BMW 650i- Manuals

For your own safety Maintenance and repairs Advanced technology, e.g., the use of modernmaterials and high-performance electronics, re‐quires suitable maintenance and repair meth‐ods.Therefore, have this work performed only by aBMW center or a workshop that works accord‐ing to BMW repair procedures ...

erate your vehicle in another country or region,you may be required to adapt your vehicle tomeet different prevailing operating conditionsand homologation requirements. You shouldalso be aware of any applicable warranty limita‐tions or exclusions for such country or region. Insuch case, please conta...

At a glance These overviews of buttons, switches and displays are intended to familiarize you with yourvehicle. You will also become quickly acquainted with the available control concepts and options. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Cockpit All around the steering wheel 1 Opening and closing the rear win‐ dow   44 2 Open and close windows together   44 3 Open and close rear windows   43 4 Open and close front windows   43 5 Exterior mirror operation   59 6 Driver assistance systems* Active Blind Spot Detec‐tion*   98 Lane depar...

Instrument cluster 1 Fuel gauge   74 2 Speedometer3 Indicator/warning lamps   14 4 Tachometer   75 5 Engine oil temperature   75 6 External temperature   75 7 Electronic displays   16 8 Miles, trip miles   76 9 Clock   79 10 Reset miles   76 Indicator/warning lamps Instrument cluster The indicator a...

Instrument cluster, electronic displays 1 Symbols and messages, e.g., warnings   14 2 Range   74 3 Computer   76 4 Navigation display*   146 Service display   81 5 Selection list, e.g., radio   76 6 Transmission displays   73 Seite 16 16 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Cockpi...

All around the center console 1 All around the interior rearview mir‐ ror   18 2 Control Display   19 3 Glove compartment   132 4 Air vent   126 5 Hazard warning system   248 Central locking system   39 6 Radio   166 CD/multimedia   173 7 Automatic climate control   123 8 Controller with buttons   1...

All around the interior rearview mirror 1 Emergency Request*   248 2 Reading lamps*   87 3 Interior lamps   87 4 Indicator lamp, front passengerairbag*   90 Seite 18 18 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Cockpit

iDrive The concept The iDrive combines the functions of a multitudeof switches. Thus, these functions can be oper‐ated from a central location. Using the iDrive during a tripTo avoid becoming distracted and posing an unnecessary hazard to your vehicle's occu‐pants and to other road users, never atte...

3. Move in four directions. Buttons on controller Press the button Function MENU Open the main menu. RADIO Opens the Radio menu. CD Opens the CD/Multimediamenu. NAV Opens the Navigation mapview. TEL Opens the Telephonemenu. BACK Displays the previouspanel. OPTION Opens the Options menu. Operating co...

White arrows pointing to the left or right indicatethat additional panels can be opened. View of an opened menu When a menu is opened, it generally opens withthe panel that was last selected in that menu. Todisplay the first panel of a menu: ▷ Move the controller to the left repeatedlyuntil the firs...

4. Turn the controller until "Time/Date" is high‐lighted, and then press the controller. 5. Turn the controller until "Time:" is high‐lighted, and then press the controller. 6. Turn the controller to set the hours andpress the controller. 7. Turn the controller to set the minutes and...

Additional symbols Symbol Meaning Spoken instructions* are switchedoff. Request of the current vehicle posi‐tion*. Split screen* General information Additional information can be displayed on theright side of the split screen, e.g., informationfrom the computer.In the divided screen view, the so-cal...

Deleting the button assignments 1. Press buttons 1 and 8 simultaneously forapprox. five seconds. 2. "OK" Entering letters and numbers 1. Turn the controller: select letters or num‐bers. 2. Select additional letters or numbers ifneeded. 3. "OK": confirm the entry. Symbol Function Pres...

Voice activation system* The concept ▷ The voice activation system can be used tooperate functions by means of spoken com‐mands. ▷ Most menu items on the Control Display canbe voiced as commands. The systemprompts you to make your entries. ▷ Functions that can only be used when thevehicle is station...

Example: playing back a CD 1. Switch on the Entertainment sound outputif necessary. 2. Press the button on the steering wheel. 3. ›C D and multimedia‹The medium last played is played back. 4. Press the button on the steering wheel. 5. ›C D track ...‹ e.g., CD track 4. Setting the voice dialog You ca...

