Bose T1 - Manuals - manualsarea.com

Page 2 - UICK; To get sound right away; ON

ii English Deutsch Español Français Italiano Nederlands Svenska Dansk Q UICK P ATH T O M AKING M USIC To get sound right away 1. Remove your new T1 ToneMatch TM audio engine from the carrying bag and remove its protective cover (page 6). 2. Refer to the Quick Setup Guide and connect your T1 to your ...

Page 3 - To shape your sound; ToneMatch; Scenes

iii Svenska Italiano Français Español Deutsch Dansk English Nederlands To shape your sound 1. ToneMatch TM engine: Select a preset designed for your specific instrument or microphone (see “Selecting a Tone-Match™ preset” on page 20). 2. zEQ: Adjust the low/mid/high-frequency bands specific to the se...

Page 4 - AFETY; Please read this owner’s guide; • The T1 power supply and the T1 ToneMatch; • The product label is located on the bottom of the product.; model II power stand or a T1 ToneMatch audio engine

iv English Deutsch Español Français Italiano Nederlands Svenska Dansk S AFETY I NFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please ...

Page 5 - Important Safety Instructions

Important Safety Instructions v English Deutsch Español Français Italiano Nederlands Svenska Dansk 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ve...

Page 7 - NTRODUCTION; Connecting the T1 to an L1; PERATING; Selecting a ToneMatch

vii Svenska Italiano Français Español Deutsch Dansk English Nederlands I NTRODUCTION 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product overview . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 8 - ACTORY

viii English Deutsch Español Français Italiano Nederlands Svenska Dansk Using global functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Selecting a type of reverb . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 9 - Welcome; Features and benefits; For more information

1 English Deutsch Español Français Italiano Nederlands Svenska Dansk I NTRODUCTION Welcome Thank you for purchasing the Bose ® T1 ToneMatch™ audio engine. The T1 ToneMatch™ audio engine provides the ultimate control for performing musicians. When used with the Bose L1™ model II or model I system, th...

Page 10 - Product overview; Figure 1; T1 ToneMatch; audio engine

I NTRODUCTION 2 English Deutsch Español Français Italiano Nederlands Svenska Dansk Product overview The T1 ToneMatch TM audio engine can be used with a Bose ® L1 TM model II or model I system. For convenient access, you can mount the T1 on a Cylindrical Radiator ® loudspeaker or on a microphone stan...

Page 11 - Controls and indicators; Figure 2; Top panel; Phantom power switch

3 I NTRODUCTION Svenska Italiano Français Español Deutsch Dansk English Nederlands Controls and indicators The control panel provides all the necessary controls and indicators for operation. Figure 2 Top panel 1. Input signal/clip LEDs (1-4/5) – Displays the input signal status in color: Green indic...

Page 12 - Connection panel; Figure 3

I NTRODUCTION 4 English Deutsch Español Français Italiano Nederlands Svenska Dansk Connection panel The rear panel provides all input/output connections. Figure 3 T1 connector panel 1. IN – Analog input channels 1-3. Accepts XLR balanced cables for microphones, or ¼" TRS balanced or TS unbalance...

Page 13 - Unpacking; Figure 4; Serial numbers and product registration; Now is a good time to record the serial number of your T1 ToneMatch; audio engine here and on your product

5 English Deutsch Español Français Italiano Nederlands Svenska Dansk S YSTEM S ETUP Unpacking The items packed in the carton are shown in Figure 4. Carefully unpack the carton and check that you have all the items shown here. Keep all packing materials for possible future use. WARNING: To avoid dang...

Page 14 - Removing/attaching the cover; The T1 ToneMatch; Lift up on the front edge of the cover to remove it.

S YSTEM S ETUP 6 English Deutsch Español Français Italiano Nederlands Svenska Dansk Removing/attaching the cover The T1 ToneMatch TM audio engine comes out of the carton with a cover installed on the top panel. The cover is designed to protect the control panel while transporting or storing the audi...

Page 15 - Mounting options; Mounting the T1 on a Cylindrical Radiator; Figure 6; Latch

7 S YSTEM S ETUP Svenska Italiano Français Español Deutsch Dansk English Nederlands Mounting options The T1 includes hardware for mounting it on a Cylindrical Radiator ® loudspeaker. The optional microphone stand mounting bracket allows you to mount the T1 on the shaft of most microphone stands. See...

