Central Pneumatic 65706 - Manuals

Page 2 - saVe thIs manuaL; safety alert symbol and signal; ImpOrtant saFetY; InstructIOns pertaInIng; general

SKU 65706 For technical questions, please call 1-800-444-3353. Page 2 saVe thIs manuaL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - presence of flammable liquids,; personal safety; of injury to persons.; tool use and care; correct tool will do the job better and

SKU 65706 For technical questions, please call 1-800-444-3353. Page 3 do not operate the tool in explo- b. sive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Keep bystanders, children, and ...

Page 4 - the specific tool model, increases the; service; with the tool or specified by the; air source; serious injury to persons. Use only; saVe these

SKU 65706 For technical questions, please call 1-800-444-3353. Page 4 safer at the rate for which the tool is designed. do not use the tool if the switch c. does not turn the tool on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. disconnect the tool fro...

Page 5 - Symbol Definitions; symbol; Specific Safety Instructions; Vibration precautions; cal injury, particularly to the hands, arms

SKU 65706 For technical questions, please call 1-800-444-3353. Page 5 sYmBOLs and specIFIc saFetY InstructIOns Symbol Definitions symbol property or statement n o No-load speed .../min Revolutions or reciprocation per minute psI Pounds per square inch of pressure ft-lb Foot-pounds of torque Bpm Blow...

Page 7 - FunctIOnaL descrIptIOn; Specifications; assemBLY; unpacking; and filter for best service, as shown in

SKU 65706 For technical questions, please call 1-800-444-3353. Page 7 FunctIOnaL descrIptIOn Specifications Maximum Air Pressure 90 PSI Air Inlet 1/4” -18 NPT Strokes per Minute* 2800 SPMAir Consumption 9 SCFM @ 90 PSI Cutting Capacity 18 Gauge sheet steel Cutter Swivel 360° left or right Cutting Wi...

Page 8 - Air flow, and therefore tool perfor

SKU 65706 For technical questions, please call 1-800-444-3353. Page 8 operation. Add a few more drops after each hour of continual use.Attach an air hose to the compres- 2. sor’s air outlet. Connect the air hose to the air inlet of the tool. Other com- ponents, such as a connector and quick coupler,...

Page 9 - OperatIng InstructIOns; tool set up; way not specifically explained; Work piece and Work area set up

SKU 65706 For technical questions, please call 1-800-444-3353. Page 9 OperatIng InstructIOns read the entIre ImpOrtant saFetY InFOrmatIOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.Inspect tool before use, looking for dam...

Page 10 - general Operating Instructions; your fingers doing this.; cautIOn! tO preVent tOOL; If the tool still does not have sufficient

SKU 65706 For technical questions, please call 1-800-444-3353. Page 10 general Operating Instructions If an automatic oiler is not used, 1. add a few drops of Pneumatic Tool Oil to the airline connection before use. Add a few drops more after each hour of continual use.Mark the line you want to cut ...

Page 11 - InstructIOns; Procedures not specifically; Lubrication; maintained and the moisture filter

SKU 65706 For technical questions, please call 1-800-444-3353. Page 11 user-maIntenance InstructIOns Procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent serIOus InjurY FrOm accIdentaL OperatIOn: turn off the tool, detach the air supply, s...

Page 12 - If the Laser Light ceases to function, check the batteries.; troubleshooting; problem; tool. disconnect air supply before service.

SKU 65706 For technical questions, please call 1-800-444-3353. Page 12 If the Laser Light ceases to function, check the batteries. troubleshooting problem possible causes Likely solutions Decreased output. Not enough air pressure and/ 1. or air flow. Obstructed trigger. 2. Incorrect lubrication or n...

Page 13 - pLease read the FOLLOWIng careFuLLY; parts LIst

SKU 65706 For technical questions, please call 1-800-444-3353. Page 13 pLease read the FOLLOWIng careFuLLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR...

Page 14 - assemBLY dIagram

SKU 65706 For technical questions, please call 1-800-444-3353. Page 14 assemBLY dIagram

Page 15 - able individually as replacement parts.; 0 daY WarrantY; vary from state to state.

SKU 65706 For technical questions, please call 1-800-444-3353. Page 15 record product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as ...