Bosch LTC 8600 - Manuals

LTC 8600 | LTC 8800 Series | 3 Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Safety Precautions Important Notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to t...

4 | LTC 8600 | LTC 8800 Series F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such as grounding for any out...

LTC 8600 | LTC 8800 Series | 5 Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Power lines - Do not locate the camera near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. SELV All the input/outp...

6 | LTC 8600 | LTC 8800 Series F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. destinées à fournir une protection raisonnable contre les interférences nuisibles quand l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet de l'e...

LTC 8600 | LTC 8800 Series | 7 Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA R...

LTC 8600 | LTC 8800 Series en | 9 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 2 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper. Verify that all parts shown in the Parts List ...

10 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 3 Service If the unit needs repair, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers • USA • Repair Center ...

LTC 8600 | LTC 8800 Series en | 11 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 4 Description These Allegiant video switcher/control systems combine both switching and com-puter technology to provide powerful performance and unique system features for the security us...

LTC 8600 | LTC 8800 Series en | 13 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 5 Allegiant Feature Summary Table These Allegiant Series systems are available in two (2) operating configurations: a base system and the base system with an optional PC based software pa...

LTC 8600 | LTC 8800 Series en | 15 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 6 System Components 6.1 LTC 8601 Series Systems • LTC 8601 Series Main CPU Bay A modular equipment bay which contains the system's microprocessor module (LTC 8610/01), the power supply mo...

LTC 8600 | LTC 8800 Series en | 17 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 7 System Accessory Components The Allegiant Series accessory products provide many optional features to the base system. A brief description of accessory products is provided below. Compl...

18 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 7.5 LTC 8555 Series Keyboards The LTC 8555 Series keyboards are compact, full function keyboards for use with Allegiant Series matrix switchers. LED readouts display real time system stat...

LTC 8600 | LTC 8800 Series en | 19 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 7.10 LTC 8569, LTC 8570, LTC 8571, LTC 8572 Series Code Merger Units These series are control code merger and line driver units used to combine Allegiant biphase control code from two (up...

LTC 8600 | LTC 8800 Series en | 21 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 7.19 LTC 8782 Series Code Translator Units The LTC 8782 Series code translators are accessory units that convert biphase code to other manufacturers’ control codes, or convert other manuf...

22 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 7.23.1 Integration Server The Integration Server is a versatile software package used to integrate multiple systems that are not ordinarily compatible with each other. These systems can i...

LTC 8600 | LTC 8800 Series en | 23 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 7.24 LTC 8506/00 PC-to-Console Port RS-232 Cable The LTC 8506/00 is an RS-232 grade cable with 9-pin D-connectors on each end that is used to connect an Allegiant's system's console port ...

28 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 8 Installation Procedure 8.1 Main CPU Bay Installation Before discarding the shipping cartons, verify that the various pieces of equipment have no evidence of carrier damage. CAUTION Do n...

LTC 8600 | LTC 8800 Series en | 29 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. being used, the modules should be inserted in a left-to-right manner so that the lower camera numbers are used first. Figure 5: Typical Video Input Module Insertion The VIMs are identical...

30 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Figure 7: Typical CPU Module Insertion If an LTC 8802 Series Monitor Expansion is supplied, it will contain an LTC 8816/01 Data Receiving Module in this slot. Install the main bay CPU or ...

LTC 8600 | LTC 8800 Series en | 31 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. eras, numbers 97 through 128) should be attached to the main bay connectors labeled “VIDEO 97-112” and “VIDEO 113-128.” Extra connectors are provided on the main bay for “looping” purpose...

32 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 8.6.1 LTC 8600 Series or LTC 8800 Series Video Input Terminations Each VIM card for an LTC 8600 Series or an LTC 8800 Series system has DIP switches for selecting the termination of each ...

LTC 8600 | LTC 8800 Series en | 33 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 8.6.3 LTC 8802 Series Monitor Expansion Bay Data Connections The LTC 8802 Series Monitor Expansion Bay is supplied with a 1 m (3 ft) data com-munication interconnect cable. Install this c...

34 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 9 Optional Accessories Installation 9.1 General Accessory Installation There are many accessory products available for the Allegiant Series, including key-boards, alarm interface units, c...

36 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 10 Satellite Configuration Installations Due to the many variations possible, only general guidelines can be covered for installing satellite systems. Refer to the Appendix Section of thi...

LTC 8600 | LTC 8800 Series en | 37 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 10.2 Main Site “Trunk Line” Video Inputs At the main site, video trunk line connections coming from each of the remote site(s) should be connected (and properly terminated) using an avail...

