Capresso S7 - Manual - manualsarea.com

Page 2 - CAUTION; Michael Kramm, President

D. This appliance has a polarized plug (one blade is widerthan the other). As a safety feature, this plug will fit in apolarized outlet only one way. If the plug does not fit fully inthe outlet, reverse the plug. If it still does not fit, contact aqualified electrician. Do not attempt to defeat this...

Page 4 - COFFEE READY; C O F F E E; Operating Display

A. B. C. D. E. FIG. 2 FIG. 3 FIG. 3A Display Dialog System ON/OFF Button SPECIAL COFFEE Button 1-CUP SMALL Button 1-CUP LARGE Button RINSE Button 2-CUP SMALL Button 2-CUP LARGE Button STEAM PORTION Button Selector Switch for Coffee or Hot Water PERMANENT STEAM Button K. L. M. FIG. 4 4. GROUND Coffee...

Page 8 - TABLE OF CONTENTS; PAGE

Important Safeguards / Jura Capresso . . . . . . . . . . . . . . . . . 1-2Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 1. Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 9 - PRODUCT REGISTRATION

1. PRODUCT REGISTRATION Please read the enclosed product registration form now. Fill it outand mail or fax it to us within two weeks after purchasing yourmachine or register online through our website: www.capresso.com. Important: This registration is part of your warranty. 2. CUSTOMER SERVICE Thank...

Page 11 - SPECIAL COFFEE; PREPARING THE MACHINE FOR THE FIRST TIME; PERMANENT STEAM; All Display Messages Are Shown in GREEN

PLEASE, DO... • Fill water tank with fresh, cold water only. • Remove any foreign particles (small stones) from coffee beans.• Let frozen beans thaw for 3 to 4 hours before pouring them into the bean container. 6. FACTORY SETTINGS Each machine leaves the factory with the settings describedbelow. To ...

Page 12 - CUP ILLUMINATION; ADJUSTING THE GRINDER; RINSE

RINSE UNIT • Place a container under the coffee-spout (Fig. 8b) and press the RINSE button (Fig. 2,F). UNIT RINSINGCOFFEE READY Attention: You can only make coffee when the display reads COFFEE READY . CUP ILLUMINATION The cup illumination adds a dramatic touch to brewing coffee.Providing the machin...

Page 14 - 1b. PROGRAMMING THE CLARIS CARTRIDGE; 1c. REPLACING THE CLARIS CARTRIDGE; CLARIS; MAKING ESPRESSO AND “CREMA COFFEE”

cartridge (Fig.12). • Insert the cartridge with its tapered end down and the exten- sion piece up. Make sure it fits snugly over the white mesh piece inside the water container. Push down gently (Fig.13). • Close the holder for the cartridge so that it engages in the water tank (Fig.12). • Fill the ...

Page 16 - 4a. USING THE DUAL FROTHER PLUS; PERMANENT; 4b. CLEANING THE DUAL FROTHER PLUS; Cleaning the steam nozzle:; 4c. USING THE FROTHXPRESS PLUS SYSTEM

14a. USING THE DUAL FROTHER PLUS Frothing Position: The cylinder of the frother is pushed down. Steaming Position: The cylinder is pushed up ( see Fig. 14). • Fill at least 4 to 5 oz. of cold milk into a frothing pitcher. The pitcher should have at least a 10 to 12 oz. capacity. You can also use a l...

Page 17 - 4d. USING THE FROTHXPRESS PLUS SYSTEM

• Assemble the milk container as shown in Fig. 15.• Attach the frothXpress-PLUS system as shown in Fig. 15a. Important: This system siphons milk and mixes it inside the frothXpress with hot steam. It is necessary that all parts are con-nected tightly, otherwise the siphoning process will not work. F...

Page 18 - 4f. CLEANING THE FROTHXPRESS PLUS; 4g. CLEANING THE MILK CONTAINER; The following functions can be programmed:

• Now froth or steam as described in chapter 14c. 14e. HOT CHOCOLATE, CAFE MOCHA For hot chocolate fill the milk container with the desired amountof chocolate syrup, add cold milk and stir well. Then proceed asdescribed under "Frothing". Adding a shot or two of espressomakes it a Café Mocha....

Page 20 - PROGRAMMING STEAM PORTION

When the actual brewing starts the display alternates thefollowing messages: ENOUGH COFFEE? and PRESS KEY P . • When the desired amount of coffee is in your cup, press the P button. The machine stops brewing and the display shows: –_ _ _ ll_ _ _+ At this time you have two options: Option 1 : Press t...

Page 23 - EMPTYING THE USED WATER TRAY; EMPTY TRAY; STONES AND BEANS; Before Filling Beans into the Bean Container:

• Remove the used water tray carefully since there is water init (Fig.1, Fig.18, Fig.19) ATTENTION: Do not unplug the machine while you are emptying the coffee grounds.• Empty the used coffee container and the water tray(drawer).• Make sure the two metallic contacts of the drawer are clean and dry (...

Page 26 - TIPS FOR PERFECT COFFEE

• Turn selector switch (Fig. 3L) to the water symbol and press the DECALC button (Fig. 3A, T1). • The machine will pump the mixture in intervals through the steam nozzle into the container underneath. During this time the display will show: UNIT DECALC/PLEASE WAIT After about 12 minutes the machine ...

Page 27 - All these supplies are available through:; Other limitations and exclusions:

Grinding Please refer to chapter 8 "Adjusting the Grinder." Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is towarm your cups. Sugar and cream Warmth is lost by stirring the contents of the cup. Adding milkor ...

Capresso S7 - Manual

Table of Contents:

Summary

Other Capresso Models