Integrated Owner's Manual in the vehicle The integrated Owner's Manual can be dis‐played on the Control Display. The equipmentand functions that are in the vehicle are descri‐bed therein. Components of the integrated Owner's Manual The integrated Owner's Manual consists ofthree parts, which offer va...

Opening and closing Remote control/key Buttons on the remote control 1 Unlocking2 Locking3 Trunk lid4 Panic mode*, headlamp courtesy delay fea‐ ture General information The vehicle is supplied with two remote controlswith keys.Every remote control contains a replaceablebattery.The settings called up...

New remote controls You can obtain new remote controls from yourservice center. Loss of the remote controls Lost remote controls can be blocked by yourservice center. Emergency detection of remote control It is possible to switch on the ignition or start theengine in situations such as the following...

2. "Profiles" 3. Select a profile. The profile that is opened is assigned to the re‐mote control currently in use. Renaming profiles 1. "Settings" 2. "Profiles"The current profile is selected. 3. Open "Options". 4. "Rename current profile" Resetting profiles T...

Display profile list during start The profile list can be displayed during eachstart for selecting the desired profile. 1. "Settings" 2. "Profiles" 3. Open "Options". 4. "Display user list at startup" Personal Profile settings The following functions and settings can ...

Operating from the inside Via the button for the central locking system. If the vehicle has been locked from inside, thefuel filler flap and the compartment in the centerarmrest remain unlocked.If an accident of a certain severity occurs, thecentral locking system unlocks automatically.The hazard wa...

Pinch hazard when moving back the seatIf this function is used, first make sure that the footwell behind the driver's seat is empty.Otherwise, people can be injured or objectsdamaged when the seat is moved back.◀ The adjustment procedure is interrupted: ▷ When a seat position switch is pressed. ▷ Wh...

Manual operation If an electrical malfunction occurs, lock or unlockthe vehicle using a key via the door lock on thedriver's door. Locking the doors and trunk lid at once* In some vehicle equipment versions, only thedriver's door can be locked via the door lock.To lock all doors and the trunk lid at...

▷ Compartment in the centerarmrest and trunk lid locked,arrow 1. ▷ Compartment in the centerarmrest and trunk lid un‐locked, arrow 2. Slide the switch into the arrow 1 position. There‐fore, the compartment in the center armrest andthe trunk lid are locked and decoupled from thecentral locking system...

Locking the vehicle* Press the button on the inside of the trunk lid.The vehicle is locked completely. Emergency unlocking* Pull the handle inside the cargo area.The trunk lid unlocks. Comfort Access* The concept The vehicle can be accessed without activatingthe remote control.All you need to do is ...

Switching off the alarm ▷ Unlock the vehicle using the remote control. ▷ With Comfort Access: If you are carrying theremote control with you, pull on the doorhandle. Indicator lamp on the interior rearview mirror ▷ The indicator lamp flashes briefly every2 seconds:The system is armed. ▷ The indicato...

wise, the closing action may not stop in certainsituations, e.g., if thin objects are present.◀ Window accessoriesDo not install any accessories in the range of movement of the windows; otherwise, thepinch protection system will be impaired.◀ Closing without the pinch protection system Danger of pin...

1 Convertible top tool2 Adapter3 Rear window tool Before closing 1. Open trunk lid, refer to page 40 . Depending on the reason for the defect, itmay be the case that the trunk lid cannot beopened. Then the convertible top cannot bemanually closed. 2. Remove the two large caps from the trim. Ifnecess...

Installation 1. Remove wind deflector from the protectivejacket and unfold it. 2. Press the upper and lower parts togetheruntil the latch engages. 3. Push out the right retaining pin until the latchengages and flip out the two rear retainingpins. 4. Install the wind deflector on the vehicle withthe ...

To release the two lateral retaining pins, pull thecorresponding handle forward a little and thempull it to the side. Folding up On the left side, pull the handle of the retainingpin on the wind deflector all the way back andrelease the latch. Fold in top and bottom part. Seite 52 52 Online Edition ...

Adjusting Sitting safely The ideal seating position can make a vital con‐tribution to relaxed, fatigue-free driving.The seating position plays an important role inan accident in combination with: ▷ Safety belts, refer to page 56 . ▷ Head restraints, refer to page 57 . ▷ Airbags, refer to page 88 . S...

