon. Use the Point ! buttons to move the red arrow pointer to the desired syste...

Page 47 - Image Adjustment; COLOR SELECTION MODE; Picture Image

45 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ! buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Poin...

Page 50 - Setting

48 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, ...

Page 52 - Enter a Logo PIN code; Change the Logo PIN code lock setting

50 Change the Logo PIN code lock setting After a correct Logo PIN code is entered, the following dialog box appears. Use the Point buttons to switch On/Off, This function prevents an unauthorized person from changing the screen logo. Off . . . . The screen logo can be changed freely from the Logo Me...

Page 54 - RC sensor

52 Power management Time left before the lamp is off Press the SELECT button at Power management and the dialog box appears. Use the Point buttons to choose one of the three options.Press the Point button to select the timer, and then use the Point buttons to set the timer For reducing power consump...

Page 56 - Change the PIN Code; Change the PIN Code Lock setting

54 Change the PIN Code Change the PIN code CAUTION:WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 80, AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED. The PIN code can be changed to your desired four-...

Page 59 - Maintenance and Care; Filter Instructions

57 Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of ...

Page 60 - Replacing the Filter Cartridge; Pull out the filter cartridge by holding the finger grip.; RECOMMENDATION; ORDER REPLACEMENT FILTER CARTRIDGE

58 Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cover. (See the right figure.) 3 Put the new one back into the position and close the filt...

Page 61 - Resetting the Scroll Counter; Scroll counter; Resetting the Filter Counter; Filter counter

59 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon. Use the Point ! buttons to move the red frame pointer to Filter counter and then press the S...

Page 62 - Lamp Management; Projection Lamp lights normally.; Replace Indicators; Yellow Lamp; Projection Lamp is turned off.; Lamp Mode Changeover; Lamp Status Display

60 Lamp Management This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function ...

Page 63 - Follow these steps to replace the lamp.; NOTES ON LAMP REPLACEMENT; Lamp Replacement

61 Maintenance and Care Check the number of lamp to be replaced on the Lamp Status Display. Loosen a screw on the Lamp Cover. Slide and open the Lamp Cover until it makes a clicking sound. (See the right figure.) 1 3 Loosen two screws and pull out the Lamp to be replaced by grasping handle. 4 Turn o...

Page 64 - ORDER REPLACEMENT LAMP; Resetting the Lamp Counter

62 Maintenance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. L Model No. of your projector : LX1000 L Replacement Lamp Type No. : 003-120479-01 (Service Parts No. 610 341 9497) Reset...

Page 65 - LAMP HANDLING PRECAUTIONS

63 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. L Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for e...

Page 67 - Warning Indicators; Then check the matters below:; – Did you provide appropriate space for the projector to be

65 The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance. Warning Indicators The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature...

Page 68 - Troubleshooting; If a problem still persists, check the following solutions.; Solutions

66 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21.2. Check the cable connection. Make sure that all computers, video equipment, a...

Page 69 - The color is strange.

67 appears on the screen – The end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 55) appears on the screen – The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 57-58) The image is out of focus. – Adjust the focus of the pr...

Page 70 - Indicators blinks or lights.

68 WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. ...

Page 71 - Menu Tree; Computer Input/Video Input; Information

69 Menu Tree Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb,Pr/Cr Computer Input/Video Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Input 3 RGB Go to System (1) Go to System (3) Go to System (2) Video S-video Input 2 Go to System (1) Input H-sync freq. V-sync freq. Projector Information...

Page 74 - Indicators and Projector Condition; Check the indicators for the projector condition.; The projector is operating normally.; sssBLINKINGFAST; Projector Condition; The projector is in the Power management mode.

72 Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. sssON sssOFF sssBLINKINGATTHENORMALRATE (approx. 1 second ON, 1 second OFF) sssDIM sssBLINKINGSLOW (approx. 2 seconds ON, 2 seconds OFF) sssBLINKINGFAST (approx. 0.5 seconds O...

Page 75 - The projector is detecting abnormal condition.

73 Appendix The projector is detecting abnormal condition. Indicators Projector Condition LAMP red READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the pro...

Page 76 - after detecting an abnormal

74 Appendix The projector is detecting abnormal condition. Indicators Projector Condition LAMP red READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the scr...

Page 77 - Compatible Computer Specifications; PC Adjustment can be limited when these modes are selected.

75 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be limited when these modes are selected. Appendix = “True” cannot be selected when WUXGA1, UXGA2,...

Page 79 - Technical Specifications

77 Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm) Net Weight 60.85lbs (27.6 kg) Feet Adjustment 0˚ to 2.8˚ Panel Resolution LCD Panel System 1.8” TFT Active Matrix type, 3 panels Panel R...

Page 80 - Optional Parts

78 Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Appendix L The specifications are subject to change without notice. L LCD panels are manufactured to the highest possible standards. Even though 99.9...

Page 82 - Logo PIN Code Lock No.

80 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e f o u r- d i g i t n u...

Page 83 - Dimensions

81 Dimensions Unit: inch (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 Ň 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.72(120) 8.27(210) 6.89...