Bosch 202 - Manuals

2 en | Safety High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. disconnect the cable system. This will prevent damage to the unit from lightning and power line surges. 7. Controls adjustment - Adjust only those controls specified in the oper...

High Performance LCD Monitors Safety | en 3 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 codes (Class 2 power levels). Do not ground the supply at the terminals or at the unit's power supply terminals. – If unsure of the type of power supply to use, contact your dea...

4 en | Safety High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. in the case of an authorization agreement, authority to operate the equipment. 1.2 Safety Precautions 1.3 Important Notices Accessories - Do not place this unit on an unstable s...

High Performance LCD Monitors Safety | en 5 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 stops, excessive force, or uneven surfaces may cause the cart/ unit combination to overturn. Mount the unit per the manufacturer's instructions. All-pole power switch - Incorpor...

6 en | Safety High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible r...

High Performance LCD Monitors Safety | en 7 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near th...

8 en | Safety High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limi...

High Performance LCD Monitors Safety | en 9 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 de la Commission fédérale des communications des États-Unis (FCC). Ces contraintes sont destinées à fournir une protection raisonnable contre les interférences nuisibles quand l...

High Performance LCD Monitors Safety | en 11 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 1.4 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Se...

12 en | Safety High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. Warranty and more information For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecuri...

High Performance LCD Monitors Unpacking | en 13 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 2 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the...

14 en | Unpacking High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 2.2 Exploded View Figure 2.1 Front Panel UML-202 Figure 2.2 Front Panel UML-172 and UML-192 Number Button Description 1 Input Button Selects the signal to be displayed 2 Men...

16 en | Unpacking High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 2.3 Remote Control This section details the functions and the usage of the Bosch remote control. Button Function POWER Turns the power ON and OFF. SOURCE Selects the PC or V...

High Performance LCD Monitors Unpacking | en 17 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 2.4 Remote Control Battery Installation 1. Turn the remote over (buttons facing down) and push down on the cover and slide it off. 2. Insert two (2) new AAA alkaline batteri...

High Performance LCD Monitors Description | en 19 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 3 Description The Bosch High Performance Family of LCD monitors display PAL or NTSC standard color pictures in CCTV systems. Two (2) looping Composite Video BNC connector ...

20 en | Description High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 3.2 Power Model No. Rated Voltage Voltage Range Power at Rated Voltage Sync Format UML-172-90 120/230 VAC 50/60 Hz 100 to 240 V < 40 W NTSC/PAL UML-192-90 120/230 VAC 5...

High Performance LCD Monitors Installing the Monitor | en 21 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 4 Installing the Monitor This chapter outlines the procedures to install the UML-172-90, UML-192-90, or the UML-202-90 Series. A qualified service person should...

22 en | Installing the Monitor High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 4.2.2 Wall Mount Installation The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-LW-20B fixed wall mount or the UMM-LW-30B s...

High Performance LCD Monitors Installing the Monitor | en 23 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 Note: To select between AV1 and AV2, press Input (see Figure 2.1 , Item 1 or Figure 2.2 , Item 1) located on the front of the monitor. 4.4 Connecting the Y/C (S...

24 en | Installing the Monitor High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 4.6 Connecting the PC Signal to the Monitor There are three ways to connect the PC signal to the monitor; HDMI, DVI, and VGA. 4.6.1 HDMI The monitor can be conn...

High Performance LCD Monitors Installing the Monitor | en 25 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 4.7 Connecting an Alarm Trigger The monitor contains an alarm Trigger Input, the right-most input on the back panel, and an alarm relay cable. These components ...

High Performance LCD Monitors Installing the Monitor | en 27 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 4.8 Single / Multiple Monitor Configuration Figure 4.7 Single Monitor Configuration Figure 4.8 Multiple Monitor Configuration Number Description 1 Video Camera ...

High Performance LCD Monitors Navigating the Monitor | en 29 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 5 Navigating the Monitor 5.1 Navigating the Front Panel Use the front panel to make any necessary OSD adjustments to the UML-172-90, UML-192-90, or to the UML-2...

High Performance LCD Monitors Navigating the Monitor | en 31 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 5.3 On-screen Display Menus There are four (4) on-screen menus that allow you to customize your settings. Press the Menu button to access the OSD menu. 5.4 Cust...

32 en | Navigating the Monitor High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. Table 5.2 Custom Menu (PC Mode) Brightness 50 Contrast 50 :Move :Input :Menu Custom Submenu Definition Brightness Adjusts the brightness level for video perform...

High Performance LCD Monitors Navigating the Monitor | en 35 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 5.6 PIP Menu To access the PIP menu, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the PIP icon. Press...

36 en | Navigating the Monitor High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. 5.7 Setup Menu To access the Setup menu, press the Menu button on the front panel of the monitor, then press the left and right arrows to select the Setup icon....

High Performance LCD Monitors Navigating the Monitor | en 37 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 5.7.1 Configuring Alarm Relay Inputs The monitor allows you to connect an alarm relay cable from a device (camera or door) to the monitor, and then to configure...

High Performance LCD Monitors Navigating the Monitor | en 39 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 5.7.2 Configuring Auto Switching The Auto Switching feature allows the monitor to cycle the display of selected video inputs. Table 5.8 Auto Switching Menu Auto...

40 en | Navigating the Monitor High Performance LCD Monitors F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc. Selecting Input Sources for Auto Switching Use this menu to add or remove an input source from the Auto Switching cycle. Table 5.9 Auto Switching Menu – Input S...