38 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Figure 11: Satellite Site Sample Program Showing Logical Camera Numbers and Titles To maintain a sense of order, it is preferable to program a satellite for a range of camera numbers. For...

40 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 10.6 Special Programming for “Cascaded” Satellite System Configurations In a 3-tier cascaded satellite system, it is highly recommended for the system design to have more trunks lines bet...

LTC 8600 | LTC 8800 Series en | 41 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 10.7 Alarm Inputs in Satellite Systems Any alarm inputs to the main site, which have been programmed to activate cameras located at satellites, will operate normally except when limited b...

42 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 11 Feature Selection Certain user-selectable features can provide enhanced Allegiant system operation capabilities. Any desired changes can be made now or delayed until specific system re...

LTC 8600 | LTC 8800 Series en | 43 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 12 Main Power Connections 1. Attach the supplied AC power cord(s) between the bay(s) and appropriate AC power source. Verify that power supply is configured for desired voltage input. If ...

LTC 8600 | LTC 8800 Series en | 45 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 13 Video Monitor Display The Allegiant Series systems feature an integral text overlay with two or three rows of 24 characters each. There are over 2000 different characters that can be d...

48 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 13.2.10 Location 12 - Sequence Status Indication This location indicates the status of the sequence “active” in the monitor. There are four possible character combinations: a. ^ R indicat...

LTC 8600 | LTC 8800 Series en | 49 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 13.6 Camera Number The left-most display on the top line shows the camera number. This number is gen-erated by the system and is always displayed. Each number is unique and identifies thi...

50 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 14 Factory Default Settings As the Allegiant system is shipped from the factory, certain features are placed in a default configuration. The installer can select some of these features at...

LTC 8600 | LTC 8800 Series en | 55 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 14.2.2 Middle Data Receiver DIP Switch S2 The lower DIP switch provides certain user-selectable options. These options are as follows: • Switch 1 of S2 This switch is reserved and should ...

56 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 15 User Information 15.1 User Priority Levels There are eight (8) levels of user priority in the Allegiant system. Each of the 32 users in the Allegiant system has a default priority leve...

LTC 8600 | LTC 8800 Series en | 57 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. word can be changed using the keyboard (see User Function number 10). Refer to the specific section of the operation instructions for exact procedures of using key-board User Functions. A...

58 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 16 Alarm Information 16.1 General The ability to automatically switch video in response to an external signal (usually a contact closure) is a necessary feature in any video switching sys...

LTC 8600 | LTC 8800 Series en | 59 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 16.5 Alarm Activated Pre-position Alarm activated pre-position capability exists in each of the three (3) alarm response modes. This enables a pan/tilt/zoom equipped camera to automatical...

LTC 8600 | LTC 8800 Series en | 61 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 16.7 Alarm Relay Response Allegiant alarm responses include the ability to trigger isolated alarm relay outputs from an LTC 8540/00 Alarm Interface unit. An alarm output is typically used...

62 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 17 Keyboard Operation 17.1 General Primary operation of an Allegiant switcher is controlled via the system keyboard. The two types of keyboards currently available are: • Conventional LTC...

LTC 8600 | LTC 8800 Series en | 63 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 17.2.2 Keyboard Log-off Procedure If the log-in feature has not been enabled, this action is not applicable. If the feature has been enabled, press: User Log-off [ User , then OFF ]. Any ...

64 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 17.4.3 Lock or Unlock Control of a Monitor • When using IntuiKey keyboards, press [ Device Lockout] , located on the main Allegiant menu screen for these options. • With LTC 8555 Series k...

66 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 17.5.2 Arm/Disarm All Alarms Press [ Alarm Control] , located on the main Allegiant menu screen to enter the menu screen containing these options. When using the IntuiKey keyboard: • To a...

68 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 17.7 Sequence Programming 17.7.1 Programming a Simple Camera Sequence The Allegiant system has powerful sequencing capabilities. Using a system key-board, it is possible to enter sequence...

LTC 8600 | LTC 8800 Series en | 69 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. mode, press Exit/Save [Prog] . Press Exit/Run [Run] , to exit the programming mode, store the sequence into memory, and start the sequence running. The switcher steps through the five (5)...

70 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 17.7.2 Programming a SalvoSwitching Camera Sequence A SalvoSwitching sequence can be used to switch a group of monitors simultane-ously as a synchronized group. To program a Salvo sequenc...

