Bosch 5000 IP - Manuals

DINION capture 5000 IP Safety | en 7 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1 Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in...

8 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before opera...

DINION capture 5000 IP Safety | en 9 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8. Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord plug is the main power disconnect device for switching off the v...

DINION capture 5000 IP Safety | en 11 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.3 Important notices All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building. If it ...

12 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. The Exposure Hazard Value for the product (ratio of the Exposure level to the Exposure limit) is up to 1.8 at a test distance of 200 mm or 8 inches. The Hazard Distance (distance beyond which the p...

DINION capture 5000 IP Safety | en 13 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use pro...

14 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. Power lines: An outdoor system should not be located in the vicinity of overhead power lines, electrical lights, or power circuits, or where it may contact such power lines or circuits. When instal...

DINION capture 5000 IP Safety | en 15 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.4 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules . Operation is subject to the following conditions: – t...

16 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. – cet appareil ne peut pas provoquer d'interférence nuisible et – cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient inf...

DINION capture 5000 IP Safety | en 17 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.5 Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. T...

18 en | Description DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 2 Description The DINION capture is a specialty camera designed to capture consistent, high-quality images of vehicle license plates. Available in IP and analog versions, it is ideal for monit...

DINION capture 5000 IP Installing the DINION capture | en 19 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3 Installing the DINION capture This section provides instructions for mounting and wiring the DINION capture. 3.1 Determining the Range The DINION capture has a recommended ...

20 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. Table 3.1 Ranges for DINION capture 5000 IP Imagers 3.2 Determining the Angle The maximum mounting angle of the license plate camera to the car is 40° for speeds up to 160 km...

DINION capture 5000 IP Installing the DINION capture | en 21 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Figure 3.1 Recommended Vertical and Horizontal Mounting Angle If the maximum range is exceeded, then the letters become smaller and more difficult to read. At the maximum ran...

22 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. should be anchored in concrete or welded to a steel backer plate. Refer to the MBE Mounts and Adapters Installation Guide for more details about attaching the bracket to an M...

24 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 3.4 Preparing the Wiring The DINION capture 5000 IP is pre-wired with a 2-m long power input lead and 10/100 Ethernet cable with a male RJ45 connection. The DINION capture 50...

DINION capture 5000 IP Installing the DINION capture | en 25 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3.4.1 Power Input Connections A voltage regulator circuit allows for DC or AC operation between 11-30 VDC and 24 VAC. It also provides protection from voltage surges, transie...

26 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 3.5 Making the Connections The easiest way to connect the cables is as follows: 1. Bring the building connections through the surface cable hole so that they hang clear. 2. C...

DINION capture 5000 IP Installing the DINION capture | en 27 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3.6 Connecting to a Coax Cable You can temporarily connect the DINION capture 5000 IP to a monitor via a coax cable to view the transmitted image for setup and testing purpos...

28 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 3. Connect the other end of the coax cable to a monitor. 4. Ensure that power is restored to the imager. 5. Press and hold the center key (item 2) for approximately two secon...

DINION capture 5000 IP Installing the DINION capture | en 29 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1. Remove the back panel of the DINION capture 5000 IP. Refer to Section 3.6 Connecting to a Coax Cable, page 27 for instructions. 2. Slide the SD card into the slot, located...

30 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 1. Remove the back panel. Refer to Section 3.6 Connecting to a Coax Cable, page 27 for instructions. 2. Locate the reset button, towards the center of the imager. 3. With the...

DINION capture 5000 IP Installing the DINION capture | en 31 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Mode Details Mode 2 (FullSun) is two (2) gain points less than the normal mode, by default. You can modify both mode settings as needed in order to provide the desired image ...

32 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 3. Navigate to the Livepage for the camera (refer to Section 6 Operation via the browser, page 42 ) and observe the Input 1 symbol. 4. Slowly turn the potentiometer counter-c...

DINION capture 5000 IP Configuration | en 33 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 4 Configuration Configuration of the DINION capture 5000 IP is carried out remotely via the network using a web browser. However, the license plate camera also has a set-up menu in which bas...

