Cecilware GB4M-5.5-LD-U - Manuals

Page 2 - CONTENTS

CONTENTS Important Owner Information _____________________________________1 Introduction ____________________________________________________1 Important Safety Instructions ___________________________________2 Model Description _______________________________________________3 Specifications ________...

Page 3 - “Destination; WARNING

IMPORTANT OWNER INFORMATION Record the model number, serial number (identification plate is located behind front door), voltage and purchase date of your Cecilware Cappuccino Dispenser in the spaces below. Please have the information available when calling Cecilware for assistance. Model #: Serial #...

Page 4 - death, and to avoid damage to the equipment or property.; IMPORTANT SAFETY INSTRUCTIONS; WARNINGS; only; CAUTIONS

IMPORTANT! Read the following important safety instructions to avoid personal injury or death, and to avoid damage to the equipment or property. IMPORTANT SAFETY INSTRUCTIONS WARNINGS The GB8M-10-LD-U ( only ) is equipped with two (2) power switches and two (2) 120 volt grounded power cords. To avoi...

Page 5 - MODEL DESCRIPTION; *HOT WATER IS OPTIONAL, ADD “W” TO MODEL NUMBER

PLUG CONFIGURATION NEMA 5-15P NEMA 5-15R NEMA 5-15P NEMA 5-15R (2) DEDICATED OUTLETS 120 V 15 A Figure # 1 FOR GB8 MODELS ONLY MODEL DESCRIPTION GB8M-10-LD-U (shown) GB6M-10-LD-U (typical) These High Volume Cappuccino Dispensers will hold double the amount of your most popular flavor along with up t...

Page 7 - TO DIPENSE A CUP OF CAPPUCCINO:; Place a cup under the selected drink dispense nozzle.

START-UP PROCEDURE Caution: Make sure that the Heater Switches, are in the OFF position. 1. Connect the ¼ inch copper waterlines to the ¼ inch flare water inlet fittings of the valves. 2. Plug the power cords into dedicated receptacles. 3. Activate the Power Switch (Toggle Up). The door display pane...

Page 8 - TROUBLESHOOTING GUIDE; : To reduce the risk of electrical shock,; DISCONNECT POWER CORDS; before repairing; PROBLEM

TROUBLESHOOTING GUIDE WARNING : To reduce the risk of electrical shock, DISCONNECT POWER CORDS before repairing or replacing any internal components of the unit. Before any attempt to replace a component be sure to check all electrical connections for proper connection. PROBLEM PROBABLE CAUSE REMEDY...

Page 12 - WHIPPER CHAMBER; SLANTED; NOT; ITEM

11 5 7 1 12 8 6 4 3 10 2 9 WHIPPER CHAMBER 13 IMPORTANT: SLANTED WHIPPER CHAMBERS (SEE BELOW) ARE NOT INTERCHANGEABLE WITH STANDARD STRAIGHT WHIPPER CHAMBERS. BE SURE TO ORDER USING THE CORRECT PART NUMBERS. SLANTED WHIPPER CHAMBER MARKING 1 2 2 1 1 4 1 2 1 111 11 2 12 1 ITEM IMPELLER (1 FLAT) USE W...

Page 20 - UPPER DOOR

DESCRIPTION ITEM GB8 22 GB6 GB5 UPPER DOOR GB4M-5.5-LD-U, GB5-LD-U GB6M-10-LD-U, & GB8M-10-LD-U GB4

Page 21 - LOWER DOOR

DESCRIPTION ITEM GB6 23 GB8 GB5 GB4 LOWER DOOR GB4M-5.5-LD-U, GB5-LD-U GB6M-10-LD-U, & GB8M-10-LD-U