Page 3 - Safety instructions; Important Safeguards
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 3 – Safety instructions Important Safeguards 1. Read, Follow, and Retain Instructions – All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future reference. 2. ...
Page 4 - Grounding or Polarization; FCC & ICES Information
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 4 – Safety instructions (continued) 12. Grounding or Polarization – This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to ...
Page 5 - For Indoor Product
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 5 – Safety instructions (continued) For Indoor Product 1. Water and Moisture – Do not use this unit near water – for example, in a wet basement, in an unprotected outdoor installation, or in any area classified as a wet locati...
Page 6 - Safety Precautions; CAUTION
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 6 – Safety instructions (continued) Safety Precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICIN...
Page 7 - TABLE OF CONTENTS; Introduction
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 7 – TABLE OF CONTENTS Section Page 1 Introduction 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 System Description 9 . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 9 - System Description; To avoid damage to the electronic components, to avoid data loss,
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 9 – 1 Introduction 1.1 System Description The video system is a digital monitoring system with which video images can be saved on location in order to transmit and evaluate them anyplace you designate regardless of distance an...
Page 10 - Recommended Virus Scanners/Firewalls; Virus Scanners
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 10 – Introduction (continued) 1.3 Recommended Virus Scanners/Firewalls Windows XP embedded is the operating system of the video system. The use of a virus scanner and a firewall is recommended. Virus Scanners The following vir...
Page 12 - Guarantee
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 12 – Introduction (continued) 1.5 Laws/Norms/Guidelines Electromagnetic com- patibility (EMC) USA FCC Part 15, Class B EU EMC directive 89/336/EWG – Fault broadcast EN 61000–6–3 – Interference immunity DIN EN 50130–4To fulfill...
Page 13 - Computer Slots; internal hardware will void the system warranty.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 13 – 2 Computer Slots Installation of the internal hardware components of the computer may only be per- formed by the video system manufacturer. Any field configuration changes to the internal hardware will void the system war...
Page 14 - Quick installation; Switch all connected devices on.; Select this function to start the Assistant.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 14 – 3 Quick installation For information about the device connections, please see Chapter 2. 1. Connect the mouse and keyboard (put ferrite on the cables). 2. Plug the 26–pin D–sub plug of the grabber cable on the correspondi...
Page 15 - Logon as administrator; Next; then take you to Expert Configuration.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 15 – Quick installation (continued) Logon as administrator No. Name Description 1 Name Enter the name here. You have to logon in the video system with this name in the future to oper- ate the system.The user given here receive...
Page 16 - Display of the existing hardware; The existing video hardware is displayed in this dialog box.; Update
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 16 – Quick installation (continued) Display of the existing hardware The existing video hardware is displayed in this dialog box. No. Name Description 1 Grabber type: The built–in grabber type is displayed. Either MVTitan or M...
Page 17 - Changing the camera name; You can change the camera name in this dialog box.; Change camera name
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 17 – Quick installation (continued) Changing the camera name You can change the camera name in this dialog box. No. Name Description 1 Click on the camera whose name you wish to change. The selection is displayed in color. 2 C...
Page 18 - Select storage method; You can determine the following for each camera in this dialog box:; Setup
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 18 – Quick installation (continued) Select storage method You can determine the following for each camera in this dialog box: if a recording (storage of images) should take place and how many images per camera should be displa...
Page 19 - Images per second
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 19 – Quick installation (continued) 3 Images per second Enter the number of images per second that are to be recorded in the Images per second box. Note: The system checks the plausibility of the config- ured recording rate he...
Page 20 - Select the drive for storage and finish Basic Configuration.; In this dialog box, select the drive for storage of the image data.; Finish
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 20 – Quick installation (continued) Select the drive for storage and finish Basic Configuration. In this dialog box, select the drive for storage of the image data. No. Name Description 1 The List field contains all hard drive...
Page 21 - A ring archive is created for each camera (this can be overwritten).; able disk space: total number of cameras”. All selected system parti-
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 21 – Quick installation (continued) Note: When finishing Basic Configuration, the system proceeds according to the fol- lowing convention: A ring archive is created for each camera (this can be overwritten). The size of the ar...
