Cambridge Audio LK10 - Manuals

The LK10 is fitted on the wall by fixing it into a double USA-type J-Box (electrician’s back-box). All knock-outs in the back-box should be removed to provide maximum ventilation. Where it is desired to fit a mains lighting switch etc next to a keypad, a barrier-box or twosingle back-boxes must be u...

7 Power requirement The LK10 runs on 24 V DC (@ 250mA max) supplied through the connecting cable fromthe KP10 keypad. As such there is no mains voltage present in the KP10 and the unit isoften safe to fit in areas where only extra low voltage (ELV) equipment is permitted.However, it is imperative th...

8 Buttons numbered 1-8 have dual functions, whichare controlled by the Shift button. These buttons generate IR codes or macros cloned from thebuttons of the same name on the LR10 learningremote (see later section on Cloning). Primary functions Secondary functions Play Enter Skip forward Up Skip back...

The LK10 can only be used to control source equipment once ithas been cloned from the LR10. This transfers the necessary IRcodes and macros into the LK10. The Incognito LR10 is asophisticated learning remote which is able to learn the codes ofall the source equipment from their own remotes. Once the...

11 3. Press the Enter button on the remote. Display shows ‘SENDING’. LK10 keypad - Receiving data LR10 remote - Transmitting data 2. Press the button on the remoteuntil ‘TRX’ is flashing. 1. Press and hold the Set button for five seconds. When ‘LEARN’ is displayed,release the button. ‘READY’ will th...

Note: You still use your KP10 keypad to control audio functions (volume adjustment, sourceselection etc). To personalise other settings of the LK10, press and hold the Set button for four seconds to activate the Settings menus (Fig. 1). The LK10 screen will continuously scroll through thefive menu o...

Settings menus Days When selecting ‘DAYS’, use the and keys to scroll to single day,Monday to Friday, weekend or everyday. On/Off When the alarm is selected on, the Alarm icon will appear on the display. Alarm menu Press the Set button for five seconds and release when ‘ALARM?’ is displayed on the s...

15 LK10 ENGLISH Sleep menu This menu allows you to set the time at which the LK10 will automatically switch off.Press the Set button for five seconds and release when ‘SLEEP?’ is displayed on the screen. Use the and buttonsto navigate the menu. Use the and buttons toadjust the desired option. (Set) ...

16 Setup menu This menu lets the user manually set the time and date of the LK10. Press the Set button for five seconds and release when ‘SETUP?’ is displayed on the screen. Use the and buttonsto navigate the menu. Use the and buttons toadjust the desired option. Note: The time and date will also be...

17 LK10 ENGLISH Configure menu Press the Set button for five seconds and release when ‘CONFIG?’ is displayed on the screen. Use the and buttonsto navigate the menu. Use the and buttons toadjust the desired option. 12/24 Hour - Controls the clock display in either 12 or 24 hour format. DD/MM - Sets t...

18 Troubleshooting If the LK10 becomes locked and/or ‘ERROR’ appears on the display due to a powerinteruption or during cloning, follow these steps: 1. Unplug the power to the system and plug back in after one minute.2. When the power resumes, the LK10 will display distorted text.3. Clone the LR10 t...

19 LK10 ENGLISH Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject tothe terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio’s option) thisproduct or any defective parts in this product. Warranty periods may vary from co...