High Performance LCD Monitors Power Management | en 41 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 6 Power Management These monitors feature a power management system to “power down” upon receipt of the display power management signaling (DPMS) from a DPMS video ca...

High Performance LCD Monitors Maintenance | en 43 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 7 Maintenance To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a soft lint-free cloth. Staining and discoloration may occur if l...

High Performance LCD Monitors TroubleShooting Guide | en 45 Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03 8 TroubleShooting Guide Problem Solution No image is displayed on screen – Check that the power cord of the monitor is securely connected into the wall outlet or...

D8125MUX | Operation and Installation Guide | 3.0 Installation 6 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 3.2 Programming 3.2.1 Powering the D5060 Turn on the D5060 by pressing and holding the [1] key until the unit beeps. To turn the unit off, press and hold the [#] and [*] keys simulta...

D8125MUX | Operation and Installation Guide | 3.0 Installation 8 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 Figure 6: D8125MUX Mounting Locations 1 1 1 - Module mounting location Figure 7: D8125MUX Wiring Diagram PERIPHERAL DEVICE WIRING ZONEX OUT 1 ZONEX IN 1 ZONEX OUT 2 ZONEX IN 2 ZONEX ...

D8125MUX | Operation and Installation Guide | 3.0 Installation . Bosch Security Systems, Inc. | 9/08 | F01U034973-02 9 Figure 8: Wiring the D8125MUX to Detection Systems Multiplex Points Table 4: D8125MUX Line Length + - + - + - + - POWER A MUX BUS A POWER B MUX BUS B D8125MUX 1 2 3 4 5 6 7 8 MUX BU...

D8125MUX | Operation and Installation Guide | 3.0 Installation 10 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 3.7 Installing a Multiplex Device 3.7.1 Adding Multiplex Devices to the Control Panel As shown in Table 6 , several types of multiplex devices are available. Each multiplex accessor...

D8125MUX | Operation and Installation Guide | 3.0 Installation . Bosch Security Systems, Inc. | 9/08 | F01U034973-02 11 Table 7: Point Conversion Table If Zonex 2 Pt. # is Program as If Zonex 2 Pt. # is Program as If Zonex 2 Pt. # is Program as If Zonex 2 Pt. # is Program as If Zonex 2 Pt. # is Prog...

D8125MUX | Operation and Installation Guide | 3.0 Installation 12 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 Table 8: DS7457i, DS7461i, and DS7465i Switch Settings When Using D8125MUX on Zonex 1 Point (Relay) Address Switch Number ( • = ON) 1 2 3 4 5 6 7 8 009 • • 010 • • 011 • • • 012 • •...

D8125MUX | Operation and Installation Guide | 3.0 Installation 14 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 Table 8: DS7457i, DS7461i, and DS7465i Switch Settings When Using D8125MUX on Zonex 1 (continued) Point (Relay) Address Switch Number ( • = ON) 1 2 3 4 5 6 7 8 111 • • • • • • 112 •...

D8125MUX | Operation and Installation Guide | 3.0 Installation 16 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 Table 9: DS7457i, DS7461i, and DS7465i Switch Settings When Using D8125MUX on Zonex 2 (continued) Zone (Point) Address Switch Number ( • = ON) 1 2 3 4 5 6 7 8 223 • • • • • 224 • • ...

D8125MUX | Operation and Installation Guide | 3.0 Installation 18 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 Table 10: DS7460i Switch Settings When Using D8125MUX (continued) Address Zone/Relay Switch Number ( • = ON) 1 2 3 4 5 6 7 8 189/190 • • • 191/192 • • • • 193/194 • • • 195/196 • • ...

D8125MUX | Operation and Installation Guide | 3.0 Installation . Bosch Security Systems, Inc. | 9/08 | F01U034973-02 19 3.10 MX250 Photoelectric Smoke Detectors and MXB2W Base or D7050 Photoelectric Smoke Detector and D7050-B6 Base 3.11 DS7460(i) Dual Input Multiplex Module The DS7460(i) reserves tw...

D8125MUX | Operation and Installation Guide | 3.0 Installation 20 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 3.12 DS7432 Eight Input Remote Module This device type reserves eight points on the multiplex bus. Each D8125MUX supports fifteen DS7432s on the D9412GV2, D9412G, D9412, and D9112 C...

D8125MUX | Operation and Installation Guide | 4.0 Testing the System . Bosch Security Systems, Inc. | 9/08 | F01U034973-02 21 Control the relay output on each DS7465 using any of the following control panel options: 4.3 Extra Multiplex Points Extra Points occur when the D8125MUX sends point transiti...

D8125MUX | Operation and Installation Guide | 5.0 Troubleshooting 22 Bosch Security Systems, Inc. | 10/09 | F01U034973-02 5.0 Troubleshooting Table 17: Troubleshooting Symptom Diagnosis Remedy Multiplex point is not connected to MUX bus. Check wiring. Verify that a multiplex point programmed for the...

D8125MUX | Operation and Installation Guide | 5.0 Troubleshooting EN | 23 Bosch Security Systems, Inc. | 9/08 | F01U034973-02 23 Table 17: Troubleshooting (continued) Symptom Diagnosis Remedy Short on Aux power, Terminal 3 or Zonex power, Terminal 24. Terminals 3 and 24 share a common circuit breake...