Page 22 - Connections
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 22 – 4 Connections This section describes the following connections/installation: Grabber card MVTitan/MVSigma Ethernet/token ring ISDN controller Interface expansion card VSCom 200 H SCSI controller Monitor, keyboard, mouse E...
Page 23 - Grabber Card MVTitan; May only be executed by authorized trained personnel!; Grabberkarte
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 23 – Connections (continued) 4.1 Grabber Card MVTitan (max. 2) May only be executed by authorized trained personnel! – S2–1S2–2S2–3S2–4 –– J7J8 ––––––––––– S2–5S2–6S2–7S2–8 J5J6 Connector J11 Connector J9 J1 1 Pin Assignment c...
Page 25 - Grabber Card MVSigma; Video input termination
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 25 – Connections (continued) 4.2 Grabber Card MVSigma May only be executed by authorized trained personnel! Pin 123456789 10 11 121314151617181920212223242526 MVSigma grabber card 9 1 26 19 10 18 Pin assignment Assignment Colo...
Page 26 - Connection to a Token Ring or Ethernet Network
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 26 – Connections (continued) 4.3 Connection to a Token Ring or Ethernet Network May only be executed by authorized trained personnel! In addition to the Ethernet connection on–board, there is an optional to- ken ring card avai...
Page 28 - Connecting the ISDN Controller; video; ISDN socket TAE 8
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 28 – Connections (continued) 4.4 Connecting the ISDN Controller May only be executed by authorized trained personnel! The ISDN connection is established via a supplied adapter cable (with Western connector) to the S o interfac...
Page 29 - Connecting the VSCom 200 H (Interface Expansion); only use the VSCom 200 H PCI card.; Connecting External Hard Disks
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 29 – Connections (continued) 4.5 Connecting the VSCom 200 H (Interface Expansion) May only be executed by authorized trained personnel! Note: only use the VSCom 200 H PCI card. The interface expansion card is retrofitted as fo...
Page 30 - Connecting the Cameras; Note that one input is needed per B&W and CCVS camera and two inputs; ture; Switch off the computer to connect the cameras.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 30 – Connections (continued) 4.7 Connecting the Cameras Note that one input is needed per B&W and CCVS camera and two inputs per Y/C camera. 26–pin connector plug video system video system V1V2 V8 V1V2 V4 MVTitan MVTitan M...
Page 31 - Connecting the V–DOG and Tamper Contact; WD; V–DOG
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 31 – Connections (continued) 4.8 Connecting the V–DOG and Tamper Contact May only be executed by authorized trained personnel! The module is used to monitor the tamper contact and power supply of the power unit. For signaling,...
Page 32 - Connecting the Software Dongle and; PRN; Connecting a Fault Indicator
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 32 – Connections (continued) 4.9 Connecting the Software Dongle and the Printer The programs are protected against unauthorized use by a dongle. The system cannot be operated without this dongle. The dongle must be con- nected...
Page 33 - Connecting the ATM via the Interface Processor (Serial); video system
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 33 – Connections (continued) 4.11 Connecting the ATM via the Interface Processor (Serial) A maximum of 4 automatic teller machines or three automatic teller ma- chines and 1 access control system can be connected to the video ...
Page 34 - Connection
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 34 – Connections (continued) Method 2: Problem:The automatic teller machines (ATMs) are located further away from the videosystem. The distance between the video system and interface processor and be-tween the interface proces...
Page 35 - Interface
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 35 – Connections (continued) Method 3: Problem:The automatic teller machines (ATMs) are located further away from the videosystem. The distance between the video system and interface processor and be-tween the interface proces...
Page 36 - Connecting the Barcode Reader
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 36 – Connections (continued) 4.12 Connecting the Barcode Reader 4.12.1 Barcode Reader V3300–N Only the barcode readers listed below should be used. With other types of barcode readers, you must check whether their protocol mat...
