Brother IntelliFax-2580C- Manuals

iv Notice - Disclaimer of Warranties (USA and Canada) BROTHER'S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER'S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULA...

vii BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE LIMITED WARRANTY (Canada only) Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts,Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized ServiceCenters, will repair this MFC/Facsimile m...

viii Table of Contents Section I General 1 General Information Using the documentation ....................................................................................... 3 Symbols and conventions used in the documentation .................................... 3 Control panel overview ..............

ix 4 Security features TX Lock (FAX-2480C only) .................................................................................. 24 Setting and changing the TX Lock password ................................................ 24Turning the TX Lock on/off .................................................

xi Managing your messages ................................................................................... 58 Message Indicator ......................................................................................... 58Playing voice messages .........................................................

xii Copy options ........................................................................................................ 75 Changing copy quality ................................................................................... 76Enlarging or reducing the image copied ...............................

xiii C Menu and Features On-screen programming.................................................................................... 118 Menu table ................................................................................................... 118Memory storage........................................

Section I General I General Information 3 Loading documents and paper 7 General setup 18 Security features 24

Chapter 1 4 Control panel overview 1 FAX-2480C FAX-2580C 1 13 3 2 12 14 15

7 2 2 Loading documents 2 You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass. Using the ADF 2 The ADF can hold up to 10 pages and feeds each sheet individually. Use standard 20 lb (80 g/m 2 ) paper and always fan the pages before putting the...

Chapter 2 8 Using the scanner glass 2 You can use the scanner glass to fax, copy or scan pages of a book or one page at a time. Document Sizes Supported 2 How to load documents 2 Note To use the scanner glass, the ADF must be empty. a Lift the document cover. b Using the document guidelines on the l...

Loading documents and paper 9 2 Scannable area The scannable area depends on the settings in the application you are using. The figures below show the areas you cannot scan on paper. Acceptable paper and other media 2 The print quality can be affected by the type of paper you are using in the machin...

Chapter 2 10 Recommended media 2 To get the best print quality, we suggest using Brother paper. (See table below.) We recommend using ‘3M Transparency Film’ when you print on transparencies. 1 Available in the USA and from November 2006 in Canada. Handling and using media 2 „ Store paper in its orig...

Loading documents and paper 11 2 Choosing the right media 2 Paper type and size for each operation 2 Paper Type Paper Size Usage Fax Copy Print Cut Sheet Letter 8 1/2 × 11 in. (216 × 279 mm) Yes Yes Yes A4 8.3 × 11.7 in. (210 × 297 mm) Yes Yes Yes Legal 8 1/2 × 14 in. (216 × 356 mm) Yes Yes Yes Exec...

Chapter 2 12 Paper weight, thickness and capacity 2 1 Up to 50 sheets for Legal size paper 20 lb (80 g/m 2 ). Up to 100 sheets of 20 lb (80 g/m 2 ) paper. Paper Type Weight Thickness No. of sheets Cut Sheet Plain Paper 17 to 32 lb (64 to 120 g/m 2 ) 0.003 to 0.006 in. (0.08 to 0.15 mm) 100 1 Inkjet ...

Chapter 2 16 How to load envelopes and post cards 2 a Before loading, press the corners and sides of the envelopes or post cards to make them as flat as possible. Note If the envelopes or post cards are ‘double-feeding,’ put one envelope or post card in the paper tray at a time. b Put the envelopes ...

Loading documents and paper 17 2 Printable Area 2 The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. The machine can only print in the shaded areas when the Borderless print feature is available ...

18 3 On/Off key 3 When the machine is idle, you can turn it on and off by pressing the On/Off key. Note If you have connected an external telephone or TAD, it is always available. Turning the machine off 3 a Press and hold down the On/Off key until the LCD shows Shutting Down . The LCD light goes of...

General setup 19 3 1 You cannot receive a fax with Black Start or Color Start . 2 You can receive telephone calls by lifting the handset (FAX-2480C) or using the cordless handset (FAX-2580C). 3 FAX-2480C 4 (FAX-2580C) When an external TAD is connected and Easy Receive is turned on. 5 FAX-2580C 6 (FA...

