Bose Cinemate Cinemate Digital Home Theater Speaker System- Manuals

6 – English W ELCOME Thank you Thank you for choosing a CineMate ® 1 SR digital home theater speaker system for your home. It delivers superb acoustic performance in a stylish package that will greatly enhance your home theater experience. Please play the DVD Before you start following the step-by-s...

English – 7 W ELCOME Source connections to your TV Please be sure that all your sources, such as a cable/satellite set-top box or a DVD player, have both a video and an audio connection to your TV. • If you are connecting a source to your TV using an HDMI™ cable, there is no need for additional conn...

8 – English W ELCOME Wall mounting kit The speaker array can be mounted on the wall. If you wish to do this, contact Bose to purchase the WB-135 Wall Mount Kit. CAUTION: Do not use any wall-mounting hardware other than the WB-135 Wall Mount Kit to mount the speaker array on a wall. CAUTION: Do not p...

English – 9 S YSTEM S ETUP Putting the system together Note: The CineMate ® 1 SR system uses the reflective surfaces of your room to deliver wide, spacious sound. For best sound quality, the speaker array should not be placed inside a cabinet, or diagonally in a corner. Note: To avoid wireless inter...

10 – English S YSTEM S ETUP B. Plug one end of the selected audio cable into the corresponding audio output connector on your TV. Note: If you are using an optical cable, be sure to remove the protective cover from the plug. When inserting the plug into the connector, make sure it is pushed in all t...

English – 11 S YSTEM S ETUP Step 2: Connect source audio to the AUX input What you need for this step: Note: If you currently have audio/video sources such as a cable/satellite set-top box and a DVD player connected to your TV, do not disconnect them . The audio output from the source should be conn...

12 – English S YSTEM S ETUP Step 3: Connect a power cord to the speaker array What you need for this step: Plug the small end of the power cord into the connector labeled Power . Note: Do not plug the power cord into an AC power outlet at this time. You will be instructed to do this later in the set...

English – 13 S YSTEM S ETUP Step 4: Route the cables A. Arrange the cables as needed for your setup location. B. OPTIONAL: Secure cables under the clips in the channel running along the length of the speaker array. Channel Cable clip

14 – English S YSTEM S ETUP Step 5: Position the speaker array What you need for this step: CAUTION: The speaker array must be placed on a solid flat surface. For proper support, all of the feet on the bottom of the speaker array must be resting on the table top. A. Turn the speaker array over and p...

English – 15 S YSTEM S ETUP Step 6: Set up the Acoustimass ® module What you need for this step: CAUTION: Choose a stable and level surface for the Acoustimass module. Vibration can cause the speaker to move, particularly on smooth surfaces like marble, glass, or highly polished wood. A. When placin...

16 – English S YSTEM S ETUP D. Place the Acoustimass module according to the following guidelines: • For best sound quality, stand the Acoustimass module on its feet along the same wall as your TV, or along any other wall in the front third of the room. • The front opening of the module can face any...

English – 17 S YSTEM S ETUP First time startup Step 1: Install the remote batteries What you need for this step: A. Slide the battery cover off the back of the remote control. B. Install the two provided AA (IEC LR6) batteries, matching the plus and minus ends of the batteries to the polarity markin...

18 – English S YSTEM S ETUP A. Point the remote at the speaker array and press the system power button. B. Check that the power indicator on the speaker array is on (white), indicating the system is on, and that the status indicator is off. C. Put the ADAPTiQ ® headset on your head making sure the l...

English – 19 S YSTEM S ETUP F. Follow the audible instructions given to you by the system. Note: After hearing the language prompt in English, you can press the ADAPTiQ button to select another language. Then press the volume up button to continue. Note: After you select your language and press the ...

C INE M ATE ® 1 SR D IGITAL H OME T HEATER S PEAKER S YSTEM Operating Guide | Guía del usuario | Guide d’utilisation

2 – English Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, u...

4 – English C ONTROLS AND I NDICATORS Universal remote control The CineMate ® 1 SR system includes a universal remote that can be programmed to control your TV, DVD or Blu-ray Disc™ player, cable/satellite box, and VCR. With this universal remote, you can enjoy the convenience of using only one remo...

English – 5 C ONTROLS AND I NDICATORS 3. Press and hold until all five source buttons light. The remote is now in the setup mode. 4. Press . Only this button will remain lit. 5. On the number keypad, enter the device code for your brand of TV. The TV source button ( ) should blink twice and then tur...

6 – English C ONTROLS AND I NDICATORS Reading the system indicators Speaker array indicators Acoustimass module indicator Adjusting the bass level The bass control knob located on the rear of the Acoustimass module allows you to change the bass level output of the system. Turn the bass control knob ...

English – 7 C ONTROLLING S OURCES Changing the source control mode You can easily switch control from one source to another by pressing the appropriate source button at the top of the remote. In addition to controlling the selected source,the remote will always control the basic speaker functions (o...

8 – English C ONTROLLING S OURCES Watching TV To watch TV using your cable/satellite set-top box: 1. Press the TV power button to turn on your TV. 2. Press the TV Input button to select the correct input on your TV. 3. Press the CBL-SAT power button to turn on your cable/satellite set-top box. 4. Pr...

English – 9 C ONTROLLING S OURCES To watch TV using the tuner in your TV: 1. Press the TV power button to turn on your TV. 2. Press the TV Input button to select the correct input on your TV. 3. Press the TV source button to switch to the TV mode (the TV button will flash). 4. Select a channel. Watc...

10 – English C ONTROLLING S OURCES Navigating on-screen menus and guides The menu and program selection buttons will control only one source at a time. Select the source you want to use first. Note: If some navigation functions are not working for a particular source, try programming a different dev...

English – 11 C ONTROLLING S OURCES Using playback controls The functionality of the source playback buttons may vary depending on the type and brand of your device. For more information, see the owner’s guide that came with your device. Next DVD chapter or music CD track Stop, Pause, or Play Start I...

12 – English C ARE AND M AINTENANCE Troubleshooting Problem What to do No sound • Make sure the CineMate ® system is turned on and that the speaker array power indicator is on (solid white). • Make sure the CineMate system is not muted.• Increase the volume.• Verify the wireless connection between t...

14 – English C ARE AND M AINTENANCE Pairing the Acoustimass ® module with the speaker array Your speaker array and Acoustimass module are paired at the factory. However, should you ever need to pair them for any reason, do the following: 1. Unplug the Acoustimass module AC power cord. 2. Remove the ...

English – 15 C ARE AND M AINTENANCE Customer service For additional help in solving problems, contact Bose ® Customer Service. Refer to the address sheet included with the CineMate ® 1 SR system. Limited warranty Your CineMate ® 1 SR system is covered by a limited warranty. Details of the limited wa...