Page 38 - Connecting Foyer Card Reader MINITER RS 485
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 38 – Connections (continued) 4.13 Connecting Foyer Card Reader MINITER RS 485 The foyer card reader MINITER RS 485 is connected via a serial inter- face. A maximum of four foyer card readers can be connected in series. The foy...
Page 41 - Connecting Radio Clock DCF 77
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 41 – Connections (continued) 4.14 Connecting Radio Clock DCF 77 May only be executed by authorized trained personnel! The connection must be made to a serial interface.Note: Only the radio clock NeoClock DCF 77 should be used....
Page 43 - Web Connection for Access Via Browser; Wide Web Publishing service must be deactivated.; Activating/deactivating the Web application:; Double–click the ”Administrative Tools” icon.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 43 – Connections (continued) 4.15 Web Connection for Access Via Browser May only be executed by authorized trained personnel! The master disk contains the preinstalled Web application for accessing the image archive via the br...
Page 44 - Connecting a Modem
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 44 – Connections (continued) 4.16 Connecting a Modem May only be executed by authorized trained personnel! You must have administrator rights to carry out the following steps: 4.16.1 Selecting and Installing the Modem Notes fo...
Page 46 - Connecting AutoDome/SAE–Dome; Connecting AutoDome; Connecting AutoDome via matrix; Videosystem
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 46 – Connections (continued) 4.17 Connecting AutoDome/SAE–Dome Connecting AutoDome RS 232 RS 232/BiPhase converter COM x video system LTC 8780 or LTC 8786 BiPhase AutoDome LTC 8569 or LTC 8570 LTC matrix code merger BiPhase Bi...
Page 47 - Connecting SAE Dome with V3032 Biphase interface
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 47 – Connections (continued) Connecting SAE Dome directly RS 232 RS 232/RS 485 converter COM x video system i.e. LNL–108 A SAE Dome RS 485 Connecting SAE Dome with V3032 Biphase interface RS 232 RS 232/BiPhase converter COM x ...
Page 48 - Connecting a Security System; The video system is connected to a SecSys via an RS 232 interface at; link. To do this change the jumpers J1 and J2.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 48 – Connections (continued) 4.18 Connecting a Security System 4.18.1 General remarks The video system is connected to a SecSys via an RS 232 interface at COM x, e. g. by connecting an interface converter OVS in between. RS 23...
Page 49 - Connector assignment for OPTO; For power supply of 12 V/24 V; OVS
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 49 – Connections (continued) Jumper assignment for interface converter OVS Variant 1: 123 123 123 123 C3: Pin 2 = transmitter line Pin 3 = receiver line C3: Pin 2 = receiver line Pin 3 = transmitter line J2 J1 J2 J1 Connector ...
Page 50 - COM 1 to COM 3
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 50 – Connections (continued) 4.18.2 Connecting to NZ 500 (20 mA) video system OVS SDI+SDI–SDO+SDO– C3 OPTO COM x 9561 NZ 500 SU 500 Range max. 1000 m Only connect shield to NZ 500. Installation cable J–Y (St) Y 2x2x0,6 SU 500:...
Page 51 - SMA; GOM
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 51 – Connections (continued) 4.18.4 Connecting to AZ 1010/NZ 1008 V.24 Connection to AZ 1010/NZ 1008 AZ 1010/NZ 1008 SDI0 VSDO 235 Connection to the AZ 1010/NZ 1008 must be programmed at the center SMA S 3A S 3B B2 B1 V1 1 2 3...
Page 52 - Connection to interface 2 is possible.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 52 – Connections (continued) 4.18.5 Connecting to NZ 1012 V.24 connection to NZ 1012 Dip–Fix switches (S) and jumpers (V) on SSM NZ 1012 EAN SSM ZSN S3 S2S0 V4 V2 Software versions: 18508.0 A8.1 18508.1 A8.1 SDI0 VSDO Note: Co...
Page 57 - TESP; ÜSS
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 57 – Connections (continued) 4.18.11 Connecting to UGM 2020 20 mA connection to UGM 2020 or TESP (by telephony) TESP SGK EPC/EPC2 Software versions: SGKUGM DLA0DLB0DLA1DLB1 from EAPS–4 Jumper 1 – 4 open EAPS–5 OVS C3 OPTO 1695...