Page 16 - The Cylindrical Radiator; Figure 7; The T1 can be mounted to the left or right.

S YSTEM S ETUP 8 English Deutsch Español Français Italiano Nederlands Svenska Dansk The Cylindrical Radiator ® top section needs to be removed for this installation . 1. Slide the carriage into the channel on the rear of the Cylindrical Radiator ® bottom section and turn the locking knob clockwise t...

Page 17 - Mounting the T1 on a microphone stand (optional); Figure 8; Removable insert

9 S YSTEM S ETUP Svenska Italiano Français Español Deutsch Dansk English Nederlands Mounting the T1 on a microphone stand (optional) The T1 ToneMatch TM audio engine microphone stand bracket allows you to mount the T1 on the shaft of most microphone stands. For installation help, refer to the Quick ...

Page 18 - To install the microphone stand bracket:; Microphone stand bracket

S YSTEM S ETUP 10 English Deutsch Español Français Italiano Nederlands Svenska Dansk To install the microphone stand bracket: 1. Determine the diameter of the shaft on your microphone stand. The cutouts on the edge of the Microphone Stand Bracket Quick Setup Guide can help you determine the diameter...

Page 19 - model II power stand; Power; port

11 S YSTEM S ETUP Svenska Italiano Français Español Deutsch Dansk English Nederlands Connecting the T1 to an L1 TM model II power stand 1. Make sure the power stand Power switch is OFF, the T1 power switch is OFF, and the T1 Master volume control is set to 0 . 2. Plug one end of the ToneMatch TM cab...

Page 20 - Connecting the T1 to an L1 model I power stand; To connect the T1 (as master volume control) to an L1 model I system:; Master

S YSTEM S ETUP 12 English Deutsch Español Français Italiano Nederlands Svenska Dansk Connecting the T1 to an L1 model I power stand On an L1 TM model I power stand, the Channel 1 and Channel 2 Mic/Line inputs have independent volume, equaliza- tion, and ToneMatch TM preset controls that can affect t...

Page 22 - Connecting the T1 ToneMatch; model I system or your; Plug one end of the AC power cord into the power supply.; Power supply cable

S YSTEM S ETUP 14 English Deutsch Español Français Italiano Nederlands Svenska Dansk Connecting the T1 ToneMatch TM audio engine power supply (optional) The T1 power supply provides power for the T1 audio engine when connecting it to an L1 TM model I system or your computer. 1. Plug the power supply...

Page 23 - Connecting the T1 to your computer; Plug the other end of the USB cable into a USB port on your computer.; Power switch

15 S YSTEM S ETUP Svenska Italiano Français Español Deutsch Dansk English Nederlands Connecting the T1 to your computer The T1 provides a USB port for connecting it to a computer. This allows you to download performance scenes to a computer or install system updates. Visit www.Bose.com/musicians for...

Page 24 - Optimizing input gain and output volume; the

16 English Deutsch Español Français Italiano Nederlands Svenska Dansk O PERATING I NSTRUCTIONS IMPORTANT! Optimizing input gain and output volume Getting a quality volume level from your system relies on the combined adjustments of input channel gain, master volume, and channel volume. Do the follow...

Page 25 - Using the Master volume control; Muting a channel

17 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Using the Master volume control The Master volume control adjusts the overall output level of the T1 ToneMatch TM output ( ) and analog Master output. During normal operation, it is recommended to keep the...

Page 26 - Reading the T1 display; Type; controls

O PERATING I NSTRUCTIONS 18 English Deutsch Español Français Italiano Nederlands Svenska Dansk Reading the T1 display The display provides you with an interface for operating the audio engine. Figure 14 shows you a sample of display information and the basic operating conventions. The content of the...

Page 27 - Using the T1 rotary selector; Global

19 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Using the T1 rotary selector The T1 rotary selector provides access to the functions that shape the sound of the ToneMatch TM audio engine out- put. Figure 15 provides a summary of the three global functio...

Page 28 - Editing the sound of a channel; All other CH Edit buttons are dimmed to indicate they are inactive.; Selecting a ToneMatchTM preset; Flat; Utility

O PERATING I NSTRUCTIONS 20 English Deutsch Español Français Italiano Nederlands Svenska Dansk Editing the sound of a channel The CH Edit functions allow access to settings that affect selected channels. The CH Edit functions are Aux, Tuner, ToneMatch the engine, zEQ, Para EQ, Comp/Gate, Mod, Delay,...

