Capresso EC5O - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS; Read all instructions.

2. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always befollowed, including:1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electrical shock or personal injury, do not immersecord, plugs or appliance...

Page 3 - CAUTION; the ON/OFF switch is in the ‘OFF’ position.; TABLE OF CONTENTS; Page; Appliance Specifications

3. CAUTION This appliance is for household use. Any servicing other than cleaning anduser maintenance should be performed by an authorized service agent.1. Do not immerse in water or try to disassemble appliance.2. To reduce the risk of fire or electric shock, do not remove the base. No user service...

Page 4 - Fig. 1 Capresso EC50 User Components

4. a Fig. 1 Capresso EC50 User Components a. Removable Cup Warming Trayb. Removable Water Tankc. Steam Wandd. Black Frothing Sleeve (removable)e. On/Off Switchf. Removable Drip Trayg. Removable Gridh. Portafilteri. Thumb Guard j. Brew Head (with Screen and Center Screw) k. Selector Dial (Coffee /Ste...

Page 6 - Warming Internal Components and Cups; Note; Caution; Filling and Inserting the Portafilter; Note; Preparing Espresso

b. The SELECTOR DIAL has three positions: • RIGHT (cup symbol) brewing coffee,• MIDDLE (black dot) standby, brewing and steaming stops,• LEFT (steam symbol), steam production through the frother Note : During brewing or steaming, the blue READY indicator light will turn to red, specifying the heatin...

Page 7 - Preparing Cappuccino; Frothing Milk

c) When the blue ready light illuminates, turn the selector dial to the cup symbol on the right side. d) When the desired amount of espresso is brewed, stop the flow by turning the selector dial to the center position "•". Note : It is normal for the blue ready light to turn red during brewi...

Page 8 - Cleaning the Frothing Sleeve and Steam Wand

Note : To increase the temperature of the frothed milk, stop the frothing action, set the pitcher aside and pull off the black frother sleeve. Now insertthe frothing wand into the milk again and continue steaming. The milk willget hotter without any additional frothing action. Note : You can also fi...

Page 9 - Decalcifying the brew head; coffee residue with a damp cloth.; Decalcifying the frother; Turn the handle of the portafilter further to the right.

Wipe the brew head with a damp cloth. Caution: HOT! Danger of burningor scalding! • Rinse the water tank, the support grid and tray regularly with water.• Empty the drip tray regularly.• If the inner screen inside the brew head accumulates coffee oils, it can be unscrewed for thorough cleaning. Note...

Page 11 - Use milk of fridge temperature.; Water container drips when removed; Valve in base may be stuck.; Uneven cup filling; Appliance has not been rinsed properly after decalcifying.; Missing parts; Contact Jura Capresso Customer Service, see chapter 17.; Latte

C) Milk was too warm from the start. Use milk of fridge temperature. D) Not enough milk to froth. Use more cold milk. Water container drips when removed Valve in base may be stuck. Use finger to push valve back into place while holding the container over a sink. Uneven cup filling A) Outlet in porta...

Page 12 - or failure to follow instructions contained in this manual.; Capresso EC50, Model #117 Product Registration; Mon-Thu 8AM – 9PM • Fri 8AM – 8PM • Sat 9AM – 5PM; Customer Service

16. LIMITED ONE-YEAR WARRANTY This warranty covers your CAPRESSO machine, model #117 espresso machine.The model # can be found on the bottom of the machine. This warranty is ineffect for one year from the date of the first consumer purchase. This warrantycovers all defects in materials or workmanshi...