BOXLIGHT MP-93i - Manuals

BOXLIGHT MP-93i – Manual in PDF format online.

Manuals:

Manual

Manual BOXLIGHT MP-93i

Summary

Page 2 - FOR THE CUSTOMERS IN U.K; IMPORTANT FOR UNITED KINGDOM; WARNING: THIS EQUIPMENT MUST BE EARTHED

As these colours may not correspond with the coloured makings identifying the terminals in your plug, proceed as follows: The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Green and ...

Page 3 - ENGLISH; Before use; Instructions to Users:

3 ENGLISH Before use Examples of illustrated marks (Before Use) Illustrated marks Various illustrated marks are used in this product and instruction manual so the product is used correctly and safely, and also to protect you and others from danger and your property from being damaged. This shows tha...

Page 4 - Warning

Warning 4 If any abnormality occurs. • When there is an abnormal smell or smoke, if you use this unit as it is, this could cause a fire or electric shock, etc. When an abnormality is found, immediately turn off the power switch and pull out the power plug from the power outlet. Check that there is n...

Page 6 - Caution

6 Do not place this unit where it gets hot. Be careful since if you place the unitoutdoors, in a place exposed to directsunlight or near a heating device,the cabinet and parts could beaffected. Cleaning the lens. To clean the lens, use a generally-available lens cleaning tissue (usedfor cleaning len...

Page 7 - Main unit; Contents of shipping box; Names and functions of each part

7 ENGLISH Main unit Lens Speaker Speaker Remote controlsensor • Use the remote control transmitter within the rangeof about 16 feet from the remote control sensor andwithin 30 ° to both the left and right. Cooling fan (exhaust) Contents of shipping box Handle STANDBY / ON button Power ON/OFF button....

Page 8 - Names and functions of each part (continued)

8 Names and functions of each part (continued) RGB input terminal D-sub 15pin shrink terminal (1/2) VIDEO input terminal (on video-equipped models only) S-VIDEO input terminal Mini DIN 4pin connector VIDEO input terminal RCA Jack AUDIO L/R input terminal RCA Jack AC IN socket Connect the provided po...

Page 9 - Remote control transmitter

MUTE button Silences the sound. (Cancels the mute whenthe unit is set in mute mode.) VOLUME button Adjusts volume. The sound is loud or lowwhile pressing the "+" or "-" button. LASER button Laser pointer ON button. Use as a stick (forindication). (See page 10) MOUSE LEFT button M o u...

Page 10 - How to insert batteries; CAUTION; Cautions on use of the laser pointer.

Slide the battery compartment coverin the direction of the arrow whilepressing slightly down on it. 10 Caution Cautions on use of batteries • Do not use batteries not specified for this unit.Also do not use old and new batteries together.It may cause a fire, injury due to burst ofbattery or liquid l...

Page 11 - Installation; Example of the projector and screen installation

Please basically use liquid crystal projector at the horizontalposition. If you use liquid crystal projector by the lens up position, the lensdown position and the side up position, this may cause the heatinside to build up and become the cause of damage.Be especially careful not to install it with ...

Page 12 - Power on all connected equipment.; Adjust picture size using the projection lens ZOOM knob.; Basic operations; To project the picture

12 7 Press the INPUT button or the INPUT SELECT (VIDEO orRGB) button to select the source of the signal to be projectedon the screen. • The selected signal input is displayed at the bottom right of the screen for 3 seconds. Power on all connected equipment. The method of connecting various equipment...

Page 13 - Install the lens cap.; To turn off the power

13 ENGLISH Basic operations (continued) • To reduce temperature inside the projector, fan will rotate for about 1 minute after the lampis turned off. • Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged. Press the STANDBY/ON button, for 1 second. • The ON indicator ...

Page 14 - MAGNIFYING FUNCTION; Press the POSITION ON button.; FREEZE FUNCTION; Press the FREEZE button.

14 Basic operations (continued) MAGNIFYING FUNCTION It is possible to display a partially magnified picture. This function can be used in combination with aFREEZE function. [TO CHANGE MAGNIFICATION] 3 Press the MAGNIFY + button. • By doing so, the center of the picture can be magnified as onepart, b...

Page 15 - Select the menu to be adjusted using the MENU (; Adjustments and functions; Memory function

15 ENGLISH Press the MENU ( ) buttons or the MENU ON / OFF button. • On-screen menus are displayed on the screen. 1 Select the menu to be adjusted using the MENU ( ) buttons or DISK PAD. • Menu displayed in green is selected. 2 Select the item to be adjusted using the MENU ( ) buttons or DISK PAD. •...

Page 16 - SET UP; How to use the SET UP menu

16 RGB signal input VIDEO signal input The menu SET UP serves for the change of parameters influencing the picture and forthe move picture position. Adjustments and functions (continued) SET UP S E T U P I N P U T I M A G E O P T . VOLUMEBRIGHTCONTRASTV POSITH POSITH PHASEH SIZECOLOR BAL 123111 31 1...