Page 29 - Adjusting zEQ; Adjusting Para EQ

21 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands 3. If you pressed Select , rotate the Preset button to access the list of presets and highlight your choice. 4. Press the Select button to select your choice, or press the Cancel button to exit the list wi...

Page 30 - Using compressor/gate functions; Rotate the; button to access the list of Comp/Gate effects and highlight; using a double bass drum pedal.; Type Thresh

O PERATING I NSTRUCTIONS 22 English Deutsch Español Français Italiano Nederlands Svenska Dansk Using compressor/gate functions The Comp/Gate function provides access to gate, compression, limiter, de-esser and kick drum presets with adjustable parameters. Note: To bypass the Comp/Gate settings, pres...

Page 31 - Using the KickGate

23 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands 2. Press the Select button to select your choice, or press the Cancel button to exit the list with no change. 3. For Comp1-3, Limiter, De-Ess: Rotate the Thresh button to adjust the input threshold (trigge...

Page 32 - Using modulation effects; The Mod function allows you to apply modulation effects.; button to access the list of modulator types and highlight your

O PERATING I NSTRUCTIONS 24 English Deutsch Español Français Italiano Nederlands Svenska Dansk Using modulation effects The Mod function allows you to apply modulation effects. Note: To bypass the Mod settings, press the Type button. Press it again to activate. 1. Rotate the Type button to access th...

Page 33 - Adding delays

25 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands 2. Press the Select button to select your choice, or press the Cancel button to exit the list with no change. 3. For Chorus1-3 and Flanger1-2: Rotate the Mix button to adjust the desired mix of dry signal ...

Page 34 - Adding reverb; Mix; Level

O PERATING I NSTRUCTIONS 26 English Deutsch Español Français Italiano Nederlands Svenska Dansk Adding reverb The Reverb function applies a user-adjustable amount of reverb to the selected chan-nel. To select the type of reverb, see “Selecting a type of reverb” on page 27. Note: To bypass the Reverb ...

Page 35 - Using the tuner; Using global functions; The; Select; Reverb Type; with the T1 rotary selector.; button to display the list of reverbs:

27 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Using the tuner An independent tuner is available on each input channel. The display indicates the note being played at the bottom of the screen. As you tune, a pitch indicator appears on the display, show...

Page 36 - Using the Prefs utilities

O PERATING I NSTRUCTIONS 28 English Deutsch Español Français Italiano Nederlands Svenska Dansk Large ............ Creates the ambience of a large-sized space. Features adjustable time and balance (ratio of early/later reflections) parameters. Works well with guitars, horns, percussion instruments, a...

Page 40 - Loading and saving scenes; is made and the currently loaded scene appears on the screen.

O PERATING I NSTRUCTIONS 32 English Deutsch Español Français Italiano Nederlands Svenska Dansk Loading and saving scenes A scene is a snapshot of the state of the T1 ToneMatch TM audio engine. • A scene remembers all ToneMatch audio engine settings, and the status of the Mute , FX Mute , and CH EDIT...

Page 41 - The display returns to the Scenes screen if you do not

33 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands To save a scene: 1. Select Scenes with the T1 rotary selector. The currently loaded scene is displayed. 2. Rotate the Save button to highlight the scene you wish to save. Press Select, or press Cancel to e...

Page 42 - Clear To End

O PERATING I NSTRUCTIONS 34 English Deutsch Español Français Italiano Nederlands Svenska Dansk To change the scene name before saving: You can use the following editing options to change the scene name. After changing the name, press the Save button and go to Step 4. • Select and change characters: ...

Page 43 - Sharing a scene

35 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands 4. When the question “Are you sure?” is displayed, press the Yes button to save the scene, or press the No button to exit without saving the scene. Sharing a scene If you create a scene that you would like...

Page 44 - occurs, and the currently loaded scene appears on the screen.

O PERATING I NSTRUCTIONS 36 English Deutsch Español Français Italiano Nederlands Svenska Dansk 4. If you pressed Select , use the Rename screen to edit the scene name (see “To change the scene name before saving” on page 34) or go to Step 5 if you want to use the existing name. 5. Press the Save but...

Page 45 - Bose scenes; Factory Settings; Chorus1

37 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Bose scenes The five Bose scenes are provided as examples for you to use as a starting point. After loading a Bose scene, you can modify the settings and then save the settings as a My Scene or Shared Scen...