Page 59 - XP Administration; Changing from video system to XP administrator level; May only be executed by authorized personnel!; Log on as Windows
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 59 – 5 XP Administration 5.1 Changing from video system to XP administrator level May only be executed by authorized personnel! Proceed as follows in order to change from the video system to the XP administrator level. 1. End ...
Page 60 - Configuration; with the following configuration possibility:; Basic configuration with the wizard; online; , that is, directly in the system. For this call up the online help; Basic configuration; For more information on this, please see Section 3.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 60 – 6 Configuration If you are starting the video system for the first time, a dialog box appears with the following configuration possibility: Basic configuration with the wizard The basic configuration is intended for inexp...
Page 61 - Standard configuration (expert configuration); Configuration Drives; update
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 61 – Configuration (continued) 6.2 Standard configuration (expert configuration) 6.2.1 Configuration Drives (Database/drives menu) This dialog box shows you an overview of the hard drives and network drives available. No. Name...
Page 63 - are stored in the archives.; New
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 63 – Configuration (continued) 6.2.2 Configuration Archives (Database/archives menu) The archives presented in the overview box are located on the activated drives. The archives partition the drives into individual areas so th...
Page 65 - Accept
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 65 – Configuration (continued) Used The available memory is indicated. If the total of all configured archives exceeds 90% of the entire avail- able memory, a message appears. A reserve of at least 10% must be remain. 8 Memory...
Page 66 - Click once more for deactivation.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 66 – Configuration (continued) 6.2.3 Configuration of hardware connections (Hardware/connections menu) You can set–up numerous hardware options in this dialog box. Select the hard- ware either by clicking on the arrow pointing...
Page 68 - Type
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 68 – Configuration (continued) 6.2.4 Configuration of automatic teller machine (option) (Hardware/automatic teller machine menu) A maximum of 4 automatic teller machines each with 2 alarm inputs can be con- nected (must be act...
Page 69 - These inputs need to be configured as detectors.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 69 – Configuration (continued) 6.2.5 Configuration of the foyer card reader inputs (option) (Hardware/foyer card reader/inputs menu) A maximum of 4 foyer card readers can be connected, with each foyer card reader supporting on...
Page 70 - Foyer card reader time controlled
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 70 – Configuration (continued) 5 Foyer card reader time controlled Activate Foyer card reader time controlled and implement the following settings. 6 Default setting Click on the arrow pointing downwards in the De- fault setti...
Page 71 - reader must be set to “Foyer–card reader automatic.”; Entering lockouts
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 71 – Configuration (continued) 6.2.6 Configuration of the foyer–card reader lockouts (option) (Hardware/foyer card reader/lockouts menu) In this dialog box it is possible to lockout certain bank routing codes, i.e. EC cards th...
Page 72 - Deleting lockouts; Delete; all
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 72 – Configuration (continued) Deleting lockouts No . Name Description 3 Locked bank reference numbers Select the lockout you wish to delete from the list box. 4 Delete Click on Delete . The lockout is deleted. 5 Accept Click ...
Page 74 - Sys inputs to be assigned to each video system input.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 74 – Configuration (continued) 6.2.8 Configuration of security system inputs for Bosch D9000 Series (option) (Hardware/SecSys inputs menu) The serial connection of a Bosch D9000 Series SecSys allows for many Sec- Sys inputs to...
Page 75 - OK
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 75 – Configuration (continued) 5 “Assignment of ad- dresses” dialog box Select the SecSys addresses that you would like to assign to the input and click OK . The address is assigned to the input. The address is not assigned to...
Page 76 - tem addresses can also be assigned to any input type.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 76 – Configuration (continued) 6.2.9 Configuration of security system inputs for Bosch alarm systems – excluding D9000 Series (option) (Hardware/SecSys inputs menu) The serial connection of a SecSys allows up to 16 input types...
Page 78 - Function must be activated under Hardware/Connections.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 78 – Configuration (continued) 6.2.10 Configuration of alarm simulation (Hardware/alarm simulation menu) The video system supports 4 alarm inputs, which can be simulated for triggering test alarms. Note: Function must be activ...