Chapter 3 20 Paper settings 3 Paper Type 3 To get the best print quality, set the machine for the type of paper you are using. a Press Menu , 1 , 2 . b Press a or b to choose Plain Paper , Inkjet Paper , Brother Photo , Other Photo or Transparency . Press OK . c Press Stop/Exit . Note The machine ej...

General setup 21 3 Speaker Volume 3 You can choose a range of speaker volume levels, from High to Off . a Press Menu , 1 , 4 , 3 . b Press a or b to choose Low , Med , High or Off . Press OK . c Press Stop/Exit . You can also adjust the speaker volume by pressing Hook/Hold or Speaker Phone . a Press...

General setup 23 3 LCD display 3 LCD Contrast 3 You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty reading the LCD, try changing the contrast setting. a Press Menu , 1 , 7 . b Press a or b to choose Light or Dark . Press OK . c Press Stop/Exit .

24 4 TX Lock (FAX-2480C only) 4 TX Lock lets you prevent unauthorized access to the machine. You will not be able to continue to schedule Delayed Faxes or Polling jobs. However, any pre-scheduled Delayed Faxes will be sent even if you turn on TX Lock, so they will not be lost. While TX Lock is On, t...

Security features 25 4 Turning the TX Lock on/off Turning TX Lock on 4 a Press Menu , 2 , 0 , 1 . b Press a or b to choose Set TX Lock . Press OK . c Enter the registered 4-digit password.Press OK . The machine goes offline and the LCD shows TX Lock Mode . Turning TX Lock off 4 a Press Menu . b Ente...

Section II Fax II Sending a fax 28 Receiving a Fax 35 Telephone Services and External devices 41 Dialing and storing numbers 51 Message Center (FAX-2580C only) 56 Remote fax options (Black & White only) 61 Printing Reports 68 Polling 70

28 5 Entering Fax mode 5 To enter fax mode, press ( Fax ), and the key will glow green. The LCD will show the new job number and the memory available.The number of pages you can scan into the memory will vary depending on the data that is printed on them. Faxing from the ADF 5 a Make sure you are in...

Sending a fax 29 5 Faxing A4 size documents from the scanner glass 5 When documents are A4 size, you need to set Scan Size to A4. If you do not, the bottom portion of the faxes will be missing. a Make sure you are in Fax mode . b Press Menu , 2 , 2 , 0 . c Press a or b to choose A4 . Press OK . Colo...

Sending a fax 31 5 Contrast 5 If your document is very light or very dark, you may want to change the contrast. Use Light when sending a light document. Use Dark when sending a dark document. a Make sure you are in Fax mode . b Load your document. c Press Menu , 2 , 2 , 1 . d Press a or b to choose ...

Chapter 5 32 Dual access (Black & White only) 5 You can dial a number and start scanning the fax into memory—even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory. The number of pages you can scan into the memory ...

Sending a fax 33 5 Overseas Mode 5 If you are having difficulty sending a fax overseas due to possible interference on the phone line, we recommend that you turn on the Overseas mode. After you send a fax using this feature, the feature will turn itself off. a Make sure you are in Fax mode . b Load ...

Chapter 5 34 Sending a fax manually 5 Manual transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. a Make sure you are in Fax mode . b Load your document. c To listen for a dial tone do one of the following: „ (FAX-2480C) Press Hook/Hold or pick up the handset....

35 6 6 Receive modes 6 You must choose a receive mode depending on the external devices and telephone subscriber services you have on your line. The diagrams below will help you choose the correct mode. For more detailed information about the receive modes see page 37. Choosing the Receive Mode 6 FA...

Receiving a Fax 37 6 Using receive modes 6 Some receive modes answer automatically ( Fax Only and Fax/Tel ). You may want to change the ring delay before using these modes. See Ring Delay on page 38. Fax only 6 Fax only mode will automatically answer every call. If the call is a fax your machine wil...

