Broan E4DLSR - Manuals - manualsarea.com

Page 3 - INTERNAL BLOWERS

HL0097 - 3 - RMP SERIES BACKSPLASH (S TAINLESS S TEEL WALL COVERING WITH WARMING SHELVES . O PTIONAL .) 8” R OUND A DJUSTABLE E LBOW M ODEL 412 T RANSITION (3¼” X 10” TO 7”) A DAPTER /D AMPER 3¼’’ X 10’’ ( SUPPLIED WITH SINGLE BLOWER HOOD ) A DAPTER 4½” X 18½” ( SUPPLIED WITH DOUBLE BLOWER HOOD ) S ...

Page 4 - IN-LINE AND EXTERIOR BLOWERS

- 4 - HL009 8 RMP SERIES BACKSPLASH (S TAINLESS S TEEL WALL COVERING WITH WARMING SHELVES . O PTIONAL ) E64000 SERIES HOOD - E64000 SERIES RANGE HOOD SYSTEM - IN-LINE AND EXTERIOR BLOWERS 332KR IN - LINE AND E XTERIOR B LOWER R OUGH - IN K IT ( SUPPLIED WITH HOOD ) M ODEL 418 10” R OUND A DJUSTABLE ...

Page 5 - SELECT BLOWER OPTION AND INSTALLATION TYPE

- 5 - 1. SELECT BLOWER OPTION AND INSTALLATION TYPE 1.2 D UCTED I NSTALLATION The Broan Elite E64000 Series range hood includes many configurations: hood with single or double internal blowers (included with the hood), or hood using external blowers. For hood using external blowers, the Broan Elite ...

Page 6 - PREPARE THE INSTALLATION; CAUTION

- 6 - 2. PREPARE THE INSTALLATION Make sure that the following items are included: - Range hood - Accessories: • Baffle filters • Baffle filters handles (located inside the hood) • 3¼” x 10” adapter/damper (located inside internal single blower hood) • 4½” x 18½” adapter (screwed inside internal dou...

Page 8 - REMOVE FILTERS AND GREASE DRIP RAIL; REMOVE THE ADAPTER

- 8 - 4. REMOVE FILTERS AND GREASE DRIP RAIL A. Remove tape on filters.Remove filters from hood and set aside. NOTE: It is recommended to start with the center one(s). B. Remove tape on grease drip rail ( 1 ). Lift out grease drip rail and set aside. HD0240 1 5. REMOVE THE ADAPTER (INTERNAL BLOWER H...

Page 10 - INSTALL ANKE60 RECIRCULATION KIT

- 10 - 7. HORIZONTAL DISCHARGE INSTALLATION ( INTERNAL BLOWER(S) ONLY) HD0271 Flip the blower and engage itsflange in the back wall retainingbracket.Using a 5/16” socket and thescrews previously removed, securethe blower to the hood. HD0272 8. INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE) (INT...

Page 11 - WARNING; Do not plug the two cords together.; INSTALL THE BLOWER

- 11 - 10. INSTALL THE HOOD (ALL BLOWERS) HD0265 A B A B B INTERNAL BLOWER: Run power cable to installation location. Place the hood in its location. Mark the position of the screws(smaller part of the key holes [ A ]) with a pen. Remove the hood and install the (4) 1/2” double thread screws at mark...

Page 12 - INSTALL LIGHT BULBS; REINSTALL GREASE DRIP RAIL AND FILTERS

- 12 - 13. INSTALL LIGHT BULBS This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (not included). WARNING In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures. ! WARNING In order to preven...

Page 13 - HEAT SENTRYTM

- 13 - 15. USE AND CARE Baffle Filters The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates greatergrease—like frying foods or wok cooking. Remove baffle filters by pushing them towards the back of hood and rotating filters d...

Page 14 - BLOWER; WARRANTY

- 14 - 16. OPERATION (CONT’D) HC00 3 5 1) Halogen light knob2) Blower operation indicator3) ON/OFF blower switch4) Blower speed control knob 2 3 1 4 HC00 3 4 A) Halogen light knobB) Blower speed control knob A B COOKTOP LIGHTING (HALOGEN) A rotary 3-position knob ( 1 ) controls the halogen lights (O...