Page 2 - INFORMATION TO THE USER; TO THE OWNER
2 INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial en...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them for lateruse. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcl...
Page 4 - TABLE OF CONTENTS
4 TABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation....
Page 5 - FEATURES AND DESIGN
5 FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease ofuse. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystaldisplay (LCD) technology. ◆ Compatibility This p...
Page 6 - PREPARATION; NAME OF EACH PART OF THE PROJECTOR; BOTTOM OF THE CABINET
6 PREPARATION NAME OF EACH PART OF THE PROJECTOR These Air Intake Ventsshould not be blocked. BOTTOM OF THE CABINET BACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot.When using or installing the projector, thefollowing attention should be taken. ● Do not put...
Page 7 - ROOM LIGHT; SETTING-UP THE PROJECTOR
7 PREPARATION POSITIONING THE PROJECTOR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m). ● Refer to the figure below to adjust the screen size. H1 H2 300” 231” 200” 154” 150” 115” 100” 77” 40” 35.4’ (10.8m) 24.0’ (7....
Page 8 - VENTILATION; CAUTION; CONNECTING THE AC POWER CORD
8 PREPARATION ● Do not cover the vent slot. ● Keep the rear grill at least 1m (3 feet) away from anyobject. ● Keep sides clear of any obstructions. Obstructionsmay block cooling air. This projector is equipped with cooling fans for protection from overheating. Pay attention to the following toensure...
Page 9 - CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR
9 PREPARATION MOVING THE PROJECTOR Use the Carry Handle when moving the Projector.When moving the projector, replace the Lens Cover andretract the Adjustable Feet to prevent damage to the lens andcabinet. When this projector is not in use for an extended period,replace the Lens Cover, retract the Ad...
Page 10 - CONNECTING THE PROJECTOR; TERMINALS OF THE PROJECTOR
10 CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR S-VIDEO R-AUDIO-L (MONO) VIDEO AUDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output tothis terminal. (Refer to P12, 13.) When controlling the computerwith the Remote Control of thisprojector, connect the mouseport of you...
Page 11 - CONNECTING TO THE VIDEO EQUIPMENT
S-VIDEO R-AUDIO-L (MONO) VIDEO AUDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT 11 CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker(stereo) External Audio Equ...
Page 12 - CONNECTING TO THE COMPUTER
12 CONNECTING THE PROJECTOR ON 1 2 3 4 5 6 DIP CONNECTING TO THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier ...
Page 14 - BEFORE OPERATION; OPERATION OF THE REMOTE CONTROL; LASER POINTER FUNCTION
14 BEFORE OPERATION OPERATION OF THE REMOTE CONTROL VOLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYSTONE NO SHOW FREEZE AUTO IMAGE NORMAL PAGE Used to select source eitherCOMPUTER or MCI mode.(P23, 33) U s e d t o s e l e c t V I D E Osource. (P30) U s e d t o e x e c u t e t...
Page 15 - REMOTE CONTROL BATTERIES INSTALLATION; Operating Range
15 BEFORE OPERATION VOLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYSTONE NO SHOW FREEZE AUTO IMAGE NORMAL PAGE To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do...
Page 16 - TOP CONTROLS AND INDICATORS
16 BEFORE OPERATION TOP CONTROLS AND INDICATORS NORMAL PAGE VOLUME MENU MODE SELECT ZOOM FOCUS ON–OFF LAMP READY WARNING TEMP. LAMP REPLACE AUTO IMAGE Used to open or close theMENU operation. (P17, 19) MENU BUTTON AUTO IMAGE BUTTON READY INDICATOR POWER ON–OFF BUTTON WARNING TEMP. INDICATOR LAMP IND...
Page 17 - OPERATING ON-SCREEN MENU
SELECT 17 BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU FLOW OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU(MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. Thedialog box of the ITEM appears. Move the POINTER (red frame) t...
Page 20 - BASIC OPERATIONS; TURNING ON THE PROJECTOR; TURNING ON / OFF THE PROJECTOR
20 BASIC OPERATIONS TURNING ON THE PROJECTOR Connect the projector's AC power cord into a wall outlet. TheLAMP indicator lights RED, and the READY indicator lightsGREEN. Press the power ON-OFF button on the Remote Control Unit oron the Top Control to ON. The LAMP POWER indicator dims,and the Cooling...
Page 21 - BASIC OPERATION; ADJUSTING THE IMAGE; ZOOM ADJUSTMENT
21 BASIC OPERATION ADJUSTING THE IMAGE The message disappears after 4 seconds. The message disappears after 4 seconds. ZOOM ADJUSTMENT 1 Press the ZOOM button on the Top Control or the ZOOM ▲ / ▼ button on the Remote Control Unit to turn into the ZOOMmode. 2 Press the POINT UP button or the ZOOM ▲ b...
Page 22 - SOUND ADJUSTMENT; NO SHOW FUNCTION
22 BASIC OPERATION Press the VOLUME (+/–) button(s) on the Top Control or on theRemote Control Unit to adjust the volume. The Volume dialog boxappears on the screen for a few seconds.The VOLUME (+) button increases the volume, and The VOLUME(–) button decreases the volume. Press the MUTE button on t...
