Page 3 - Table of Contents
RAID Subsystem DVA-12T | Installation Manual Table of Contents | en 3 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Table of Contents 1 Warnings and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Warning ...
Page 5 - Warnings and Certifications; Warning; interference with nearby radio and television reception.; Safety Precautions; Precautions and Instructions; front and rear. The airflow direction is from front to back.; ESD Precautions; Certification; FCC Class B Radio Frequency Interference Statement
RAID Subsystem DVA-12T | Installation Manual Warnings and Cer tifications | en 5 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 1 Warnings and Certifications 1.1 Warning A shielded power cord is required in order to meet FCC emission limits and also to prevent interference with nearby radio and...
Page 6 - CB
6 en | Warnings and Certifications RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems this user’s guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation....
Page 7 - Introduction; shown in; Product Overview; is accessed through the rear of the subsystem enclosure.; iSCSI Host Ports; Connectivity
RAID Subsystem DVA-12T | Installation Manual Introduction | en 7 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 2 Introduction This hardware manual briefly introduces the DVA 12 T iSCSI-to-SATA-II storage subsystem shown in Figure 2.1 . 2.1 Product Overview The RAID subsystem comes with two (2)...
Page 8 - using Ethernet switches.; Enclosure Chassis; Chassis Overview; rack or enclosure cabinet.
8 en | Introduction RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems identical with connecting Ethernet network devices either point-to-point to iSCSI initiators or using Ethernet switches. Other Concerns : - Subnet, gateway, and other access control m...
Page 9 - Front Panel Overview; Rear Panel Overview
RAID Subsystem DVA-12T | Installation Manual Introduction | en 9 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 2.2.2 Front Panel Overview The front section of the subsystem features a 4x3 layout for twelve (12) 3.5-inch drives. The two (2) handles on the front of the subsystem enable you to ea...
Page 10 - The rear panel shown in; Backplane Board; Subsystem Components; Front Handles; release latch to secure the position of the handle when closed. (See
10 en | Introduction RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems The rear panel shown in Figure 2.5 accommodates the following components: • RAID controller module : A controller board and a DDR RAM DIMM module are housed in the controller module ...
Page 11 - Drive Trays; The RAID Controller Module; sharing or network zoning.
RAID Subsystem DVA-12T | Installation Manual Introduction | en 11 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Fig. 2.7 Opening One of the Front Handles 2.3.2 Drive Trays Fig. 2.8 Drive Tray Front View The RAID subsystem comes with twelve (12) drive trays (see Figure 2.8 ) designed to accom- ...
Page 12 - Controller Module Interfaces; Section 4 Subsystem Monitoring; DIMM Module
12 en | Introduction RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 2.3.4 Controller Module Interfaces All external interfaces that connect to external devices are located on the controller module rear panel shown below. The interfaces are listed bel...
Page 13 - Power Supply Units; Section 8 Spare Parts and Accessories; Cooling Modules
RAID Subsystem DVA-12T | Installation Manual Introduction | en 13 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 ies to their full capacity. It normally requires approximately twelve (12) hours for the battery to be fully charged. If the battery is not fully charged after twelve (12) hours, the...
Page 14 - Subsystem Monitoring; monitoring features are included in the subsystem.; C bus; Cooling modules; LED Indicators; mine the cause and rectify the problem immediately.
14 en | Introduction RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems their rotation speed to generate more cooling air to extract the heat generated by the hard drives. Fig. 2.12 Cooling Module 2.4 Subsystem Monitoring The RAID subsystem comes with a ...
Page 15 - Hot-swappable Components; Hot-swap Capabilities; removed from the subsystem.; Components; The following components are hot-swappable:; Normalized Airflow
RAID Subsystem DVA-12T | Installation Manual Introduction | en 15 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Event notification messages indicate the completion or status of array configuration tasks and are always accompanied by two (2) or three (3) successive and prolonged beeps. 2.5 Hot-...
Page 16 - Hardware Installation
16 en | Hardware Installation RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 3 Hardware Installation 3.1 Introduction This chapter gives detailed instructions on how to install the subsystem. When installing the subsystem, it is necessary to mount th...
Page 17 - Static-free Installation; General Installation Procedure; Unpacking
RAID Subsystem DVA-12T | Installation Manual Hardware Installation | en 17 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 5. Handle the system modules by the retention screws, eject levers, or the modules metal frames/face plates only. Avoid touching the PCB boards and connector pins. 6. None o...
Page 18 - Unpacking the Subsystem; Installation Procedure
18 en | Hardware Installation RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems Installation Procedure Flowchart Table 3.1 shows a flowchart of the installation procedure. As you complete each step, check off the “Done” box on the right. Please use this...
Page 21 - Subsystem Monitoring Overview; using the existing Ethernet ports.
