Bosch 8555 - Manuals

LTC 8555 Series | Instruction Manual | FCC & ICES Information EN | 3 Bosch Security Systems | 29 August 2003 17. Damage Requiring Service - Unplug the unit from the outlet and refer servicing to qualified servicepersonnel under the following conditions: a. When the power supply cord or plug is d...

LTC 8555 Series | Instruction Manual | Safety Precautions EN | 4 Bosch Security Systems | 29 August 2003 Safety Precautions Attention: Installation should be performed byqualified service personnel only in accordancewith the National Electrical Code or applicablelocal codes. Power Disconnect. Units ...

9 TROUBLESHOOTING 9.1 General LTC 8555 Series | Instruction Manual | Troubleshooting EN | 28 Bosch Security Systems | 29 August 2003 PROBLEM No Power Indication LED Displaying flashing dashes Non-operating Key or LED digit Camera and Monitor numbers being displayed, butAllegiant system will not resp...

LTC 8555 Series | Instruction Manual | Safety Precautions EN | 5 Bosch Security Systems | 29 August 2003 Sicherheitshinweise Achtung: Die Installation darf nur vonqualifiziertem Wartungspersonal gemäß demNational Electrical Code oder den gültigenörtlichen Vorschriften durchgeführt werden. Abtrennen ...

LTC 8555 Series | Instruction Manual | Safety Precautions EN | 6 Bosch Security Systems | 29 August 2003 Veiligheidsmaatregelen Attentie: De installatie dient alleen te wordenuitgevoerd door gekwalificeerd servicepersoneelen in overeenstemming met de plaatselijkgeldende installatievoorschriften. Ond...

LTC 8555 Series | Instruction Manual | User Information EN | 26 Bosch Security Systems | 29 August 2003 NOTES:1. When using LTC 8900 systems, the access levels required for this setting are 1 to 63. 2. Password is required to change this setting. 7.7 Error Messages The keyboard is designed to emit a...

LTC 8555 Series | Instruction Manual | Safety Precautions EN | 7 Bosch Security Systems | 29 August 2003 Medidas de Segurança Atenção: A instalação deve ser efectuada por pessoal de assistência técnica qualificado, de acordo com o National Electrical Code (Normas de Electricidade Nacionais) ou a leg...

LTC 8555 Series | Instruction Manual | Contents EN | 8 Bosch Security Systems | 29 August 2003 Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FCC Information . . . . . . . . . . . . ....

LTC 8555 Series | Instruction Manual | User Information EN | 25 Bosch Security Systems | 29 August 2003 7.5.17 Programming a SalvoSwitching CameraSequence A SalvoSwitching® sequence allows specification of agroup of monitors that will switch together as asynchronized group. To program a salvo sequen...

LTC 8555 Series | Instruction Manual | Unpacking EN | 9 Bosch Security Systems | 29 August 2003 1 UNPACKING This electronic equipment should be unpacked andhandled carefully. Check for the following items: • LTC 8555 Series Keyboard • 3 m (10 ft) Data/power cable with 6-pin connectors,p/n 303 0239 0...

LTC 8555 Series | Instruction Manual | Installation EN | 10 Bosch Security Systems | 29 August 2003 4 DESCRIPTION The LTC 8555 Series Keyboard is the primaryoperator interface to the Allegiant Series of VideoMatrix Switcher/Controllers. These keyboards provideaccess to system switching operations, p...

LTC 8555 Series | Instruction Manual | User Information EN | 23 Bosch Security Systems | 29 August 2003 7.5.12 Load/Clear a Sequence To load a previously programmed sequence so it can berun on your monitor, press SEQUENCE, enter thedesired sequence number (1 to 60 for most Allegiantmodels, or 1 to 2...

LTC 8555 Series | Instruction Manual | User Information EN | 22 Bosch Security Systems | 29 August 2003 To turn off an auxiliary function of a remote cameradevice, press OFF, enter the number of the auxiliary tobe deactivated, then press ENTER. With AutoDome cameras, auxiliary commands are usedto ac...

LTC 8555 Series | Instruction Manual | Installation EN | 12 Bosch Security Systems | 29 August 2003 Figure 1: Typical Configuration using supplied data/power cable Figure 2: Typical Configuration using optional LTC 8558/00 cable For connections beyond 30 m (100 ft), the LTC 8557 Series Remote Hookup...

LTC 8555 Series | Instruction Manual | User Information EN | 21 Bosch Security Systems | 29 August 2003 7.5 Keyboard Operating Instructions 7.5.1 Camera Selection Enter a valid camera number via the numeric keypadand press ENTER. The selected camera then appears onthe monitor currently controlled by...

LTC 8555 Series | Instruction Manual | User Information EN | 20 Bosch Security Systems | 29 August 2003 7 USER INFORMATION 7.1 General The Allegiant system is factory-supplied with varioususer-selectable features set to their default states (themain Allegiant system Installation Manual containscompl...

The larger Allegiant models support Keyboard Expander accessory units. These accessory units are used withLTC 8557 Series Remote Hookup Kit, to provide additional keyboard connections to the system, as shown inFIGURE 5. Figure 5: Configuration using LTC 8714 Keyboard Expander unit (Refer also to Ins...

LTC 8555 Series | Instruction Manual | Keyboard Controls EN | 19 Bosch Security Systems | 29 August 2003 5.3.6 Login Feature When Using RS-232 ModelKeyboards The Allegiant’s keyboard login feature is not affected byuse of RS-232 keyboards. If desired, this feature can beenabled to provide additional...

LTC 8555 Series | Instruction Manual | Installation EN | 15 Bosch Security Systems | 29 August 2003 If using the LTC 8059 Master Control Software, whileonline, select the Command Script tab and enter thescript for your connection type exactly as it appears inthe table below: After the script has bee...

LTC 8555 Series | Instruction Manual | Installation EN | 16 Bosch Security Systems | 29 August 2003 5.3.4 Modem Interface Information When Using RS-232 Model Keyboards RS-232 model keyboards can be connected to an Allegiant via dial-up modem link. The keyboard supports arudimentary ability to dial a...