Central Pneumatic 43760 - Manuals

Page 2 - Unpacking; Contents

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 2 Unpacking When unpacking, check to make sure the product is intact and undamaged. If any parts aremissing or broken, please call Harbor Freight Tools at the number on the cover of thismanu...

Page 3 - Specifications; Read all instructions before using this tool!

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 3 Specifications Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions,operating and maintenance procedures, parts list and diagram. Keep y...

Page 6 - Air Connection; Control Layout; FIGURE 1

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 6 Air Connection For best service you should incorporate a regulator and inline filter, as shown in the diagramabove. Hoses, couplers, regulators, and filters are all available at Harbor Fre...

Page 7 - Preparation; General tips for Preparation:; Star t the air compressor.; A Comparison: Conventional versus HVLP Spray Guns; FIGURE 2

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 7 Preparation Note: Proper paint material mixture helps to ensure less problems. Be sure to follow the manufacturer’s directions. Most materials will spray readily if they are thinned proper...

Page 8 - Fan Direction and Pattern Adjustment

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 8 Fan Direction and Pattern Adjustment Fan Direction To change the direction of the fan from horizontal to vertical, loosen the Lock Ring andturn the Air Cap (1) 90 degrees. After the adjust...

Page 9 - Fan Direction and Pattern Adjustment (continued)

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 9 3. Turn the Fluid Control Knob (15) clockwise until it is fully closed. See FIGURE 1 onpage 6. 4. After setting up a piece of scrap material, squeeze the Trigger (32) in short bursts while...

Page 10 - Troubleshooting section at end of manual.; Techniques; FIGURE 6

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 10 2. To ensure you don’t allow paint to build up, start moving the Spray Gun before youSqueeze the Trigger (32). When you are finished spraying, release the Trigger (32)before you stop movi...

Page 11 - Maintenance; nonmetal container, and flush the metal container.

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 11 Maintenance SOLVENT SELECTION Always follow the paint manufacturer’s recommendations for cleaning, solvent type, and disposing of used solvent. Latex Paints: DO NOT USE LATEX PAINTS WITH ...

Page 12 - Parts List; PLEASE READ THE FOLLOWING CAREFULLY

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 12 NOTE: Some parts are listed and shown for illustration purposes only and are not availableindividually as replacement par ts. Parts List PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTUR...

Page 13 - Assembly Diagram

For technical questions, please call 1-800-444-3353; Troubleshooting section at end of manual. SKU 43760 Page 13 Assembly Diagram REV 10/03; 08/05 46 2 1 5 4 6 7 8 9 10 11 12 14 13 13 8 5 20 19 18 45 17 16 15 33 34 35 32 31 30 29 28 44 27 26 24 25 24 23 22 3 36 37 38 39 40 41 42 43 0 47 48

Page 14 - Troubleshooting; Spray Pattern Diagnosis

For technical questions, please call 1-800-444-3353. SKU 43760 Page 14 If the steps above do not solve the problem or if the repairs involved are too complex, contact a qualified technician. Troubleshooting Spray Pattern Diagnosis The Patterns below resemble symptoms of spray pattern problems. Pleas...

Page 15 - Problem

For technical questions, please call 1-800-444-3353. SKU 43760 Page 15 If the steps above do not solve the problem or if the repairs involved are too complex, contact a qualified technician. Troubleshooting (continued) 1. Low material level2. Cup tipped too far3. Clogged Air Vent4. Loose fluid inlet...

Page 16 - 0 Day Warranty

Page 20 For technical questions, please call 1-800-444-3353. SKU 67450 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and wo...