3. Seat tilt. 4. Backrest tilt. Thigh support* Multifunctional seat* Adjust the position using the lever. Lumbar support* The curvature of the seat backrest can be ad‐justed in such a way that it supports the lumbarregion of the spine. The lower back and thespine are supported for upright posture. ▷...

Active seat* Active adjustment of the seat cushion's con‐tours reduces muscular tension and fatigue tohelp prevent lower back pain. Press the button. The LED lights up. Front seat heating* Switching on Press the button once for each temper‐ature level. The maximum temperature is reached whenthree LE...

Safety belts Seats with safety belt The vehicle has four seats, each of which isequipped with a safety belt. Notes Always make sure that safety belts are beingworn by all occupants before driving away.Although airbags enhance safety by providingadded protection, they are not a substitute forsafety b...

Front head restraints Correctly adjusted head restraint A correctly adjusted head restraint reduces therisk of injury to cervical vertebrae in the event ofan accident. Adjusting the head restraintCorrectly adjust the head restraints of all occupied seats; otherwise, there is an increasedrisk of inju...

Entering the rear Note Folding back and locking the backrestBefore driving away, fold back and lock the backrests; otherwise, an unexpected seatmovement may cause an accident.◀ Unlocking the backrest Pull the lever and fold the backrest forward. Changing the seat position To change the entry area: ▷...

The procedure stops when a switch for adjust‐ing the seat or one of the buttons is pressed. Safety mode 1. Close the driver's door or switch on the ig‐nition. 2. Press and hold the desired button 1 or 2 untilthe adjustment procedure is completed. Calling up of a seat position deactivated After a bri...

Possible up to approx. 15 mph/20 km/h.For example, this is advantageous ▷ In car washes. ▷ In narrow streets. ▷ For folding back mirrors that were foldedaway manually. Mirrors that were folded in are folded out auto‐matically at a speed of approx. 25 mph/40 km/h. Fold in the mirror in a car washBefo...

Transporting children safely The right place for children Note Children in the vehicleDo not leave children unattended in the vehicle; otherwise, they could endanger them‐selves and other persons, e.g., by opening thedoors.◀ Children should always be in the rear Accident research shows that the safe...

width again and do not call up a memory posi‐tion. Backrest width for the child seatBefore installing a child restraint fixing system in the front passenger seat, the backrestwidth must be opened completely. Do notchange the adjustment after this; otherwise, thestability of the child seat will be re...

Driving Start/Stop button The concept Pressing the Start/Stop buttonswitches the ignition on or off andstarts the engine.Automatic transmission*: the en‐gine starts if the brake is de‐ pressed when the Start/Stop button is pressed.Manual transmission: the engine starts if theclutch is depressed when...

Starting the engine General information Enclosed areasDo not let the engine run in enclosed areas; otherwise, breathing of exhaust fumesmay lead to loss of consciousness and death.The exhaust gases contain carbon monoxide, anodorless and colorless but highly toxic gas.◀ Unattended vehicleDo not leav...

Parking brake The concept The parking brake is primarily intended to pre‐vent the vehicle from rolling while parked; itbrakes the rear wheels.In cars with automatic transmission*:The parking brake can be set manually or auto‐matically: ▷ Manual: by pulling and pushing the switch. ▷ Automatic: by act...

Turn signal, high beams, headlamp flasher Turn signal Using turn signals Press the lever beyond the resistance point.To switch off manually, press the lever to the re‐sistance point. Unusually rapid flashing of the indicator lamp in‐dicates that a turn signal bulb has failed. Triple turn signal acti...

Switching off and brief wipe Press the wiper levers down.The lever automatically returns to its initial po‐sition when released. ▷ Brief wipe: press down once. ▷ To switch off normal wipe: press down once. ▷ To switch off fast wipe: press down twice. Rain sensor The concept The time between wipes is...

Windshield washer nozzles The washer jets are automatically heated*whenever the ignition is switched on. Fold-out position of the wipers Required when changing the wiper blades orunder frosty conditions, for example. 1. Switch off the ignition. 2. Under frosty conditions, ensure that thewiper blades...

Automatic transmission with Steptronic* Transmission positions D Drive, automatic position Position for normal vehicle operation. All for‐ward gears are available. R is Reverse Select only when the vehicle is stationary. N is Neutral Use in automatic car washes, for example. Thevehicle can roll.When...

