Central Pneumatic 99959 - Manuals

Page 2 - sAve tHis mAnuAl; safety Alert symbol and signal; importAnt sAFety; instructions pertAining; general; To reduce the risks of electric shock, fire,; Work area; visitors away while operating the; personal safety; ing and use common sense when

SKU 99959 For technical questions, please call 1-800-444-3353. Page 2 sAve tHis mAnuAl Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - tool while tired or under the influ; fingers are off Trigger Lever com; tool use and care; Store the idle Spray Gun out of

SKU 99959 For technical questions, please call 1-800-444-3353. Page 3 tool while tired or under the influ - ence of drugs, alcohol, or medica- tion. A moment of inattention while operating the tool increases the risk of injury.Dress properly. 2. do not wear loose clothing or jewelry. contain long ha...

Page 4 - use only; the tool or specified by the manufac; sAve tHese; Symbol Definitions; symbol; Specific Safety Instructions; flammable or toxic liquids.

SKU 99959 For technical questions, please call 1-800-444-3353. Page 4 sory not intended for use with the specific tool model, increases the risk of injury. service Tool service must be performed 1. only by qualified repair personnel. When servicing a tool, use only 2. identical replacement parts. us...

Page 5 - sure. Be sure to keep a firm grip at

SKU 99959 For technical questions, please call 1-800-444-3353. Page 5 Follow solvent supplier instructions b. during use.Keep away from children. c. DO NOT exceed 90 LB. Air Pres- d. sure. WArning: do not point, or spray 2. contents of this spray gun at any person or animal at any time. The warnings...

Page 6 - FunctionAl description; Specifications; AssemBly

SKU 99959 For technical questions, please call 1-800-444-3353. Page 6 FunctionAl description Specifications Maximum Air Pressure 90 PSIAir Inlet 1/4” -18 NPT (Female) Air Consumption 4 SCFM @ 116 PSI initiAl tool set up/ AssemBly read the entire importAnt sAFety inFormAtion section at the beginning ...

Page 7 - Air flow, and therefore tool perfor; operAting instructions; tool set up; way not specifically explained

SKU 99959 For technical questions, please call 1-800-444-3353. Page 7 note: Air flow, and therefore tool perfor - mance, can be hindered by under- sized air supply components.The air hose must be long enough 3. to reach the work area with enough extra length to allow free movement while working.Make...

Page 8 - WArning: do not point or spray; turn and fine tune the spray pattern.; cAution! to prevent tool; If the tool still does not have sufficient

SKU 99959 For technical questions, please call 1-800-444-3353. Page 8 Work piece and Work Area set up Designate a work area that is clean 1. and well-lit. The work area must not allow access by children or pets to prevent injury and distraction.Route the air hose along a safe route 2. to reach the w...

Page 9 - ficient airflow, then a larger tool may; instructions; Procedures not specifically; lubrication

SKU 99959 For technical questions, please call 1-800-444-3353. Page 9 force at maximum pressure and suf- ficient airflow, then a larger tool may be required. user-mAintenAnce instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. to preven...

Page 10 - troubleshooting; problem; tool. disconnect air supply before service.; pleAse reAd tHe FolloWing cAreFully

SKU 99959 For technical questions, please call 1-800-444-3353. Page 10 troubleshooting problem possible causes likely solutions Decreased output. Not enough air pressure and/ 1. or air flow. Obstructed trigger. 2. Air leaking from loose housing. 3. Mechanism contaminated. 4. Check for loose connecti...

Page 11 - pArts list; part; pArts diAgrAm; Nozzle Lock Ring

SKU 99959 For technical questions, please call 1-800-444-3353. Page 11 pArts list part description Q’ty 1 Flexible Discharge Nozzle 1 2 Gun Assembly 1 3 1 qT. Container 1 pArts diAgrAm Gun Assembly (2) Flexible Supply Nozzle (1) 1 qT. Container (3) Nozzle Lock Ring Trigger Lock

Page 12 - 0 dAy WArrAnty; vary from state to state.

SKU 99959 For technical questions, please call 1-800-444-3353. Page 12 90 dAy WArrAnty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and wo...