Page 79 - the video system. A maximum of 32 virtual detectors is available.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 79 – Configuration (continued) 6.2.11 Configuration of virtual detectors (Hardware/virtual detector menu) The virtual detectors offer the same functionalities as the other detectors in the system. They provide inputs that can ...
Page 80 - The COM interface provides the following functions:; search dialog in the image archive.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 80 – Configuration (continued) Note: External software can communicate with the virtual detectors via aCOM interface (COM stands for Component Object Model).For a simple connection, please see a type library (VirtualInputs.tlb...
Page 81 - inputs can be connected to each MVSigma grabber card. A maximum of 2
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 81 – Configuration (continued) 6.2.12 Configuration of detector inputs (Hardware/Frame grabber/Detector menu With this dialog box you can activate and deactivate the contact inputs of the grabber card and select the stable sta...
Page 83 - which camera type it should be.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 83 – Configuration (continued) 6.2.13 Configuration of cameras (Hardware/Frame grabber/camera menu) With this dialog box you can select which camera you would like to activate and which camera type it should be. A maximum of 8...
Page 85 - Image settings for all camera types; Implement the setting for each camera as required.; Image settings
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 85 – Configuration (continued) Image settings for all camera types Implement the setting for each camera as required. No. Name Description 1 Image settings Click on Image settings . 2 Image properties Set the brightness, contr...
Page 86 - Set the monitoring area for the sensor camera (movement detection); Motion detection
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 86 – Configuration (continued) Set the monitoring area for the sensor camera (movement detection) Implement the setting for each camera as required. No. Name Description 1 Motion detection Click on Motion detection . The entir...
Page 87 - Grid
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 87 – Configuration (continued) 4 Sensitivity Change the sensitivity if the results of the movement detection are not satisfactory. high The sensitivity is higher; i.e. smaller texture changes (outlines, brightness, movement) a...
Page 88 - Set dome cameras; Dome settings
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 88 – Configuration (continued) Set dome cameras Implement the setting for each camera as required. No. Name Description 1 Dome settings Click on the Dome settings tab. Creating interface settings 2 Interface The settings for t...
Page 91 - of 2 MVTitan can be installed.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 91 – Configuration (continued) 6.2.14 Configuring relays (Hardware/Frame grabber/Relays menu) A maximum of 4 or 8 relay outputs can be connected to each MVTitan grabber card. With the MVSigma grabber card, no relays can be con...
Page 92 - A maximum of 16 IP cameras (network cameras) can be connected. The IP
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 92 – Configuration (continued) 6.2.15 Configuring IP cameras (Hardware/IP cameras menu) A maximum of 16 IP cameras (network cameras) can be connected. The IP cameras can also be connected to the available cameras through Frame...
Page 95 - You have to assign a time period to a job in the; Job Activations
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 95 – Configuration (continued) 4 Time interval The times (from ... to) for the selected weekdays, holidays and special dates can be entered here. New A new time can be entered. Edit An existing time can be changed. Delete Dele...
Page 96 - Name
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 96 – Configuration (continued) 6.2.17 Configuration of the ISDN connections (option) (Connections/ISDN menu) In this menu, define your own user station (local computer) and the remote stations so that you are able to establish...
Page 98 - network—a two–way connection should be connected.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 98 – Configuration (continued) 6.2.18 Configuring network connections (Connections/network menu) In this dialog box you can determine the video systems to which—via the network—a two–way connection should be connected. Note: F...
Page 100 - modem—a two–way connection should be connected.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 100 – Configuration (continued) 6.2.19 Configuring modem connections (Connections/modem menu) In this dialog box you can determine the video systems to which—via the modem—a two–way connection should be connected. In order to ...
Page 101 - Modem
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 101 – Configuration (continued) 4 Modem Select the connected modem in the Modem list box. 5 Password Click Password in order to change the RAS password for incoming calls. 6 Accept Click on Accept . If you have made incorrect ...
