Page 2 - Installation Instructions; DISCLAIMER; Tighten Fastener
KWGSK110 Installation Instructions 2 DISCLAIMER CSAV, Inc., and its affiliated corporations and subsidiaries(collectively, "CSAV"), intend to make this manual accurate andcomplete. However, CSAV makes no claim that the informationcontained herein covers all details, conditions or variations,...
Page 3 - TOOLS REQUIRED FOR INSTALLATION AND PARTS
Installation Instructions KWGSK110 3 TOOLS REQUIRED FOR INSTALLATION AND PARTS TOGGLER 1/2" (Ø13mm) /6" 5/32" x1 I/M A (1) D (4) G (4) C (1) E (4) B (2) J (3) F (4) K (3) H (4) M (1) M4 x 12 L (3) 1/2" x 3/4" 1/4"-20 x 1 3/4" 3/16" M4 x 20 M4 x 20 1/4" 1/2" x ...
Page 4 - Site Requirements; Figure 1; Drywall
KWGSK110 Installation Instructions 4 Site Requirements WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! The figure below identifies the minimum reguirements for installation of display mounts onto asteel stud structure. If the struc...
Page 5 - Mount Installation; Figure 2
Installation Instructions KWGSK110 5 Mount Installation After determining the site meets the installation requirements: 1. Identify desired mounting location on wall. 2. Using a stud finder or similar method locate studs. 3. Align mounting holes in mount with studs making suremounting holes are cent...
Page 6 - Figure 5; Display Installation; flush with; Flush Mount Display; upper; Figure 7; lower; RECESSED MOUNTING HOLES; Centris Bracket
KWGSK110 Installation Instructions 6 Figure 5 11. Place mount over anchors and align mounting holes in display mount with holes in anchors. (See Figure 6) 12. Place flat washer (J) onto Phillips pan head screws (K).13. Insert Phillips pan head screws (K) with flat washer (J) through mounting hole in...
Page 7 - Figure 8; IMPROPER INSTALLATION CAN LEAD TO; CABLE MANAGEMENT; Attach all cables to display.; View from Bottom
Installation Instructions KWGSK110 7 4. Select proper length spacer and screw. (See Figure 8) NOTE: All spacers used should be the same length. If the recess depths result in multiple spacerlengths, then select the longer spacer. 5. Place the four selected spacers over each of the mountholes on the ...
Page 8 - ADJUSTMENTS; Swing Arm
KWGSK110 Installation Instructions 8 Figure 11: ADJUSTMENTS Swing Arm PIVOT / SWING 1. Using 3/16" hex key, slightly loosen or tighten theadjustment screw(s) as necessary (See Figure 12). Figure 12 Height Adjustable 1. Using 5/32" hex key, slightly loosen or tighten theadjustment screw as ne...
Page 12 - Europe; Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands; Asia Pacific; 009 Milestone AV Technologies, a
KWGSK110 Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, Block D, Lily YinD...