34 en | Configuration DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 4.2.1 Pre-Defined Modes There are six operating modes settings to make configuration easier. Normal and FullSun modes are pre-programmed to work with Automatic Mode Switching. Any one of the...

DINION capture 5000 IP Configuration | en 35 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 4.2.2 Lens Wizard submenu NOTICE! Lens is factory calibrated and does not require any adjustments. Item Selection Description Lens type Auto, Manual, DC- iris, Video Auto: automatically sele...

36 en | Configuration DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 4.2.3 Network submenu To operate the DINION capture 5000 IP in your network, a network-valid IP address must be assigned. The factory default IP address is 192.168.0.1. The new IP address, s...

DINION capture 5000 IP Browser connection | en 37 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5 Browser connection A computer with Microsoft Internet Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The camera is configur...

38 en | Browser connection DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 5.2 Establishing the connection The DINION capture 5000 IP must be assigned a valid IP address to operate on your network. The default address pre- set at the factory is 192.168.0.1 1. ...

DINION capture 5000 IP Browser connection | en 39 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5.4 Connecting to a hardware decoder A compatible H.264 hardware decoder with a monitor can be connected to the camera using an Ethernet network connection. Cameras are designed to auto...

40 en | Browser connection DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 5.5 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application title bar displays three items: LIVEPAGE , RECORDINGS , SETTINGS . Note...

DINION capture 5000 IP Browser connection | en 41 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5.5.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing the configuration menu is opened. All settings ar...

42 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 6 Operation via the browser 6.1 Livepage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser windo...

DINION capture 5000 IP Operation via the browser | en 43 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.1.2 Image selection View the image on a full screen. – Click a tab below the video image to switch between the different display streams of the camera image. Display Stamping V...

44 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 6.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed next to the camera image. The alarm symbol is for information and...

DINION capture 5000 IP Operation via the browser | en 45 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.1.5 Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive. – Click t...

46 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 6.1.8 Audio communication Audio can be sent and received via the Livepage if the active monitor and the remote station of the camera support audio. 1. Press and hold the F12 key ...

DINION capture 5000 IP Operation via the browser | en 47 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a storage medium has been selected)....

48 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. The time bar offers various options for navigation in and between sequences. – Change the time interval displayed by clicking the plus or minus icons. The display can span a rang...

DINION capture 5000 IP Basic Mode | en 49 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 7 Basic Mode 7.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic ...

50 en | Basic Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 7.2 Device Access 7.2.1 Camera name Assign a name to assist in identification. This name simplifies the management of multiple devices in more extensive systems. The name is used for remote ide...

52 en | Basic Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 7.4 Network Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make ...

DINION capture 5000 IP Basic Mode | en 53 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 7.5 Encoder Select a profile for encoding the video signal. Pre-programmed profiles are available that give priority to different parameters. When a profile is selected, its details are display...

54 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8 Advanced Mode 8.1 Advanced Mode menu tree The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mo...

56 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.2 General 8.2.1 Identification Camera ID Each device should be assigned a unique identifier that can be entered here as an additional means of identification. Camera name Assign a name to ...

DINION capture 5000 IP Advanced Mode | en 61 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.3 Web Interface 8.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necessary, replace the company's logo (top right) a...

62 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.3.2 LIVEPAGE Functions In this window, adapt the Livepage functions to meet your requirements. Choose from a variety of different options for displaying information and controls. 1. Mark t...

DINION capture 5000 IP Advanced Mode | en 63 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Allow snapshots Specify whether the icon for saving individual images should be displayed below the live image. Individual images can only be saved if this icon is visible. Allow local recor...

64 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.4 Camera 8.4.1 Mode Pre-defined modes The camera has six operating modes that can be selected in the Mode menu. Normal and FullSun modes have been pre- programmed to work with Automatic Mo...

DINION capture 5000 IP Advanced Mode | en 65 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5. Mode 5 Default settings. 6. Mode 6 Default settings. These modes can be adjusted according to personal preferences. The Mode menu allows selection and set-up of picture enhancement functi...

66 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.4.2 ALC ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate. A positive value is more useful for low-light conditions; a negative ...