Page 102 - variable alarm triggers and cameras.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 102 – Configuration (continued) 6.2.20 Configuring storage job macros (Job macros/save menu) Job macros, e.g. saving images automatically (so–called storage job macros), define sequences (jobs) that should either run continuou...
Page 103 - If the job macro is assigned to various cameras in the; Job; menu, all images will be stored in a common archive.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 103 – Configuration (continued) 6 Total duration Activate the corresponding option As long as input status unchanged – if recording (with possible pauses) should be repeated as long as the input status of the alarm input exist...
Page 104 - be used for variable alarm triggers and cameras.; Job activation; Activate the; checkbox in the
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 104 – Configuration (continued) 6.2.21 Configuring alarm transmission job macro (Job macros/alarm transmission menu) Job macros define sequences (jobs) that should either run continuously or when an alarm is triggered. These j...
Page 105 - Configuring an alarm transmission job macro:
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 105 – Configuration (continued) Configuring an alarm transmission job macro: No. Name Description 1 New Creates a new transmission job macro.Click on New and enter the name in the input box. 2 Delete Deletes an existing transm...
Page 106 - User
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 106 – Configuration (continued) 7 Authorization level Select the authorization level. This job macro will only be available to the user with the authorization level selected. Note: The name and connection password for the auth...
Page 108 - Configuring a backup job macro:; Note
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 108 – Configuration (continued) Configuring a backup job macro: No. Name Description 1 New Creates a new backup job macro.Click on New and enter the name in the input box. 2 Delete Deletes an existing backup job macro.Select a...
Page 110 - Camera control
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 110 – Configuration (continued) 6 Trigger Select the triggering criteria that are to trigger the job activation. Alarm The job is activated as soon as the alarm input is triggered. Stby The job is activated as long as the inpu...
Page 112 - what the user is allowed to do in the system. The
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 112 – Configuration (continued) 6.2.24 Configuration of authorization levels (User management/authorization levels menu) You can create different authorization groups in this menu if you have adminis- trator rights. These so–c...
Page 114 - the password of the authorization levels is evaluated.; You should definitely protect the; Administrator; authorization
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 114 – Configuration (continued) 6.2.25 Configuration of the users (User management/user menu) To protect access to system components and data, operating procedures can only be carried out by logged–on users. Each user is assig...
Page 116 - the image archive and for an automatic disconnection.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 116 – Configuration (continued) 6.2.26 Configuration of options (Settings/options menu) This dialog box enables you to implement optional settings for the live image, the image archive and for an automatic disconnection. No. N...
Page 117 - browser access, or encoding for network connections.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 117 – Configuration (continued) 6.2.27 Configuration of security settings (Settings/security menu) You have the option of implementing security settings in this dialog box, e.g. browser access, or encoding for network connecti...
Page 119 - Assigning an audio signal to a connection:
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 119 – Configuration (continued) 6.2.28 Configuration of audio signals (Settings/audio signals menu) In this dialog box, you can allocate different audio signals to incoming mes- sages from network / modem and ISDN connections....
Page 120 - Deleting an audio signal:; Reference
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 120 – Configuration (continued) Deleting an audio signal: No. Name Description 1 Incoming connections Select the connection whose audio signal you wish to delete. 3 Reference The wav file is displayed to you in the Reference t...
Page 121 - the hardware dongle extension file.; Loading a new dongle file:
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 121 – Configuration (continued) 6.2.29 Configuration of the dongle (Settings/dongle menu) In this dialog field, you can see the serial and job numbers, the approved sys- tem performance features and the approved status of the ...
Page 122 - This dialog box contains the following options:; Start
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 122 – Configuration (continued) 6.2.30 Administration configuration (Administration menu) This dialog box contains the following options: No. Name Description 1 Configuration data Save The configuration can be saved on the net...
Page 123 - Upload
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 123 – Configuration (continued) 4 Upload of the holiday program You have the option here to adapt the holidays for the time program according to specific countries. The adjustment must be made in the Holidays.xml file. Upload ...
Page 124 - Startup
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 124 – 7 Startup Proceed as follows to start up the computer: Switch on the PC Check ISDN connection Check grabber driver Program system, perform system test Storing reference images Connecting the System Components Activating ...
