Chief XTM1U - User Manual - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

XSM1U/XTM1U Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all deta...

Page 3 - DIMENSIONS; BACKWARDS ANGLE COMPENSATION SETTINGS

Installation Instructions XSM1U/XTM1U 3 DIMENSIONS 2° 1° 0 DETAIL A SCALE 1 : 1.5 D B BACKWARDS ANGLE COMPENSATION SETTINGS A DETAIL D SCALE 1 : 1.5 DETAIL B SCALE 1 : 1.5 XSM1U 1066.8 42.00 1085.9 42.75 2.25 57.2 666.8 26.25 3.7595.3 7.00 177.8 1. MAXIMUM MOUNTING PATTERN IS 38.7" (982 mm) WITH...

Page 5 - LEGEND

Installation Instructions XSM1U/XTM1U 5 LEGEND Tighten Fastener Apretar elemento de fijaciónBefestigungsteil festziehenApertar fixadorSerrare il fissaggioBevestiging vastdraaienSerrez les fixations Loosen Fastener Aflojar elemento de fijaciónBefestigungsteil lösenDesapertar fixadorAllentare il fissa...

Page 6 - TOOLS REQUIRED FOR INSTALLATION; Universal Hardware Kit; OR

XSM1U/XTM1U Installation Instructions 6 TOOLS REQUIRED FOR INSTALLATION PARTS 7/32" (5.5mm) Wood Stud #2 3/8" (9.5mm) Concrete 1/8" (included) 3/16" x 10" (included) 5/32" (included) C (4) E (4) A (4) B (4) D (4) F (4) G (8) H (4) (XSM1U Only) [Interface brackets] Universal H...

Page 7 - INSTALLATION; Locate Mounting Site; Installing to a Wood Stud Wall; Figure 1; Locking Rails; Figure 2

Installation Instructions XSM1U/XTM1U 7 INSTALLATION The XSM1U/XTM1U mounts are designed to be mounted to: • a bare concrete wall with a minimum thickness of 8" (203mm); • a bare 8" x 8" x 16" (203mm x 203mm x 406mm) concrete block wall; or • wood studs spaced 24" or 32" (610...

Page 8 - Installing to a Concrete Wall; Figure 3

XSM1U/XTM1U Installation Instructions 8 Installing to a Concrete Wall CAUTION: MINIMUM HORIZONTAL DISTANCE BETWEEN WALL BRACKETS IS 24" (610mm). Do not place mounting brackets closer together than 24" (610mm). 1. Determine the center of the TV screen, and where it should be located on the wa...

Page 9 - Attaching Interface Brackets to Screen; Figure 5

Installation Instructions XSM1U/XTM1U 9 Attaching Interface Brackets to Screen 1. Align the center of the bracket (V and W or X and Y) with center of screen. (See Figure 5) NOTE: The diamond-shape holes in the bracket correspond to the center of the mount. Figure 5 WARNING: IMPROPER INSTALLATION CAN...

Page 10 - Figure 8; Attaching Screen to Wall Mount; Figure 9; Both interface brackets must NEVER be located

XSM1U/XTM1U Installation Instructions 10 3. If necessary, the tilt interface bracket knobs may be switched to allow the interface brackets (X and Y) to be reversed. (See Figure 8) a. Remove display from mount.b. Remove interface brackets from display.c. Hold the right interface bracket horizontally,...

Page 12 - Adjustments; Horizontal Adjustment

XSM1U/XTM1U Installation Instructions 12 OPTIONAL: Adding Pull Knob (XSM1U Only) 1. If necessary due to height of tall screen, add pull knob (R) to bottom of interface brackets (V and W) to allow easier accessibility for adjustment purposes. (See Figure 13) 2. Adjust length of pull knob so it is not...

Page 13 - CLOSED

Installation Instructions XSM1U/XTM1U 13 Tilt (XTM1U Only) The interface brackets (X and Y) allow from -5° to 12° tilt, and can be locked at 0°, 6° and 12°.1. Loosen the interface bracket knob. 2. Adjust tilt as required. (See Figure 16) 3. The tilt may be locked at 0°, 6° or 12° using one 1/4-20 x ...

Page 14 - Backwards Angle Compensation (XSM1U Only)

XSM1U/XTM1U Installation Instructions 14 Backwards Angle Compensation (XSM1U Only) The XSM1U may be slightly adjusted to help compensate for the forward tilt of a heavy screen. NOTE: The interface brackets (V and W) ship in the 0° tilt position. (See Figure 17) 1. With interface brackets in CLOSED p...

Page 15 - Locking Screen Interface Brackets (Optional); Lock screen interface brackets onto mount rails using one

Installation Instructions XSM1U/XTM1U 15 Locking Screen Interface Brackets (Optional) 1. Lock screen interface brackets onto mount rails using one 3/8-16 x 3/4" set screw (P) on each interface bracket. (See Figure 18) Figure 18 Locking Mount (Optional) 1. Add padlock (not included) to interface ...

Page 16 - Europe; Franklinstraat 14, 6003 DK Weert, Netherlands; Asia Pacific; 016 Milestone AV Technologies

USA/International A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 918 on 9/F, Shatin Galleria 18-24 Shan Mei Stree...

Chief XTM1U - User Manual

Table of Contents:

Summary

Other Chief TV Brackets Models