BOXLIGHT DLP - Manuals - manualsarea.com

Page 2 - Safety; Safety Definitions

DLP ™ Digital Projector User’s Guide 2 Safety These safety precautions include information to prevent personal injury and damage to the projector. Safety Definitions WARNING: Statements identify conditions or practices that could result in personal injury. CAUTION: Statements identify conditions or ...

Page 3 - Lamp Safety; Battery Safety

Lamp Safety WARNING: • To replace the lamp, turn off the power and unplug the power cord. To avoid burns, wait 45 minutes before opening the lamp door. Follow all instructions provided in this User’s Guide . See “Changing the Lamp Module” on page 34. • When you open the lamp module door, be careful ...

Page 4 - FCC Warning

DLP ™ Digital Projector User’s Guide 4 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is oper...

Page 5 - ENG; Table of Contents

DLP ™ Digital Projector User’s Guide 5 ENG L ISH Table of Contents Safety .......................................................................................................... 2 Safety Definitions......................................................................................................

Page 7 - Preface

DLP ™ Digital Projector Quick Start Guide 7 ENG L ISH Preface Congratulations on purchasing a DLP™ (Digital Light Processing) projector. The micro portable projector uses the Digital Light Processing (DLP™) technology along with a built-in image manager. DLP ™ technology by Texas Instruments offers ...

Page 8 - Power Cord

DLP ™ Digital Projector User’s Guide 8 Accessories Overview Power Cord There are four different power cords for options, US type, UK type, Euro type and China type. The appropriate Power Cord is included according to your geograhical location & safety requirement. If the standard kit does not sa...

Page 9 - Front View

DLP ™ Digital Projector User’s Guide 9 ENG L ISH Product Profile Front View Rear View Bottom Panel NOTE: • With ceiling installations, use approved mounting hardware & M4 screw. Min. distance from ceiling/rear wall: 30/50 cm, 12/20 inch for proper ventilation. For permanent installations, follow...

Page 10 - LED Indicator & Control Pad on Projector; LED Indicators Message; Status; Control Pad Function; Description

DLP ™ Digital Projector User’s Guide 10 LED Indicator & Control Pad on Projector LED Indicators Message Status Power LED Indicator Green Color Lamp Ready LED Indicator Orange Color Plug in Power Cord Steady light Steady light Power on without source Blinking light Light off Power on with active ...

Page 11 - Remote Control Instruction

DLP ™ Digital Projector User’s Guide 11 ENG L ISH Remote Control Instruction WARNING: To reduce the risk of injury to the eyes, do not look directly into the laser light emitted from the aperture on the Remote Control and do not point the laser light into anyone’s eyes. This remote control is equipp...

Page 13 - Installation Steps; Getting Started; Connecting the Projector

DLP ™ Digital Projector User’s Guide 13 ENG L ISH Installation Steps Getting Started 1. Place the projector on a flat surface. 2. Position the projector at the desired distance from the screen. 3. The projection distance is less than 33 feet (10M). CAUTION: • Proper ventilation is import. Don’t bloc...

Page 14 - Connecting Input and Output Devices

DLP ™ Digital Projector User’s Guide 14 Connecting Input and Output Devices The cables are color coded to assist you in making the connections. You can connect more than one image source at a time. The input source will be detected automatically when enable the “Auto Source” function is enabled in t...

Page 15 - Starting the Presentation; Power on

DLP ™ Digital Projector User’s Guide 15 ENG L ISH Starting the Presentation Power on 1. Remove the lens cap 2. Make sure Lamp LED steady orange state. 3. Press Power on the remote control, or Power on the control pad, to turn on the unit. NOTE: • When powered on, both the fans & lamp will be tur...

Page 16 - Adjustment; Adjusting Projector Angle

DLP ™ Digital Projector User’s Guide 16 Adjustment Adjusting Projector Angle Place the projector on a flat surface to position it in centre horizontally for best viewing. Adjust the projector angle using the Height Adjustment Buttons. Press the Height Adjustment buttons while tilting the projector. ...

Page 17 - Make any necessary image adjustments by using the on-screen menus.

DLP ™ Digital Projector User’s Guide 17 ENG L ISH Adjusting the Keystone Control To adjust image vertically and make a square image. Adjust the keystone function by pressing the keystone button on the remote control or through OSD menus. Adjusting the Zoom and Pan Press the zoom +/- buttons on remot...

Page 18 - Power Off; Turn off the projector and image sources in the order listed here.; Restart

DLP ™ Digital Projector User’s Guide 18 Power Off 1. Turn off the projector and image sources in the order listed here. a. Computer b. Projector c. Audio Source (if different from your video source or computer). d. Video source (such as VCR, DVD, HDTV). 2. Press the Power button on the top of the un...

Page 19 - On-Screen-Display Menu Format and Description; Input Source OSD; Display Logo; Input Source

DLP ™ Digital Projector User’s Guide 19 ENG L ISH On-Screen-Display Menu Format and Description The OSD menu will appear if any button is pressed thru using the control pad and remote control. Input Source OSD Display Logo The projection image will appear in full brightness within 10-15 seconds and ...

Page 20 - Ezkey OSD

DLP ™ Digital Projector User’s Guide 20 Ezkey OSD By repeatedly pressing EZKEY the following menu can be scrolled though. The user may adjust it to the desired level through keypads of Auto (-) and Source (+). Keystone Correction Use the (-) and (+) to adjust the vertical keystone level of the image...

