Central Pneumatic 90670 - Manuals

Page 2 - saVe this manual; safety alert symbol and signal; impOrtant safetY; instructiOns pertaining; general; visitors away while operating the; personal safety; Stay alert. Watch what you are

Page 2 for technical questions, please call 1-800-444-3353. SKU 90670 saVe this manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - tool use and care; correct tool will do the job better and; service; Tool service must be performed; with the tool or specified by the; air source; tool or serious injury to persons. Use

Page 3 for technical questions, please call 1-800-444-3353. SKU 90670 medication. A moment of inattention while operating the tool increases the risk of injury to persons. avoid unintentional starting. Be b. sure the trigger is off before connecting to the air supply. Do not carry the tool with your...

Page 4 - and serious injury to persons.; Symbol Definitions; Specific Safety Instructions; saVe these

Page 4 for technical questions, please call 1-800-444-3353. SKU 90670 Such gases are capable of explosion and serious injury to persons. saVe these instructiOns. sYmBOls and specific safetY instructiOns Symbol Definitions symbol property or statement n o No-load speed psi Pounds per square inch of p...

Page 5 - specificatiOns; components and controls; assemBlY; unpacking

Page 5 for technical questions, please call 1-800-444-3353. SKU 90670 specificatiOns Operating Air Pressure 120 PSIMeasuring Air Pressure 10 - 120 PSI in 2 lb. Increments Air Inlet 1/4” -18 NPT Pocket Tire Gauge 6 - 60 PSI in 2 lb. Increments components and controls figure 1 Trigger Air Release Butt...

Page 6 - Incorporate a filter, regulator with

Page 6 for technical questions, please call 1-800-444-3353. SKU 90670 Quick coupler recommended air line components regulator with pressure gauge Quick coupler air hose on reel Valve filter coupler plug tool air compressor coupler plug 1. Incorporate a filter, regulator with pressure gauge, in-line ...

Page 7 - Operating instructiOns; a way not specifically; Work piece and Work area set up

Page 7 for technical questions, please call 1-800-444-3353. SKU 90670 Operating instructiOns read the entire impOrtant safetY infOrmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.inspect tool before use, looking for dam...

Page 8 - When the tire is inflated to the proper; maintenance; Procedures not specifically; lubrication; instructions. The moisture filter must

Page 8 for technical questions, please call 1-800-444-3353. SKU 90670 Trigger and press the Air Release button while the Tire Chuck is on the valve stem. Hold for a short period of time, then release, and check the tire air pressure on the Stick Gauge. Repeat as needed to achieve the desired value. ...

Page 9 - troubleshooting; tool. disconnect air supply before service.; please read the fOllOWing carefullY

Page 9 for technical questions, please call 1-800-444-3353. SKU 90670 troubleshooting problem possible causes likely solutions Decreased output. Not enough air pressure and/ 1. or air flow. Obstructed trigger. 2. Damaged hose. 3. Check for loose connections and make sure 1. that air supply is provid...

Page 10 - limited 1 Year WarrantY; lIEU OF All OTHER WARRANTIES, ExPRESS OR IMPlIED, INClUDING THE

Page 10 for technical questions, please call 1-800-444-3353. SKU 90670 limited 1 Year WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...