Chapter 6 38 Receive mode settings 6 Ring Delay 6 The Ring Delay sets the number of times the machine rings before it answers in Fax Only or Fax/Tel mode. If you have external or extension phones on the same line as the machine or subscribe to the telephone company’s Distinctive Ring service, keep t...

Receiving a Fax 39 6 Easy Receive 6 If Easy Receive is On : 6 The machine receives a fax call automatically, even if you answer the call. When you see Receiving on the LCD or when you hear “chirps” through the handset you are using, just replace the handset or press Speaker Phone . Your machine will...

41 7 7 Voice operations 7 Voice calls can be made either with the handset, the cordless handset (FAX-2580C), the speaker phone (FAX-2580C), an extension or external telephone, and by dialing manually, or by using One-Touch or Quick-Dial numbers. Note If you have FAX-2580C, see the Digital Cordless H...

Telephone Services and External devices 43 7 Telephone services 7 Your machine supports the Caller ID and Distinctive Ring subscriber telephone services that some telephone companies offer. Features like Voice Mail, Call Waiting, Call Waiting/Caller ID, RingMaster, answering services, alarm systems ...

Chapter 7 44 Before you choose the ring pattern to register 7 You can only register one Distinctive Ring pattern with the machine. Some ring patterns cannot be registered. The ring patterns below are supported by your Brother machine. Register the one your telephone company gives you. Note If the ri...

Telephone Services and External devices 45 7 Caller ID 7 The Caller ID feature lets you use the Caller ID subscriber service offered by many local telephone companies. Call your telephone company for details. This service shows the telephone number, or name if it is available, of your caller as the ...

Chapter 7 46 Connecting an external TAD (telephone answering device) 7 You may choose to connect an external answering device. However, when you have an external TAD on the same telephone line as the machine, the TAD answers all calls and the machine ‘listens’ for fax calling (CNG) tones. If it hear...

Telephone Services and External devices 47 7 e Set the TAD to answer calls. f Do one of the following: „ (FAX-2480C) Set the Receive Mode to External TAD . (See Choosing the Receive Mode on page 35.) „ (FAX-2580C) Set the Receive Mode to Manual with Easy Receive turned on. Recording an outgoing mess...

Chapter 7 48 Converting telephone wall outlets 7 There are three ways to convert to an RJ11 jack. The first two ways may require help from the telephone company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks. Or you can have an RJ11 wall outlet installed and slave or jump one ...

Chapter 7 50 If you answer a call and no one is on the line: 7 You should assume that you're receiving a manual fax. Press l 5 1 and wait for the chirp or until the LCD shows Receiving , and then hang up. Note You can also use the Easy Receive feature to make your machine automatically take the call...

51 8 8 How to Dial 8 Manual dialing 8 Press all of the digits of the fax number. One-Touch dialing 8 Press the One-Touch key that stores the number you want to call. To dial the One-Touch numbers shown in the gray squares, hold down Shift as you press the One-Touch key. Speed-Dialing 8 a Press Searc...

Chapter 8 52 Search 8 You can search for names you have stored in the One-touch and Speed-Dial memories. Press Search/Speed Dial and the navigation keys to search, or use the dial pad to search alphabetically. 1 To search numerically. 2 To search alphabetically, you can use the dial pad to enter the...

Dialing and storing numbers 53 8 Storing numbers 8 You can set up your machine to do the following types of easy dialing: One-Touch, Speed-Dial and Groups for broadcasting faxes. When you dial a Quick-Dial number, the LCD shows the name, if you stored it, or the number. Note If you lose electrical p...

Chapter 8 54 Storing Speed-Dial numbers 8 You can store up to 80 (FAX-2480C) or 100 (FAX-2580C) 2-digit Speed-Dial locations with a name. When you dial you will only have to press a few keys (For example: Search/Speed Dial , # , the two-digit number, and Black Start or Color Start ). a Press Menu , ...

56 9 Message Center Mode 9 The Message Center feature will store up to 99 incoming messages. Messages are stored in the order in which they are received. Voice messages can be up to 3 minutes in length, and can also be picked up remotely (See Setting a Remote Access Code on page 64.) The number of m...