Page 125 - Connecting the System Components; General requirements
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 125 – Startup (continued) 7.1 Connecting the System Components See Section 4. 7.2 Activating External Hard Disks External hard disks must be activated before starting up the PC. 7.3 Switching On the PC (Startup) 1. Switch on t...
Page 126 - Checking the Optional Network Connection
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 126 – Startup (continued) 7.5 Checking the Optional Network Connection Networking details The following details are required from the network operator for starting up and checking the network: IP address Subnet mask (Gateway) ...
Page 127 - Checking the Grabber Driver
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 127 – Startup (continued) 7.6 Checking the Grabber Driver Make sure the grabber driver has started. 1. Start up your computer as far as the live image. 2. Exit the video system as the Administrator. 3. Select ”Start → Control ...
Page 128 - Checking the Optional ATM Connection
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 128 – Startup (continued) 7.8 Checking the Optional ATM Connection The data telegram between the video system and ATM can be checked using the ”Hyper Terminal” program in Windows XP. Start the program via the ”Start → All Prog...
Page 129 - Checking the Optional Web Connection
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 129 – Startup (continued) 7.9 Checking the Optional Web Connection Check whether access can be obtained after activating the web applica- tion whether access can actually occur. Proceed as follows: 1. Start the web browser (In...
Page 130 - Fault Indication/Correction; Fault
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 130 – 8 Fault Indication/Correction This section contains notes on faults that may occur when first starting up or duringoperation.If you cannot determine the cause of the fault, please contact ”Product ServiceVideo” of the vi...
Page 131 - Maintenance and Service; Maintenance Tasks to be Carried Out
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 131 – 9 Maintenance and Service 9.1 Maintenance Tasks to be Carried Out Perform the following maintenance tasks: On the video system itself: – Check all cable connections are secure – Check the fan and clean it if necessary – ...
Page 132 - The user is responsible for:; Software update; Software installation is carried out by the Windows
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 132 – Maintenance and Service (continued) Attention: All work carried out on the system that can interfere with recording may only be carried out after consulting the customer. With regard to UVV–re- lated equipment (UVV = Ger...
Page 133 - Maintenance and Service; Error Forwarding; With ”net send”: rem Send messages to other computers on the network; Sending a Message in the Windows Network Using ”net send”
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 133 – Maintenance and Service (continued) 9.3 Error Forwarding Three methods are pre–configured and provided as examples. The ”er- ror_forwarding.cmd” file contains calls for all methods.”error_forwarding.cmd”: With ”net send”...
Page 135 - Troubleshooting
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 135 – Maintenance and Service (continued) 9.4 Troubleshooting The following faults have to be rectified if necessary: Counter light If recordings show impairment due to counter light, either block out the light source, e.g. th...
Page 136 - Technical data; Video System in 19” Housing
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 136 – 10 Technical data Video System in 19” Housing Operating system Windows XP Hard disk 120 GB minimum RAM 256 MB DDR Video AGP (on–board) Network Ethernet (on–board) Sound on–board Connections (on rear) see Section 2 Expans...
Page 137 - Technical Data
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 137 – Technical Data (continued) Grabber card MVTitan max. 2x Video inputs 16 Contact inputs 16 (either N/C contact or N/O contact) Relay outputs 8 (or 7x output and 1x fault indicator for 1st grabber card) Compression rate Ca...
Page 139 - End user license agreement; You may; SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 139 – End user license agreement (continued) Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only tothe extent that such acti...
Page 140 - Notes
Installation Manual for DiBos Video System A5/11–2004 610–4.998.137.176 – 140 – Notes
Bosch BCC111
User Manual
Bosch Air 500
Installation Manual
Bosch RD ESELECT
User Manual
Bosch SHE43C75N
User Manual
Bosch WGB24600UC
User Manual
Bosch WGB246AXUC
User Manual
Bosch WMZPW20W
User Manual
Bosch WQB245AXUC
User Manual
Bosch WQB245B0UC
User Manual
Bosch WTZ27500UC
User Manual
Bosch WTZPA20UC
User Manual