Chevrolet Power Vision - Manuals

Chevrolet Power Vision – Manual in PDF format online.

Manuals:

Manual Chevrolet Power Vision

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 3 - Repeat this process for the passenger side.; WIRING; TURN SIGNAL WIRING:

6405/4410 Install PAGE 3 4. Insert the studs provided (3 for each side) with the tapered end out (see diagram E). They should screw into the mount up to the stop line – approx. 1cm or 3/8 of an inch. Next, line up the mount with the stock gasket and apply the mount to the door. While supporting the ...

Page 4 - If hole

6405/4410 Install PAGE 4 4. Repeat steps 1 through 3 for the passenger side identifying the right side active turn signal wire (recommend trying dark blue w/white tracer wire) and tapping the passenger mirror into it using a scotchlok. 5. Take the black wire from inside the driver side two -strand h...

Page 5 - (whic h is powered only when the ignition in on); or a 12 volt

6405/4410 Install Page 5 2. The next step is to run the main harness. Pop off both ends of the boot located between the door and cab. The main wiring harness has black and red wires attached. Remove the rubber band to uncoil the harness. One end of the main harness has a 12 pin and a 6 pin connector...

Chevrolet Manuals