Bosch DVR670 - Manuals - manualsarea.com

Page 2 - P A G E 2 O F 9; Live and recorded audio from an IP camera is not supported.; See the following steps (1 to 4) to add an IP camera to the DVR670 v2.1

P A G E 2 O F 9 • An HD camera can be used for recording SD stream 2 for eventual recording and playback on the DVR. Display the live HD stream with Bosch Video Client. • Live and recorded audio from an IP camera is not supported. • The IP feature will be available on a DVR 670 platform using a simp...

Page 3 - P A G E 3 O F 9; Figure 1

P A G E 3 O F 9 Step 1. Enter the DVR ‘Camera-Camera’ menu. In the Camera-Camera screen (see Figure 1) click on the row for the required channel (the row will be selected). Now click the Enable column to toggle between Off , On and IP camera (Off = disabled; On = analog camera). When IP camera is se...

Page 4 - P A G E 4 O F 9; Figure 2

P A G E 4 O F 9 Step 2. When the ‘Configuration’ screen appears (see Figure 2), click the Auto Detect button to scan for all the IP cameras in the same subnet. A new ‘Assign’ screen appears – see Step 3. Figure 2 Note: If required, choose Manual Setup to manually assign the correct IP camera configu...

Page 5 - P A G E 5 O F 9; Now click the; Assign; Figure; Refresh; to rescan the IP cameras in the same subnet.

P A G E 5 O F 9 Step 3. When the new ‘Assign’ screen appears (see Figure 3), click on the row containing the required IP camera from the list (the row will be selected). Now click the Assign button to assign the chosen IP camera to the currently selected channel (shown on top of the screen). A ‘Setu...

Page 6 - P A G E 6 O F 9; In the ‘Setup’ screen, assign the required; button to disconnect an assigned IP camera and channel number.

P A G E 6 O F 9 Step 4. In the ‘Setup’ screen, assign the required Stream (1 or 2), Video Port (default 554), Command Port (default 80), plus correct User Name and Password . When ready, click the OK button. Figure 4 Note: If required, use the Undo button to disconnect an assigned IP camera and chan...

Page 7 - P A G E 7 O F 9; Figure 5; Press the; Connect; box on the right of the screen. Supported resolutions are:; IPS

P A G E 7 O F 9 Figure 5 Press the Connect button to make the IP connection between the camera and selected channel. If the IP camera resolution settings are supported by the DVR, then a picture of the camera will appear in the box on the right of the screen. Supported resolutions are: IPS Resolutio...

Page 8 - P A G E 8 O F 9; Figure 6; Click; OK; When the camera is correctly connected, press; Exit; to save all settings and return to the Camera-

P A G E 8 O F 9 Figure 6 Click OK to acknowledge the message and then change the settings in the IP camera to obtain acceptable resolution settings (see the camera Operator Manual for how to do this). When the camera is correctly connected, press Exit , then OK to save all settings and return to the...

Page 9 - P A G E 9 O F 9