Page 47 - Singer/Songwriter scene channel settings

39 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Singer/Songwriter scene channel settings Global settings Microphone CH 1 Guitar CH 2 Keyboard CH 3 MP3 Player CH 4/5 ToneMatch Active Vocal Mics Handheld Mics Active Acoustic Guitars Steel String w/piezo A...

Page 49 - DJ/Playback scene channel settings

41 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands DJ/Playback scene channel settings Global settings Microphone CH 1 Microphone CH 2 Not Used CH 3 MP3 Player CH 4/5 ToneMatch Active Vocal Mics Handheld Mics Active Vocal Mics Handheld Mics Active Utility F...

Page 50 - Drums and Bass; This scene is set up for a bass guitar, drum kit, and an MP3 player.

O PERATING I NSTRUCTIONS 42 English Deutsch Español Français Italiano Nederlands Svenska Dansk Drums and Bass This scene is set up for a bass guitar, drum kit, and an MP3 player. Figure 18 Example setup for Drums and Bass

Page 51 - Drums and Bass scene channel settings

43 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands Drums and Bass scene channel settings Global settings Bass Guitar CH 1 Kick Drum CH 2 Overhead CH 3 MP3 Player CH 4/5 ToneMatch Active Basses Active Bass 1 Active Percussion Kick, General Active Percussion...

Page 52 - The Works scene

O PERATING I NSTRUCTIONS 44 English Deutsch Español Français Italiano Nederlands Svenska Dansk The Works scene The Works scene is designed for electric and acoustic guitars, bass guitar, and keyboard. Figure 19 Example setup for The Works

Page 53 - The Works scene channel settings

45 O PERATING I NSTRUCTIONS Svenska Italiano Français Español Deutsch Dansk English Nederlands The Works scene channel settings Global settings Electric Guitar CH 1 Bass Guitar CH 2 Acoustic Guitar CH 3 Keyboard CH 4/5 ToneMatch Active Electric Guitars Miked Amp w/SM57 Active Basses Active Bass 3 Ac...

Page 54 - Factory Settings scene.

46 English Deutsch Español Français Italiano Nederlands Svenska Dansk F ACTORY S ETTINGS This section describes the settings in the T1 audio engine when it left the factory. To restore your T1 at any time to these factory settings, load Bose ® Factory Settings scene. Comp/Gate factory settings Type ...

Page 55 - Delay factory settings

47 F ACTORY S ETTINGS Svenska Italiano Français Español Deutsch Dansk English Nederlands Delay factory settings Type Mix Time Feedback Digital 30% 150ms 30% Analog 30% 275ms 20% Tape 30% 350ms 30% Reverb Type factory settings Type Time Bal. Plate 1.20s 50% Small 1.00s 50% Medium 1.75s 50% Large 2.20...

Page 56 - Cleaning; • You may clean the product enclosure using only a soft dry cloth.; Limited Warranty and Registration; Your T1 ToneMatch; Accessories; • T1 ToneMatch audio engine power supply; Troubleshooting

48 Svenska Italiano Français Español Deutsch Dansk English Nederlands C ARE & M AINTENANCE Cleaning • You may clean the product enclosure using only a soft dry cloth. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do not use any sprays ne...

Page 57 - Problem; If using the T1 with an L1; If using the T1 with an L1 model I system:

49 C ARE & M AINTENANCE Svenska Italiano Français Español Deutsch Dansk English Nederlands Problem What to do T1 is plugged in, power switch is on, but no power. • Make sure you have power at the AC outlet. Try operating a lamp or other equipment from the same AC outlet or test the outlet using ...

Page 58 - If using the T1 with an L1 model II system:

C ARE & M AINTENANCE 50 English Deutsch Español Français Italiano Nederlands Svenska Dansk T1 is on, but there is no sound – Continued. If using the T1 with an L1 model II system: • Turn off the power stand, re-seat the ToneMatch TM cable plug in the ToneMatch port, and turn on the power stand a...

Page 61 - Technical information; Mechanical

53 C ARE & M AINTENANCE Svenska Italiano Français Español Deutsch Dansk English Nederlands Technical information Mechanical Dimensions: .... 8.22" (L) x 6.52" (W) x 2.66" (H) 208.9mm (L) x 165.5mm (W) x 67.6mm (H) Weight: ............ 2.14 lb (0.97 kg) Electrical A/D and D/A conversi...