LTC 8600 | LTC 8800 Series en | 71 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 18 Keyboard User Functions 18.1 General Information User functions are keyboard operations which are used infrequently, but provide important system options. NOTE: Certain functions are r...

LTC 8600 | LTC 8800 Series en | 73 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. User Function 1 - Local Keyboard Test User Function 1 can be used as a local test to ensure that all the keyboard LEDs and switches are working. This function automatically calibrates the...

LTC 8600 | LTC 8800 Series en | 75 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. User Function 8 - Set Date User Function 8 enables the user to set the date displayed on all system monitors. If using the LTC 8555 Series keyboard, use the joystick to select the day, mo...

78 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 User Function 26 - Set Display Option On All Monitors This function is similar to User Function 6, except it selects the monitor display option of all monitors in the system. The User Fun...

80 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 User Function 38 - Printer Port Mode This function allows configuration of the system's PRINTER port for use with a LTC 8712 Series Console Port Expander accessory device. Move the joysti...

LTC 8600 | LTC 8800 Series en | 81 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. diately be overridden by operators at the satellite location having any priority level. This situation is more likely to be encountered in 3-tier satellite systems that do not have a good...

82 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Some minor disturbance of the video images may be visible for 1 or 2 seconds while the cameras are being adjusted. If no changes are noticed, check to make sure that you have compatible d...

LTC 8600 | LTC 8800 Series en | 83 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 19 Maintenance Information The Allegiant system has been designed to perform for long periods of time with lit-tle or no maintenance. Occasionally the need will arise to clean the keyboar...

84 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 19.3 AC Line Fuse Replacement The AC line fuse on Allegiant power supply models is found on the rear of the equip-ment bay near the line cord connector. Power supply models for 220-240 VA...

LTC 8600 | LTC 8800 Series en | 99 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 21 ERROR MESSAGES • Error 01 - Invalid camera request The camera number entered from the keyboard does not exist. If using the optional LTC 8850 GUI Software or the optional LTC 8059 MCS,...

LTC 8600 | LTC 8800 Series en | 101 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. • Error 80 - Trunk not available An attempt was made to access a remote camera connected to a satellite sys-tem, but no unused trunk lines are currently available. Depending on system co...

102 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 22 Troubleshooting Guide The Allegiant system has been designed to perform reliably for long periods of time. All circuitry consists of state-of-the-art components designed around a modu...

LTC 8600 | LTC 8800 Series en | 103 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 22.2 Keyboard Checkout 1. No keyboard display indicators: Check interconnect cable for cut or broken wires between keyboard and main CPU bay. Replace cable if necessary. Relo-cate keyboa...

104 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 22.4 Remote Receiver/Driver Functions Inoperative 1. All receiver/drivers and functions inoperative: Verify power LED indicator on Signal Distribution Unit is lit. If not, check fuses on...

LTC 8600 | LTC 8800 Series en | 105 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. 23 GLOSSARY OF TERMS Auxiliary An auxiliary is an additional function of the remote receiver/driver which permits on/off control of outputs available to the user. In the Allegiant system...

LTC 8600 | LTC 8800 Series en | 107 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. Appendix A Satellite Systems A satellite system configuration is usually used for a medium to large distributed system, or to obtain extremely large matrix sizes configured more conventi...

114 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 Appendix B Installation Checklists A simplified guide for those who are already familiar with installing and program-ming Allegiant systems. MAIN BAY HARDWARE INSTALLATION Unpack equipme...

LTC 8600 | LTC 8800 Series en | 115 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. Appendix C Quick Reference Cable Interconnections C.1 Main Bay Video COAX-All video input and output connections to the Allegiant system should be made using a good grade of RG59U, RG6, ...

116 | en LTC 8600 | LTC 8800 Series Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 | 2.0 | 2009.03 C.4 Signal Distribution Unit CONNECTION TO MAIN BAY The Distribution unit is supplied with a 3 m long (10 ft) multiconductor cable with 9-pin D-type connectors. Power to the unit is prov...

LTC 8600 | LTC 8800 Series en | 117 F.01U.127.393 | 2.0 | 2009.03 Instruction Manual Bosch Security Systems, Inc. Appendix D Main Bay Rear Panel Connector Pin-outs Console Port RS-232 Pin-outs Pin # Designation 1 CHASSIS GND 2 Rx 3 Tx 4 CTS 5 RTS 6 NO CONNECTION 7 DATA GND 8 NO CONNECTION 9 NO CONNE...