Central Pneumatic 94275 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice wi...

Page 5 - SPECIFIC SAFETY RULES; Do not attempt to force small tools and

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 5 SPECIFIC SAFETY RULES This Dust Reclaimer Kit is designed for use only with Model 94274. Use the right product for the job. Do not attempt to force small tools and equipment to do the work of larger tools and equipment. There are ...

Page 7 - GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; should look like those in the following illustration.; FIGURE A

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 7 GROUNDING WARNING! GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool sh...

Page 8 - EXTENSION CORDS; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 8 EXTENSION CORDS DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the appl...

Page 9 - RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; NAMEPLATE; TABLE A; SYMBOLOGY; UNPACKING

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 9 RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120 OR 240 VOLT) NAMEPLATE AMPERES (at full load) EXTENSION CORD LENGTH 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 – 2.0 8 8 8 8 6 2. – 3.4 8 8 8 6 4 3.5 – 5.0 8 8 6 4 2 5. – 7...

Page 10 - Figure 1; longer; ” diameter

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 0 How To Install The Dust Reclaimer To A Wall Open the right side door（of the blast cabinet. Remove the four screws on the ex-haust board. Take out the exhaust board (see Figure ). Install the Hose Connector (48) using four M5x2 bol...

Page 11 - PAGE; Figure 3

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE Use the pattern in Figure 3 as a reference, or hold the assembled Dust Reclaimer against the wall where you intend to mount it, and mark the drill hole positions through the mounting holes. Drill holes in the wall to except the Wall...

Page 14 - How To Install The Dust Reclaimer To A Blast Cabinet (SKU # 94274); Re-install the Exhaust Board as shown in Figure 8; Figure 8; Exhaust Board

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 4 How To Install The Dust Reclaimer To A Blast Cabinet (SKU # 94274) Open the right side door（of the blast cabinet. Remove the four screws on the ex-haust board. Take out the Exhaust Board (see to Figure 8). Install the Hose Connect...

Page 17 - Do not use damaged equipment.; OPERATING INSTRUCTIONS

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 7 INSPECTION, MAINTENANCE, AND CLEANING . WARNING! Make sure the Power Cord Plug (2) of the Dust Reclaimer is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. Before each...

Page 18 - TROUBLESHOOTING; Problem

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 8 TROUBLESHOOTING Problem Possible Solution Dust Reclaimer does not turn on. Make sure the Power Switch (25) on is in its “ON” position. Make sure the Power Cord Plug of the Dust Reclaimer is properly connected to a working, 5 volt,...

Page 19 - available individually as replacement parts.; ASSEMBLY DIAGRAM; wa

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 9 NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. ASSEMBLY DIAGRAM ８２５２５２３２４８１７２２１５４８４７１２３４５６７９１０１１１２１３１４８１６Ｂ１５１８１９２０２１２６...

Page 20 - Parts List; Power Switch

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 20 PARTS LIST T HE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO...

Page 21 - LIMITED 1 YEAR / 90 DAY WARRANTY; which vary from state to state.

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 2 LIMITED 1 YEAR / 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of one year from date of...