Page 17 - INPUT

17 ENGLISH Adjustments and functions (continued) The menu INPUT serves for the selection of input source. INPUT S E T U P I N P U T I M A G E O P T . RGB1RGB2VIDEO S E T U P I N P U T I M A G E O P T . RGB1RGB2V I DEO S Y S T E M AUTONTSCPALSECAMNTSC4.43M-PALN-PAL Adjustment Item Details of adjustme...

Page 18 - IMAGE

18 The menu OPT. allows you to control communication function etc. Adjustments and functions (continued) S E T U P I N P U T I M A G E O P T . COM. SPEEDCOM. BITSTIMERLANGUAGEAUTO OFFSTART UP S E T U P I N P U T I M A G E O P T . 7N1 8N1 COM. BITS S E T U P I N P U T I M A G E O P T . 12002400480096...

Page 19 - Connection to the RGB signal terminal; Signal input terminal

19 ENGLISH 1. Input / output signal Connection to the RGB signal terminal 2. Signal input / output terminal 5 1 10 6 15 11 D-sub 15pin shrink terminal(Female) 1. Input signal Connection to the video signal terminals 2. Signal input terminal Ground Luminance signal S VIDEO input (Mini DIN4 pin) Groun...

Page 20 - Example of computer signal; Connection to the RGB signal terminal(continued)

20 3. Example of computer signal Note 1: Signal mode Note 2: MAC adapter is necessary to the resolution mode. Projector is compatible with 13 inch mode and 16 inch mode.MAC13"mode=switch 1 and switch 2 are ON.MAC16"mode=switch 2 and switch 4 are ON. Note 3:Display mode Connection to the RGB ...

Page 22 - Control signal terminal; Connection to the control signal terminal

22 1. Control signal terminal Connection to the control signal terminal 2. Mouse emulation 5 1 10 6 15 11 D-sub 15pin shrink terminal (Male) Caution Turn off the power of both the projector and computer before connecting. Connect the computer to the control terminal of the projector using an appropr...

Page 23 - Connection to the control signal terminal (continued)

23 ENGLISH Connection to the control signal terminal (continued) PS/2 mouse ADB (Mac) mouse 2 1 4 3 6 5 2 1 4 3 6 5 8 7 10 9 12 11 14 13 15 CLK DATA SEL0 RTS GND +5V DATA GND +5V CLK 2 1 4 3 6 5 2 1 4 3 8 7 10 9 12 11 14 13 15 RTS GND +5V ADB GND +5V (POWER ON) DATA 2 1 4 3 6 5 2 1 4 3 Projector Com...

Page 25 - Control data table

25 ENGLISH Connection to the control signal terminal (continued) Control data table Caution If computer sends the undefined command code or data code, Projector can not guarantee operation. Command is consisted of 2 command bytes and following data bytes.1-st byte indicates the kinds of commands and...

Page 27 - Example of system setup; Connecting various equipment.

27 ENGLISH S-VIDEO IN RGB IN CONTROL AUDIO OUT AUDIO IN 1 2 RGB OUT 1 2 VIDEO IN AUDIO IN L R MONO Example of system setup Connecting various equipment. AC Inlet Computer(Desk type) Computer (Note type) VTR with S-VHS out (video model only) VTR, etc. (video model only) CRT Display Audio amplifying e...

Page 28 - Cleaning the air filter; Remove the front filter cover.

28 Clean the air filter about every 100 hours. Cleaning the air filter Turn the main power switch off and disconnect the powerplug from the power outlet. 1 Remove the front filter cover. 2 Clean the air filter using a vacuum cleaner. • When air filter is very dirty, wash it using neutral detergent d...

Page 29 - Lamp; How to replace lamp; Remove the lamp cover.

29 ENGLISH Lamp Light source lamp has a service life.The picture will become dark or color will be poor when the lamp is used for a long time.If usage of lamp is continued in such cases, it could cause a malfunction. Replace lamp with new one.As reference for replacement time, indicator will operate...

Page 30 - Message table; Install the lamp cover and fix it using screws.; Reset the lamp time

30 On-screen display The following messages are displayed on the screen. Message table *1 This message are not displayed after 3 minutes. But this message are displayed when you turn on the power again. *2 It is possible to again turn on the power, however the power will go off after about 10 minute...

Page 31 - When you think something wrong; Indicator display

31 ENGLISH Check the following again before asking for service. If the trouble cannot be recovered, consult your dealer. When you think something wrong A bright dot may be seen in the picture. This is a phenomenon peculiar to the liquid crystal and is not a problem. Message table (continued) The ON ...

Page 32 - Specifications; Dimension diagram

32 Specifications All dimensions shown in inches. • All specifications are subject to change without notice. Dimension diagram 1.1 10.1 9.8 2.2 13.0 13.2 3.9 4.2 0.5 Product name Liquid crystal projector Model name MP-93i Display system 3 sheets of liquid crystal panels, 3 primary color lights shutt...