Bose AM324443 - Manuals - manualsarea.com

Page 2 - ii; English; AFETY; Please read this guide; Batteries

ii English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 S AFETY I NFORMATION Please read this guide Please take the time to follow the instructions in this guide carefully. They will help you set up and use your system properly so you can enjoy its advanced features. Please save this guide for future r...

Page 3 - YSTEM; Welcome; Physical setup phase:; Unpacking

1 TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 S YSTEM S ETUP Welcome Thank you for choosing a Bose ® LIFESTYLE ® system for your home. This guide provides step-by-step instructions for setting up your new system. There are two phases to the set...

Page 4 - Control console kit; What you need for the following steps:; Control console; From Kit 1

2 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 Control console kit What you need for the following steps: 1. Place the control console on a flat, stable surface near your TV. Note: Until your system is completely installed, it may be helpful to keep the control console positioned...

Page 5 - on the control console.

3 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 2. Plug one end of the HDMI cable into an HDMI INPUT connector on your TV. If an HDMI cable is already connected to an HDMI input on your TV, you can use this one. Just disconnect the other end. 3. Plug the other end of the HDMI cabl...

Page 6 - Plug one end of the audio input cable into the; Acoustimass; connector on the control; Make sure you push the plug in as far as; Power

4 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 4. Plug one end of the audio input cable into the Acoustimass ® Module connector on the control console. Make sure the flat surface with the arrow on the plug faces up. Leave the other end of the cable on the floor. You will be asked...

Page 7 - Acoustimass module; From Kit 2

5 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 Acoustimass ® module kit What you need for the following steps: 1. Place the Acoustimass module on the floor at the same end of the room as the TV. Make sure there is a live AC outlet nearby. 2. Lay the module on its side and locate ...

Page 8 - DO NOT; connector on the Acoustimass; AC Power; connector on the Acoustimass module.; Media Center

6 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 CAUTION: DO NOT stand the Acoustimass ® module on its front or back end. 3. Plug the free end of the audio input cable into the Media Center connector on the Acoustimass module. Make sure the flat surface with the arrow faces the fro...

Page 9 - Speaker kit

7 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 Speaker kit What you need for the following steps: From Kit 3: System speakers(one set of the three types shown) Note: You can place system speakers on wall brackets or floor stands. To purchase these accessories, contact your local ...

Page 10 - • Keep each speaker within 3 ft (1 m) of the TV

8 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 1. Place the center front speaker on a stable and level surface directly above or below the center of your TV screen as in the following example. 2. Place one speaker to the left and one to the right of the TV. • Keep each speaker wi...

Page 11 - will reach from the speakers to the Acoustimass; Colored connectors

9 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 3. Place the rear speakers toward the back of the room behind the viewers at ear height (when seated) or higher, if possible. • Make sure the 50 ft (15.2 m) rear speaker cables will reach from the speakers to the Acoustimass ® module...

Page 13 - Put the Acoustimass; For Jewel Cube; ALTERNATE

11 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 8. Connect the speaker cable to the type of speaker you have. 9. Put the Acoustimass ® module in its final position: • Upright (BEST) or on either side (ALTERNATE). • With the front opening facing into the room. • At least 18 in (45...

Page 14 - Interactive kit; intelligent integration system.; • Before you start, make sure your speakers and; Slide the battery cover back into place.; ADAPTiQ; From Kit 4; Battery compartment cover

12 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 Interactive kit What you need for the following steps: Congratulations! At this point you have set up the control console, the Acoustimass ® module, and the speakers. You are now ready to turn on your system and enter the interactiv...

Page 15 - Other Kit 4 items; Stereo audio cable

13 S YSTEM S ETUP TAB 5 TAB 4 TAB 6 TAB 8 TAB 7 English TAB 3 TAB 2 4. Press the power button ( ) on the control console to turn on your system. Because the system is in a low power state when in standby, it takes several seconds to start. When the power light changes from blinking to steady green, ...

Page 16 - Applying rubber feet; When placing the Acoustimass; If you have setup problems; For additional help in solving problems, contact Bose; Bottom panel; Applicable only for LIFESTYLE

14 S YSTEM S ETUP English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4 Applying rubber feet When placing the Acoustimass ® module on bare floors, you can attach the included rubber feet to the bottom of the module for greater stability and to protect your floor. Vibration can cause speakers to move, pa...