68 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. Note: If Sensitivity up is active, some noise or spots may appear in the picture. This is normal camera behavior. Sensitivity up may cause some motion blur on moving objects. Gain AGC - the ...

DINION capture 5000 IP Advanced Mode | en 69 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 for changing light conditions. Includes all the benefits of 2X Dynamic. Auto black Auto black ON automatically increases the visibility of details even when scene contrast is less than full-...

70 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.4.5 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures). The camera simultaneously generates two H.264 video stre...

DINION capture 5000 IP Advanced Mode | en 73 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 combination of movement and image definition (focus). Alternatively, use the slider to set a value between 9 and 51. The value 9 represents the best image quality with, if necessary, a lower...

74 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.4.6 Encoder Streams Select H.264 Settings 1. Select the codec algorithm for streams 1 and 2. The following algorithms are available – H.264 BP+ bit-rate-limited – H.264 MP SD 2. Select the...

DINION capture 5000 IP Advanced Mode | en 75 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Note: Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream. JPEG stream Set the parameters for the M-JPEG st...

76 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. Note: The audio signals are sent in a separate data stream parallel to the video data, and so increase the network load. The audio data requires an additional bandwidth of approximately 80 k...

DINION capture 5000 IP Advanced Mode | en 77 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.4.9 Installer Menu Ticker bar Switches a ticker bar on the live image on or off. Camera buttons Disable the Camera buttons on the camera to prevent unauthorized change of the camera settin...

78 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.5 Recording Record the images from the camera to local storage media or to an appropriately configured iSCSI system. For long-term authoritative images use an appropriately sized iSCSI sys...

DINION capture 5000 IP Advanced Mode | en 79 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video Recording Manager manages all recording and no further settings can be configured here. Note: Activating...

82 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.5.2 Recording Profiles Define up to ten different recording profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the rec...

DINION capture 5000 IP Advanced Mode | en 83 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Alarm recording Select the Pre-alarm time from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interva...

84 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded in the event of an a...

DINION capture 5000 IP Advanced Mode | en 85 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Profile names To change the names of the recording profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recor...

86 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.6 Alarm 8.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The devi...

90 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.6.3 VCA configuration- Profiles Configure two profiles with different VCA configurations. Save profiles on your computer's hard drive and load saved profiles from there. This can be useful...

DINION capture 5000 IP Advanced Mode | en 91 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created...

96 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active. Schedules can be d...

DINION capture 5000 IP Advanced Mode | en 97 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.

98 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.6.5 VCA configuration - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event. As long as no trigger...

DINION capture 5000 IP Advanced Mode | en 99 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.6.6 Audio Alarm Create alarms based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or background noise, are avoided. Set...

DINION capture 5000 IP Advanced Mode | en 101 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example, the loc...

102 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.6.8 Alarm Task Editor Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. To edit this page, you should have prog...

DINION capture 5000 IP Advanced Mode | en 103 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.7 Interfaces 8.7.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the alarm is to be triggered by closing the contact. Select N.O. (Normally Ope...

104 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. configured to display the name next to the relay icon. (Do not use any special characters, for example &.) Trigger relay Click the button to switch the relay manually (for example, for ...

DINION capture 5000 IP Advanced Mode | en 105 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8 Network 8.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and...

DINION capture 5000 IP Advanced Mode | en 109 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8.2 Advanced The settings on this page are used to set advanced settings for the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Mak...

110 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. RTSP port If necessary, select a different port from the list for the exchange of the RTSP data. The standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to...

DINION capture 5000 IP Advanced Mode | en 111 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP addresses and the Internet Group Manageme...

112 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc. 8.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corresp...

DINION capture 5000 IP Advanced Mode | en 113 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8.5 Encryption If an encryption license is installed, this submenu gives access to the encryption parameters. 8.9 Service 8.9.1 Maintenance Firmware The camera functions and parameters ca...

DINION capture 5000 IP Advanced Mode | en 115 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 SSL certificate To work with an SSL connection, both sides of the connection must have the appropriate certificates. Upload one or more certificate files, one at a time, to the camera. 1. E...