Message Center (FAX-2580C only) 57 9 Listening to your OGM 9 a Press Menu , 2 , 7 , 1 . b Press a or b to choose Msg Ctr OGM . Press OK . c Press a or b to choose Play OGM . Press OK . d Press Stop/Exit . Erasing your OGM 9 a Press Menu , 2 , 7 , 1 . b Press a or b to choose Msg Ctr OGM or F/T OGM ,...

Chapter 9 58 Managing your messages 9 Message Indicator 9 The light flashes if you have any new messages waiting for you.The LCD displays the total number of voice and fax messages stored in the Message Center memory. Voice:03 Fax:00 Fax messages are only stored when Fax Storage is turned on. To tur...

Message Center (FAX-2580C only) 59 9 To erase all of your messages 9 a Press Erase . b Press a or b to choose one of the options below. Then press OK . c Do one of the following: „ Press 1 to erase all of your messages. „ Press 2 to cancel. d Press Stop/Exit . Additional Message Center operations 9 ...

Chapter 9 60 c Press a or b to choose Toll Saver . Press OK . d Press a or b to choose On (or Off ). Press OK . e Press Stop/Exit . ICM Recording Monitor 9 This feature lets you turn the speaker volume for voice messages On or Off . When you turn the monitor Off , you will not hear messages as they ...

61 10 10 You can only use one remote fax option at a time: „ Fax Forwarding „ Paging „ Fax Storage „ Off You can change your selection at any time. If received faxes are still in the machine’s memory when you change the remote fax options, an LCD question will appear. (See Changing Remote Fax Option...

Chapter 10 62 Paging 10 When you choose Paging, your machine dials the pager number you have programmed, and then dials your PIN (Personal identification Number). This activates your pager so you will know that you have a fax message in the memory. If you have set Paging, a backup copy of the receiv...

Chapter 10 64 Remote Retrieval 10 You can call your machine from any touch tone telephone or fax machine, then use the remote access code and remote commands to retrieve fax messages. Setting a Remote Access Code 10 The remote access code lets you access the remote retrieval features when you are aw...

Remote fax options (Black & White only) 65 10 Remote Fax commands 10 Follow the commands below to access features when you are away from the machine. When you call the machine and enter your remote access code (3 digits followed by l ), the system will give two short beeps and you must enter a r...

Remote fax options (Black & White only) 67 10 Retrieving fax messages 1 0 You can call your machine from any touch tone phone and have your fax messages sent to a machine. a Dial your fax number. b When your machine answers, enter your remote access code (3 digits followed by l ) at once. If you...

68 11 Fax reports 11 You need to set up the Transmission Verification Report and Journal Period using the Menu keys. Transmission Verification Report 11 You can use the Transmission Report as proof that you sent a fax. This report lists the time and date of transmission and whether the transmission ...

Printing Reports 69 11 Reports 1 1 The following reports are available: 1.Transmission Prints a Transmission Verification Report for your last transmission. 2. Help List A help list about how to quickly program your machine. 3. Quick-Dial Lists names and numbers stored in the One-Touch and Speed-Dia...

70 12 Polling overview 12 Polling lets you set up your machine so other people can receive faxes from you, but they pay for the call. It also lets you call somebody else’s fax machine and receive a fax from it, so you pay for the call. The polling feature needs to be set up on both machines for this...

Polling 71 12 Polled transmit (Black & White only) 1 2 Polled transmit lets you set up your machine to wait with a document so another fax machine can call and retrieve it. The document will be stored and can be retrieved by any other fax machine until you delete it from the memory. (See Checkin...

74 13 How to copy 13 Entering Copy mode 13 Press ( Copy ) to enter Copy mode. The default setting is Fax. You can change the number of seconds or minutes that the machine stays in Copy mode. ( Mode Timer on page 19.) The LCD shows the default copy setting: 1 Copy Ratio 2 Quality 3 No of Copies Makin...

Making copies 75 13 Copy options 1 3 When you want to quickly change the copy settings temporarily for the next copy, use the Copy Options key. The machine returns to its default settings 60 seconds after it finishes copying, or if the mode timer returns the machine to Fax mode. For more information...