Page 21 - OSD Menu; Main Menu

DLP ™ Digital Projector User’s Guide 21 ENG L ISH OSD Menu Use the On-Screen-Display Menus shown below to adjust the projected image. To access and adjust the On-Screen-Menu do the following: 1. Press the Menu button on the remote control to select one of six on-screen menus: Main Menu, Setup Menu, ...

Page 22 - Setup Menu

DLP ™ Digital Projector User’s Guide 22 Setup Menu PC Mode Video Mode Frequency Use arrow keys Left / Right ( W / X ) to adjust the sampling clock to eliminate flicker. Adjustment range: from low-high (0-100) by 31 steps. (Default value: auto detected) Tracking Use arrow keys Left / Right ( W / X ) ...

Page 24 - Language Menu

DLP ™ Digital Projector User’s Guide 24 Language Menu Utilities Menu PC Mode Video Mode PIP Size Use arrow keys Left / Right ( W / X ) to select different picture in picture size. Selection items: off/small/medium/large by 4 steps. (Default value: off) PIP Position Use arrow keys Left / Right ( W / ...

Page 25 - Auto Power Off

DLP ™ Digital Projector User’s Guide 25 ENG L ISH Status Menu Auto Source To turn on or off the automatic function to detect one or more active input source. Auto Power Off To turn on or off the function for automatically lamp off when there is no active signal. Video Information To show resolution,...

Page 26 - Reference; Positioning the Projector; Figure 1: Projection Distance vs. Image Size

DLP ™ Digital Projector User’s Guide 26 Reference Positioning the Projector To adjust the size of the projected image, refer to figures 1 below and table 1 on the next page for Projection Distances to increase/decrease the distance between the projector and the projection screen. Figure 1: Projectio...

Page 27 - feet; Table 1: Projection Distances vs. Image Size

DLP ™ Digital Projector User’s Guide 27 ENG L ISH Distance Width x Height Diagonal 5 feet 31.12x23.34" - 37.34x28.01" 38.90 - 46.68" (1.5m) (0.78x0.59 - 0.94x0.70m) (0.98 -1.17 m) 6.5 feet 41.49x31.12" - 49.79x37.34" 51.87 - 62.24" (2m) (1.04x0.78 - 1.25x0.94m) (1.31 - 1.57m)...

Page 28 - Remote Control Transmission Range

DLP ™ Digital Projector User’s Guide 28 Remote Control Transmission Range The Remote Control shall function at a distance within the range that the IR Transceiver can receive. For best operation, kindly refer to the following illustration of the Remote Control and IR transceiver transmission range a...

Page 29 - Product Specification

DLP ™ Digital Projector User’s Guide 29 ENG L ISH Product Specification Display Type DLP ™ Projection System Panel 0.7" DMD x 1 Native Resolution XGA (1024 X 768 ) Native Data Compatibility VGA, SVGA, XGA, SXGA, Macintosh Maximum Brightness 1500 ANSI Lumens Contrast Ratio 1000:1 Zoom Ratio 1: 1....

Page 30 - Timing Charts

DLP ™ Digital Projector User’s Guide 30 Timing Charts The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Table 2: ANALOG Computer Timings (Resolution and Refresh Rate 【 fV 】 ) Resolution FH(kHz) FV (Hz) Signal mode 640 ...

Page 31 - Troubleshooting; Power Indicator

DLP ™ Digital Projector User’s Guide 31 ENG L ISH Troubleshooting Power Indicator The power and lamp indicator on the control pad provides you with information about the condition of the projector. Indicator Light Status Condition Lamp Ready LED Blinking • Lamp is off but power cord is connected to ...

Page 32 - Image Source; Image Quality; Symptom

DLP ™ Digital Projector User’s Guide 32 Image Source Symptom Cause and Solution The S-Video image source does not appear. Only the start-up screen appears and not the image from the image source. The image source is connected but a “No Signal Message” appears. • Be sure to use the cable that comes w...

Page 34 - Maintenance; Changing the Lamp; To replace the lamp module

DLP ™ Digital Projector User’s Guide 34 Maintenance Changing the Lamp Important! The lamp contains a trace amount of mercury. Some governments require special disposal of lamps containing mercury. Dispose of lamps in accordance with the law and any applicable local regulations. The lamp module shoul...

Page 35 - Lamp Hour Reset; Changing the Battery of Remote Control

DLP ™ Digital Projector User’s Guide 35 ENG L ISH NOTE: 1. The lamp contains a trace amount of mercury. Some governments required special disposal of lamps containing mercury. Dispose of lamps in accordance with the law and any applicable local regulations. 2. Do not loosen or remove any screw other...

Page 36 - Cleaning; Cleaning the Projection Lens; Cleaning Exterior Case; Cleaning the Projector

DLP ™ Digital Projector User’s Guide 36 Cleaning Cleaning the Projection Lens 1. Be sure the projector is powered-off and has cooled down. 2. Unplug the projector. 3. Remove the lens cap. 4. Apply a non-abrasive camera lens cleaner to a soft, dry cloth. 5. Lightly wipe the cleaning cloth over the le...

Page 37 - Customer Support; For Your Records; Product disposal at end of product life

DLP ™ Digital Projector User’s Guide 37 ENG L ISH Customer Support For most of your questions, it is suggested that you contact your dealer for assistance or ask your dealer to refer you to a service center. To facilitate after-sales service process, it is suggested that you fill in following inform...