RAID Subsystem DVA-12T | Installation Manual Subsystem Monitoring | en 21 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 4 Subsystem Monitoring 4.1 Subsystem Monitoring Overview The RAID subsystem is equipped with a variety of self-monitoring features that help to keep subsystem managers inform...
Page 22 - Status-indicating LEDs; Brief Overview of the LEDs; LEDs
22 en | Subsystem Monitoring RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 4.2 Status-indicating LEDs 4.2.1 Brief Overview of the LEDs The following devices all come with LEDs that inform subsystem managers about the opera- tional status of the comp...
Page 23 - LED
RAID Subsystem DVA-12T | Installation Manual Subsystem Monitoring | en 23 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 4.2.3 Controller Module LEDs The rear panel of the controller module is shown in Figure 4.2 . The LEDs on the controller’s faceplate that can be accessed from the rear of the...
Page 25 - Cooling Module LEDs; When the LED is off, it indicates the fan is functioning properly.; Audible Alarm; Default Threshold Values
RAID Subsystem DVA-12T | Installation Manual Subsystem Monitoring | en 25 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 4.2.7 Cooling Module LEDs Each cooling module has one (1) red LED on the back. The LED corresponds to the single fan in the cooling module. (See Figure 4.6 ) When the LED is ...
Page 26 - Failed Devices; C Monitoring
26 en | Subsystem Monitoring RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems The thresholds in Table 4.6 are default threshold values and may be changed. 4.3.2 Failed Devices If any of the following components fails, the audible alarm will be triggere...
Page 27 - Subsystem Connection and Operation; Cabling; Channel Default Settings
RAID Subsystem DVA-12T | Installation Manual Subsystem Connection and Operation | en 27 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 5 Subsystem Connection and Operation 5.1 Cabling Following are the requirements on the type of cables used to connect the subsystem’s iSCSI host ports: • Gigabi...
Page 28 - In the configuration shown in
28 en | Subsystem Connection and Operation RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 5.2.1 Direct-Attached, Single Connection In the configuration shown in Figure 5.1 , the iSCSI drive is attached directly to the VIP X1600 encoder unit. The adva...
Page 29 - Connection through an Ethernet Switches
RAID Subsystem DVA-12T | Installation Manual Subsystem Connection and Operation | en 29 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 5.2.2 Connection through an Ethernet Switches In the configuration shown in Figure 5.2 all codecs and cameras are connected via an Ethernet Switch. This is a st...
Page 30 - Power On; Check List
30 en | Subsystem Connection and Operation RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 5.3 Power On Once all the components have been installed in the RAID subsystem, the iSCSI ports have been connected to the network, power on the network devices...
Page 31 - Power On Status Check; sound in a hastily repeated manner.; Power Off Procedure
RAID Subsystem DVA-12T | Installation Manual Subsystem Connection and Operation | en 31 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 5.3.4 Power On Status Check Once the subsystem has been powered on, the status of the entire subsystem should be checked to ensure that everything is running sm...
Page 32 - Subsystem Maintenance and Upgrading; Overview; Maintenance
32 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 6 Subsystem Maintenance and Upgrading 6.1 Overview 6.1.1 Maintenance Constant monitoring and maintenance of your RAID subsystem will minimize subsystem down- t...
Page 33 - Replacing Controller Module Components; Controller Module Maintenance Overview; Section 3 Hardware Installation; Removing the Controller Module; Section 5 Subsystem Connection and Operation; Remove the controller module
RAID Subsystem DVA-12T | Installation Manual Subsystem Maintenance and Upgrading | en 33 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 6.2 Replacing Controller Module Components The controller module consists of the components shown below: • DIMM Module The DIMM module can be replaced when the...
Page 34 - Replacing the Controller Module; DIMM Module Replacement; DIMM Module Considerations
34 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 6.2.3 Replacing the Controller Module If the controller module has failed, it must be replaced. To replace a failed controller module: 1. Remove the failed con...
Page 35 - DIMM Module Replacement Procedure; Section 6.2.3 Replacing the Controller Module; Reinstall the controller module.
RAID Subsystem DVA-12T | Installation Manual Subsystem Maintenance and Upgrading | en 35 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 6.3.2 DIMM Module Replacement Procedure If a DIMM module fails or if a DIMM module with a higher memory capacity is required, the onboard DIMM module must be r...
Page 36 - Replacing a Faulty BBU Module; BBU Warnings and Precautions; provided otherwise will void our warranty.; Procedure; then gently push the BBU module into the slot. (See
36 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 6.4 Replacing a Faulty BBU Module The BBU module is installed in the rear panel of the subsystem above the controller module. It consists of a battery cell pac...