Chapter 13 76 Changing copy quality 13 You can choose from a range of quality settings. The default setting is Normal . To temporarily change the quality setting, follow the instruction below: a Make sure you are in Copy mode . b Load your document. c Use the dial pad to enter the number of copies (...

Making copies 77 13 e Choose one of the options below: „ Use a or b to choose the enlargement or reduction ratio you want. Press OK . „ Use a or b to choose Custom (25–400%) . Press OK . Use the dial pad to enter an enlargement or reduction ratio from 25% to 400% . (For example, press 5 3 to enter 5...

Chapter 13 80 Paper options 13 Paper type 13 If you are copying on special paper, be sure to choose the type of paper you are using so you will get the best print quality. a Make sure you are in Copy mode . b Load your document. c Use the dial pad to enter the number of copies (up to 99). d Press Co...

Section IV Appendixes I V Safety and Legal 82 Troubleshooting and Routine Maintenance 93 Menu and Features 118 Specifications 128 Glossary 139

82 A Choosing a location A Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the machine near a telephone wall jack and a standard AC power outlet. Choose a location where the temperature remains between 50 ° F and 95 ° F (10 ° and 35 ° C). CAUTION ...

Safety and Legal 83 To use the machine safely A Please keep these instructions for later reference and read them before attempting any maintenance. Note (FAX-2580C only)If there are faxes in the machine's memory, you need to print them or save them before you unplug the machine from the AC power out...

Safety and Legal 87 Important safety instructions A 1 Read all of these instructions. 2 Save them for later reference. 3 Follow all warnings and instructions marked on the product. 4 Unplug this product from the wall outlet before cleaning the inside of the machine. Do not use liquid or aerosol clea...

Safety and Legal 91 Industry Canada Compliance Statement (Canada only) A This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Legal limitations for copying A Color reproductions of certain documents are illeg...

92 Trademarks A The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. © 2006 Brother Industries, Ltd. All rights reserved. Windows and Mi...

93 B Troubleshooting B IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. If you think there is a problem with your machine, check the chart below and follow the troubleshooting tips. Most problems can be easily resolved...

Troubleshooting and Routine Maintenance 95 Receiving Faxes Difficulty Suggestions Cannot receive a fax Check all line cord connections. Make sure the machine is in the correct receiving mode for your setup. (See Receive modes on page 35.) If you often have interference on the phone line, try changin...

Troubleshooting and Routine Maintenance 97 Error messages B As with any sophisticated office product, errors may occur. If this happens, your machine identifies the error and shows an error message. The most common error messages are shown below. You can correct most errors by yourself. If you need ...

Troubleshooting and Routine Maintenance 101 Transferring your faxes or Fax Journal report B If the LCD shows: Change Unable XX , Clean Unable XX , Init. Unable XX , Print Unable XX , Scan Unable XX or Tel Disabled XX , we recommend transferring your faxes to another fax machine. (See Transferring fa...

102 Document is jammed inside the ADF unit B a Take out any paper from the ADF that is not jammed. b Lift the document cover. c Pull the jammed document out to the left. d Close the document cover. e Press Stop/Exit . Printer jam or paper jam B Take out the jammed paper depending on where it is jamm...

Troubleshooting and Routine Maintenance 103 e Put the Jam Clear Cover back on.Make sure the cover is set properly. f Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover (1) until it locks securely into the open position.Make sure that there is no jammed pape...

104 Phone line interference B If you are having problems sending or receiving a fax due to possible interference on the phone line, we recommend that you adjust the Equalization for compatibility to reduce the modem speed for fax operations. a Press Menu , 2 , 0 , 2 . b Press a or b to choose Normal...

Troubleshooting and Routine Maintenance 107 Clean the outside of the machine as follows: B a Pull the paper tray (1) completely out of the machine. b Wipe the outside of the machine with a soft cloth to remove dust. c Remove anything that is stuck inside the paper tray. d Lift the output paper tray ...

Troubleshooting and Routine Maintenance 109 Cleaning the print head B To ensure the good print quality, the machine will regularly clean the print head. You can start the cleaning process manually if needed. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics...

