Central Pneumatic 94446 - Manuals

Page 2 - read all instructions before using this tool!

SKU 94446 For technical questions, please call 1-800-444-3353. Page 2 Specifications Air Inlet 1/4”- 18 NPT Working Air Pressure 60-125 PSI Maximum Air Pressure 125 PSI * Magazine Capacity 80 Air Consumption 4 CFM @ 125 PSI Cleat Size Range 1-1/2” to 2” L-head Nails Staple Size Range 1” to 2” Floori...

Page 4 - Check the air connection for leaks. Disconnect from the air source.

SKU 94446 For technical questions, please call 1-800-444-3353. Page 4 Unpacking When unpacking, check to make sure the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Setup FloorStapler ...

Page 5 - loading the tool; Cleats; larger

SKU 94446 For technical questions, please call 1-800-444-3353. Page 5 loading the tool Warning! Disconnect the Stapler from the air compressor whenever loading or servicing. After disconnecting the Stapler from the air compressor, there could still be enough air pressure to fire the Stapler. After t...

Page 6 - operation; by providing more or less air pressure. Never exceed 125 PSI.; FigUre 3; Hammer; FigUre 2

SKU 94446 For technical questions, please call 1-800-444-3353. Page 6 operation 1. Connect the Floor Stapler to the air hose and turn on the air compressor. note: Before using on a floor, test the unit on a scrap piece of wood. Adjust the driving depth by providing more or less air pressure. Never e...

Page 7 - anytime; any; Disconnect the Stapler from the air hose.; Clearing Jams; FigUre 4; Figure; Reload the Stapler and reconnect it to the air hose.

SKU 94446 For technical questions, please call 1-800-444-3353. Page 7 anytime any maintenance or repairs are done (including clearing jams), FirSt: 1. Disconnect the Stapler from the air hose. 2. Empty Magazine (59, 69) completely. 3. Attempt to fire the Stapler into a piece of scrap wood to ensure ...

Page 8 - troubleshooting; Maintenance

SKU 94446 For technical questions, please call 1-800-444-3353. Page 8 troubleshooting note: Have the following problems repaired by a qualified service technician. proBleM CaUSe SolUtion Air leaking in nose Loose Nose Screws 1. Bumper is cracked/worn 2. Tighten and recheck 1. Replace Bumper 2. Lack ...

Page 9 - parts list

SKU 94446 For technical questions, please call 1-800-444-3353. Page 9 parts list part description 1 Hammer Face 2 O-ring 30.3 x 2.65 3 Screw 4 Spring Washer 5 Cylinder Cap 6 Screw 7 Spring Washer 8 Actuator A 9 Snap Ring 10 Half Block 11 Bushing 12 O-ring 33.3 x 2.65 13 Actuator B 14 O-ring 57.4 x 3...

Page 10 - assembly diagram

SKU 94446 For technical questions, please call 1-800-444-3353. Page 10 assembly diagram

Page 11 - liMited 1 Year WarrantY; vary from state to state.

SKU 94446 For technical questions, please call 1-800-444-3353. Page 11 liMited 1 Year WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...