Bosch DWK91LT65 - Manuals

Environmental protection and saving energy  en 5 ▶ Do not use harsh or abrasive detergents. ▶ Clean stainless steel surfaces in the direction of thefinish only. ▶ Never clean controls with stainless steel cleaners. Condensation that flows back in may damage the ap-pliance. ▶ The air extraction duct ...

en  Familiarising yourself with your appliance 6 Familiarising yourself with your appliance 5  Familiarising yourself with your appliance 5.1 Overall view You can find an overview of the parts of your appliancehere. 3 1 2 4 5 1 Glass plate 2 Control panel 3 Appliance 4 Front grease filter 5 Lower gr...

Before using for the first time  en 7 5.3 Control panel, variant 2 You can use the control panel to configure all functions of your appliance and to obtain information about the operat-ing status. Switching the appliance on or off Switching the lighting on or offSetting the brightnessResetting the f...

en  Additional functions in the Home Connect app 8 ivity, the optimum fan setting is automatically switchedon. You can change the sensor sensitivity setting in theHome Connect app. ¡ Factory setting: 3 ¡ Lowest setting: 1 ¡ Highest setting: 5 7.10 Switching on the lighting The lighting can be switch...

Home Connect  en 9 8.7 Interval ventilation In order to regularly ventilate your kitchen, you can usethe interval ventilation. With interval ventilation, the vent-ilation system switches on and off in the selected set-ting for the selected time. 8.8 Favourites button You can specify 2 favourites fun...

en  Hob-based hood control 10 9.4 Remote diagnostics Customer Service can use Remote Diagnostics to ac-cess your appliance if you contact them, have your ap-pliance connected to the Home Connect server and ifRemote Diagnostics is available in the country in whichyou are using the appliance. Tip:  Fo...

en  Troubleshooting 12 Requirement:  The grease filters have been removed. →  "Removing the grease filter", Page 11 1. Observe the information regarding the cleaningagents. →  "Cleaning products", Page 10 2. Place the grease filters loosely into the dishwasher.Do not clean heavily so...

Disposal  en 13 Fault Cause and troubleshooting The appliance doesnot respond. It may need to be restarted. ▶ Press and hold ⁠ and  for at least 10 seconds. a All of the buttons flash. a The appliance is restarted. The restart does notwork. Different causes are possible. 1. Disconnect the appliance ...

en  Declaration of Conformity 14 Accessories Order number Clean Air Plus recircula-tion kit – flue-free, angledextractor hood DWZ1BK1V6 Long Life recirculation kit– flue-free, angled ex-tractor hood DWZ1BK1R1 Long Life odour filter – re-placement DWZ1BK1P1 Accessories Order number Duct extension –10...

Installation instructions  en 15 ¡ The appliance is operated in its as-delivered condi-tion. ¡ The intermediate position of the glass front hasbeen used to check the specified appliance proper-ties. ¡ Ensure that the filters do not move during the meas-urement (by changing the appliance position to ...

en  Installation instructions 16 19.3 Dimensions You will find the dimensions of the appliance here 19.4 Safety clearances Comply with the safety clearances for the appliance. For Australia and New Zealand the minimum safetyclearance above electrical cooktops must be 600 mm.  19.5 Secure installatio...

Installation instructions  en 17 WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases beingdrawn back in. Room-air-dependent heat-pro-ducing appliances (e.g. gas, oil, wood or coal-operated heaters, continuous flow heaters orwater heaters) obtain combustion air from theroom in which they a...

Installation instructions  en 19 WARNING ‒ Risk of electric shock! It must always be possible to disconnect the appliancefrom the electricity supply. The appliance must only beconnected to a protective contact socket that has beencorrectly installed. ▶ The mains plug for the mains power cable must b...

en  Installation instructions 20 8. Place the detached part at the required position.Observe the entire length of the flue duct. 9. Drill the 8 mm diameter holes to a depth of 80 mmfor the fastenings. 10. Remove the template. Installing the appliance bracket 1. Screw on the appliance bracket for the...

en  Installation instructions 22 11. Insert the grease filters. 12. Connect the appliance to the power supply. Piping Note:  If you are using an aluminium pipe, smooth the connection area beforehand.We recommend piping with an exhaust air pipe dia-meter of 150 mm.If the diameter of the air extractio...

Thank you for buying a Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • Expert tips & tricks for your appliance • Warranty extension options • Discounts for accessories & spare-parts • Digital manual and all appliance data at hand • Easy access to Bos...