Troubleshooting and Routine Maintenance 111 g For 1200 dpi, press the number of the test print that most closely matches the number 0 sample (1-8). 1200dpi Adjust Select Best #5 h Press Stop/Exit . Checking the ink volume B You can check the ink that is left in the cartridge. a Press Ink (FAX-2480C)...

Troubleshooting and Routine Maintenance 113 Uninstalling and installing the cradle and the bracket (FAX-2580C) B Uninstalling the cradle and the bracket B If you want to use the cordless handset separately from the machine, you can remove the cradle and the bracket. a Unplug the AC adapter from AC p...

Chapter B 114 b Align the recessed arrows on the bracket with those on the machine, and then slide the bracket toward the front of the machine until it clicks into place. c Make sure you plug the connector into the jack (1) and route the cable through the hook (2) as shown below. d Press the tab (1)...

118 C On-screen programming C Your machine is designed to be easy to use with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your machine has to offer. Since your programming is done on the LCD, we have created step-b...

Menu and Features 119 Menu keys C To access the menu mode: a Press Menu . b Choose an option. „ Press 1 for General Setup menu. „ Press 2 for Fax menu. „ Press 3 for Copy menu. „ Press 0 for Initial Setup. You can scroll more quickly through each menu level by pressing a or b for the direction you w...

120 Menu Table C The menu table will help you understand the menu selections and options that are found in the machine's programs. The factory settings are shown in Bold with an asterisk. Choose & OK Choose & OK to accept to exit Main Menu Submenu Menu Selections Options Descriptions Page 1....

Menu and Features 127 Entering Text C When you are setting certain menu selections, such as the Station ID, you may need to enter text into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0 , # and l do not have printed letters because they are used for speci...

128 D General D Specifications D Memory Capacity 16 MB Memory Backup Approx. 24 hours (FAX-2580C only) ADF (automatic document feeder) Up to 10 pages Temperature: 68 ° F - 86 ° F (20 ° C - 30 ° C) Humidity: 50% - 70% Paper: [20 lb (80 g/m 2 )] A4 or Letter size Paper Tray 100 Sheets [20 lb (80 g/m 2...

130 Print media D 1 Use only transparencies recommended for inkjet printing. 2 For glossy paper or transparencies, we recommend removing printed pages from the output paper tray immediately after they exit the machine to avoid smudging. 3 See Paper type and size for each operation on page 11. Paper ...

Specifications 133 Digital Cordless Handset (FAX-2580C only) D Cordless handset D 1 When Voice Enhance is set to On. 2 When Voice Enhance is set to Off. Battery D Frequency 5.8 GHz Technology FHSS (Frequency Hopping Spread Spectrum) Multi Handset Capability Up to 4 handsets Dimensions Weight (includ...

136 Printer D Note You can download the free Brother Printer Driver and PC-FAX Send driver from the Brother Solutions Center for use. Visit us at: http://solutions.brother.com • Please download the printer driver first before connecting the machine to your computer with the USB cable. • You must use...

Specifications 137 Interface D 1 Your machine has a USB 2.0 Full-speed interface. This interface is compatible with USB 2.0 Hi-Speed; however, the maximum data transfer rate will be 12 Mbits/s. The machine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are ...

138 Consumable items D Ink The machine uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly. Service Life of Ink Cartridge The first time you install the ink cartridges, the machine will use extra ink to fill the ink delivery tube. This is a o...

139 E This is a comprehensive list of features and terms that appear in Brother manuals. Availability of these features depends on the model you purchased. Glossary E ADF (automatic document feeder) The document can be placed in the ADF and scanned one page at a time automatically. Auto Reduction Re...

Index 143 F A Accessories and supplies ......................... iii ADF (automatic document feeder) ...... 7 , 28 Answering machine (TAD) ....................... 46 connecting ............................................ 46 Apple ® Macintosh ® ................................ 136 Automatic fax rece...

EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) NOTICE This product meets the applicable Industry Canada technical specifications. NOTICE The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface m...

Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web http://www.brother.com These machines are made ...