Chamberlain 942FPC - Manuals

Chamberlain 942FPC – Manual in PDF format online.

Manuals:

Manual Chamberlain 942FPC

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Tips for Success; CORRECT; Reference; Step 3 Enroll Initial User

Tips for Success CORRECT 1. Make sure finger is clean and dry. Place finger flat above the sensor strip with the top knuckle above the sensor. 2. Swipe finger straight down keeping firm contact with the sensor. The swipe should be a slow, constant speed. SPECIAL NOTES: Use the same finger for every ...

Page 3 - Step 5 Programming; The unit must have an enrolled user before it can be; The Retry LED will light if another; Step 6 Operation; slowly; If cover is already open, press either the Resend or the

Step 5 Programming NOTE: The unit must have an enrolled user before it can be programmed to the receiver. Due to the 30 second time interval, a second person may be needed to press the “SMART” actuator. 1. Remove the front panel of the receiver case. Press and release the “SMART” actuator on the rec...

Page 4 - Troubleshooting; To prevent possible SERIOUS INJURY or DEATH:

Erase/Reset • To erase users: NOTE: Erasing a user will erase ALL stored fingerprints. User does NOT need to reprogram to opener. 1. Open cover and wait until Ready LED is lit. 2. Enrolled user must slowly and firmly swipe fingerprint. 3. Press and hold the Enroll button for at least 6 seconds. The ...

Chamberlain Manuals