Page 37 - Replacing a Failed PSU Module; PSU Module Overview
RAID Subsystem DVA-12T | Installation Manual Subsystem Maintenance and Upgrading | en 37 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Fig. 6.5 Install the BBU Module 3. Secure the BBU module to the enclosure. Tighten the two (2) retention screws as shown above on the back of the BBU module. 4...
Page 38 - the PSU module out of the subsystem. (See
38 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems Fig. 6.6 PSU Parts Identification Fig. 6.7 Removing the PSU Retention Screw 2. Once the power switch has been turned off, remove the power cable that connects ...
Page 39 - replacement PSU module into the subsystem.; Cooling Module Maintenance; Cooling Module Overview; maintained at all times.; Replacing a Cooling Module
RAID Subsystem DVA-12T | Installation Manual Subsystem Maintenance and Upgrading | en 39 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Fig. 6.9 Remove the Cooling Module 6. Reinstall the cooling module into the new PSU module. To do this, align the cooling mod- ule with the lower level of the ...
Page 40 - Remove the cooling module.; Replacing a Failed Hard Drive; Hard Drive Maintenance Overview
40 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems To replace a cooling module, please follow these instructions: 1. Remove the cooling module. Two (2) clips secure the cooling module to the subsystem. To remov...
Page 41 - Replacing a Hard Drive
RAID Subsystem DVA-12T | Installation Manual Subsystem Maintenance and Upgrading | en 41 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 • Remove drives slowly: When removing a drive tray, withdraw it from the enclosure slowly. If the drive tray is removed too quickly a drive I/O timeout might o...
Page 42 - Install the new hard drive.
42 en | Subsystem Maintenance and Upgrading RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems Fig. 6.12 Drive Tray Key-Lock Rotation 4. Remove the drive tray with the hard drive. Once the drive tray is dislodged from the chas- sis, gently and carefully ...
Page 43 - Specifications; Technical Specifications; Operating
RAID Subsystem DVA-12T | Installation Manual Specifications | en 43 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 7 Specifications 7.1 Technical Specifications Environmental Specifications Humidity 5 to 95% (non condensing – operating and non-operating) Temperature Operating : 0º to 40ºC Non-o...
Page 44 - Controller Specifications; Warning Alarms
44 en | Specifications RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 7.2 Controller Specifications Warning Alarms • Audible alarms • System LEDs • Event notification via the RAIDWatch Manager (LAN broadcast, email, fax, MSN, ICQ, SMS, and SNMP traps...
Page 45 - Drive Tray Specifications; Specification
RAID Subsystem DVA-12T | Installation Manual Specifications | en 45 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 7.3 Drive Tray Specifications 7.4 Power Supply Specifications 7.5 Cooling Module Specifications 7.6 RAID Management Specification Height 28mm Width 110mm Depth 218.92mm Key Lock Ye...
Page 46 - Fault Tolerance Management
46 en | Specifications RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 7.7 Fault Tolerance Management Event Broadcast/Alert Yes (via RAIDWatch sub-modules, the Configuration Client utility or NPC) Event Notification Yes (via RAIDWatch sub-modules, Con...
Page 47 - Spare Parts and Accessories; Spare Parts; Model Name
RAID Subsystem DVA-12T | Installation Manual Spare Parts and Accessories | en 47 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 8 Spare Parts and Accessories 8.1 Spare Parts Spare parts that come with the subsystem are listed in Table 8.1 . 8.2 Accessories The Accessories and their model names ...
Page 48 - Pin Outs; COM1 Cable: DB9 and Audio Jack Pin Outs; COM 1 Cable; Ethernet Port Pin Outs; CN1 Pin Number
48 en | Pin Outs RAID Subsystem DVA-12T | Installation Manual F.01U.027.798 | V1 | 2006.06 Bosch Security Systems 9 Pin Outs 9.1 COM1 Cable: DB9 and Audio Jack Pin Outs Table 9.1 RS-232C (Audio Jack) Pin Outs COM 1 Cable : Connects a PC running a terminal emulation program 9.2 Ethernet Port Pin Outs...
Page 49 - Main Power; Pin
RAID Subsystem DVA-12T | Installation Manual Pin Outs | en 49 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 Fig. 9.1 LAN Port Pin Outs 9.3 Main Power IEC-type receptacle. Pin Pin Name Pin Pin Name 1 LAN_TXP 5 N2 2 LAN_TXN 6 LAN_RXN 3 LAN_RXP 7 N1 4 N2 8 N1 Table 9.3 Ethernet Port Pin Outs
Page 51 - Index; Numerics
RAID Subsystem DVA-12T | Installation Manual Index | en 51 Bosch Security Systems F.01U.027.798 | V1 | 2006.06 10 Index Numerics 2U bracket 13 A Accessories 47 Air Flow 45 Airflow 16 airflow clearance 16 Ambient Temperature 30 anti-static precautions 34 ASIC 7 Audible Alarm 21 , 31 audible alarm 14 ...