Page 23 - COMPUTER MODE; SELECTING COMPUTER MODE; DIRECT OPERATION; SELECTING COMPUTER SYSTEM; AUTOMATIC MULTISCANNING SYSTEM; SELECT COMPUTER SYSTEM MANUALLY
COMPUTER / MCI button 23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE DIRECT OPERATION Select COMPUTER mode by pressing the MODE button on the TopControl or the COMPU...
Page 24 - PC ADJUSTMENT
24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed.However, some computers employ the special signal formats which are different from the standard ones andmay not be tuned by Multiscanning of this projector. ...
Page 27 - PICTURE IMAGE ADJUSTMENT; ADJUST PICTURE IMAGE MANUALLY; NORMAL FUNCTION
27 COMPUTER MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectIMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon willappear....
Page 28 - PICTURE POSITION ADJUSTMENT
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Finesync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectAUTO IMAGE and press the SELECT button. Another dialog box...
Page 29 - PICTURE SCREEN ADJUSTMENT
29 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSCREEN and press the SELECT button. Another dial...
Page 30 - VIDEO MODE; SELECTING VIDEO MODE; SELECTING COLOR SYSTEM
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the TopControl or the VIDEO button on the Remote Control Unit...
Page 31 - ADJUSTING THE PICTURE IMAGE
31 Each of the keys operates as follow. VIDEO MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectIMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN butto...
Page 32 - MCI MODE; OPERATING THE PC CARD SLOT; M C I; HOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR
32 MCI MODE OPERATING THE PC CARD SLOT This projector has a PC CARD SLOT and the data in a memory card (SmartMedia with PC Card Adapter or PCcard) can be displayed just by inserting the card into it. It is unnecessary to connect with other input equipment.Media Card Imager (supplied with CD-ROM) can...
Page 33 - SELECTING MCI MODE; Media Card Imager
33 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button. SELECTING MCI MODE DIRECT OPERATION Select MCI mode by pressing the MODE button on the Top Controlor the COMPUTER / MCI button on the Remote Control Unit. MENU O...
Page 34 - SHOW THE DATA IN THE MEMORY CARD
34 MCI MODE INDEX SELECTION PAGE SELECTION Move the arrow toeach operation andpress the SELECTbutton. 1 2 Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to select VIEWand press the SELECT button. Another dialog box VIEWSETTING menu will appear. Press the ...
Page 35 - WRITE DATA INTO THE MEMORY CARD; ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR
35 MCI MODE WRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR If your computer doesn't have the PC card writing equipment, the data can be written or read by connectingwith this projector.NOTE : This operation can be made only by Media Card Imager in the Personal Comput...
Page 36 - ADJUST THE PICTURE IMAGE MANUALLY
T h e p o s i t i o n o f t h e i m a g e c a n b e a d j u s t e d v e r t i c a l l y a n d h o r i z o n t a l l y t h r o u g h P I C T U R E P O S I T I O NADJUSTMENT. 36 MCI MODE PICTURE IMAGE ADJUSTMENT ADJUST THE PICTURE IMAGE MANUALLY The normal picture level is preset on this projector at ...
Page 38 - SMARTMEDIA AND PC CARD ADAPTER; INSTALL / REMOVE THE SMARTMEDIA; IMPORTANT NOTE
38 MCI MODE SMARTMEDIA AND PC CARD ADAPTER SmartMedia and PC Card Adapter are provided with this LCD projector. SmartMedia can be used as a PC cardconforming to the PC Card Standard-ATA by combining with PC Card Adapter. INSTALL / REMOVE THE SMARTMEDIA INSTALL Insert SmartMedia fully into PC Card Ad...
Page 39 - PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER
39 MCI MODE ● SmartMedia is a precision device. Do not bend it, drop it, subject itto strong forces or shocks or place where a strong static electricalcharge can be generated. ● Do not touch the surface of the Contact Area with fingers or allow itto be stained with foreign materials. Store SmartMedi...
Page 40 - SETTING; SETTING MENU
40 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the item that ...
Page 41 - APPENDIX; OPERATING WIRELESS MOUSE; INSTALLATION
41 APPENDIX OPERATING WIRELESS MOUSE INSTALLATION The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wirelessmouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wirelessmouse operation.The wireless mouse is...
Page 42 - MAINTENANCE; TEMPERATURE WARNING INDICATOR
42 APPENDIX CLEANING THE PROJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 L...
Page 43 - ORDER REPLACEMENT LAMP
43 APPENDIX LAMP REPLACEMENT INDICATOR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights red.When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp isrequired. Turn off the projector and disconnect the AC plug...
Page 44 - TROUBLESHOOTING; Try these Solution
44 APPENDIX TROUBLESHOOTING Before calling BOXLIGHT or your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable c...
Page 46 - TECHNICAL SPECIFICATIONS
46 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICATIONS Multi-media Projector 8.82 lbs (4.0 kg) 9.41" x 3.54" x 12.72" (239mm x 90mm x 323mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync...
Page 47 - OPTIONAL PARTS
47 OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give thename and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MCSRL ● Control Cable for ADB Port Type No. : POA-MCMAC ● MAC Adapter Type No. : POA-MACAP
Page 48 - BOXLIGHT
LIMITED WARRANTY BOXLIGHT CORPORATION (“BOXLIGHT”) warrants that each Boxlight CP-33t (“the Product”) sold hereunder willconform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall applyonly to the first person or entity that purchases the Product f...