Displays Instrument cluster At a glance 1 Fuel gauge2 Speedometer3 Indicator/warning lamps4 Tachometer5 Oil temperature 6 External temperature7 Electronic displays8 Miles, trip miles9 Clock10 Display/reset miles Fuel gauge The vehicle inclination maycause the display to vary.Notes on refueling, refe...

Displaying the cruising range 1. "Settings" 2. "Info display" 3. "Additional indicators" The range is displayed in the instrument cluster. Tachometer Always avoid engine speeds in the red warningfield. In this range, the fuel supply is interruptedto protect the engine. Engine...

The bar display for the current fuel consumptionis displayed in the instrument cluster. Energy recovery The energy of motion of the ve‐hicle is converted to electrical en‐ergy while coasting. The vehiclebattery is partially charged andfuel consumption can be low‐ered. Odometer and trip odometer ▷ Od...

Calling up information on the info display Press the computer button on the turn signallever.Information is displayed on the info display of theinstrument cluster. Information at a glance Repeatedly pressing the button on the turn sig‐nal lever calls up the following information on theinfo display: ...

Time of arrival* The estimated time of arrival isdisplayed if a destination is en‐tered in the navigation system*before the trip is started.The time must be correctly set. Speed limit Display of a speed limit which, when reached,should cause a warning to be issued.Renewed warning if the vehicle spee...

Resetting the fuel consumption or speed 1. "Vehicle Info" 2. "Onboard info" 3. "Cons." or "Speed" 4. "Yes" Gear shift indicator* The concept The system recommends the most fuel efficientgear in the current driving situation.Indicators to shift up or down are d...

1. "Settings" 2. "Control display" 3. "Brightness" 4. Turn the controller until the desired bright‐ness is set. 5. Press the controller. The setting is stored for the remote control cur‐rently in use.Depending on the light conditions, the bright‐ness control may not be clearl...

3. Open "Options". 4. "Last Service Request" Check Control The concept The Check Control system monitors functionsin the vehicle and notifies you of malfunctions inthe monitored systems.A Check Control message is displayed as acombination of indicator or warning lamps andtext message...

3. "Check Control" 4. Select the text message. Messages after trip completion Malfunctions indicated during a trip are dis‐played again after the ignition is switched off. Seite 83 83 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Reference Mobility Communication Entertainment Navig...

Lamps At a glance 1 Rear fog lamps*2 Front fog lamps*3 Automatic headlamp control / adaptive light control* / high-beam assistant* / welcomelamps / daytime running lights* 4 Lamps off / daytime running lights*5 Parking lamps / daytime running lights*6 Low beams / welcome lamps / high-beam assistant*...

The setting is stored for the remote control cur‐rently in use. Automatic headlamp control Switch position : the low beams are switchedon and off automatically, e.g., in tunnels, in twi‐light or if there is precipitation. The indicatorlamp in the instrument cluster lights up.A blue sky with the sun ...

Adaptive light control is malfunctioning or hasfailed. Have the system checked as soon as pos‐sible. High-beam Assistant* The concept When the low beams are switched on, this sys‐tem automatically switches the high beams onand off. The procedure is controlled by a sensoron the front of the interior ...

Camera The camera is located on the front of the interiorrearview mirror.Keep the area in front of the interior rearviewmirror clear. Fog lamps Front fog lamps* The parking lamps or low beams must beswitched on. Press the button. The green indicatorlamp lights up. If the automatic headlamp control, ...

Safety Airbags 1 Front airbag, driver2 Front airbag, front passenger 3 Side airbag4 Knee airbags Front airbags Front airbags help protect the driver and frontpassenger by responding to frontal impacts inwhich safety belts alone cannot provide ade‐quate restraint. Side airbags In a lateral impact, th...

▷ Make sure that the front passenger is sittingcorrectly, i.e., keeps his or her feet and legsin the footwell; otherwise, leg injuries canoccur if the front airbag is triggered. ▷ Do not place slip covers, seat cushions orother objects on the front passenger seatthat are not approved specifically fo...

Rollover protection system The concept The rollover protection system is activated dur‐ing an accident or a critical driving situation,when there is extreme tilt with respect to thelongitudinal axis or when there is loss of groundcontact. The safety frames located behind therear headrests extend wit...

system will operate properly. Reset the systemafter each correction of the tire inflation pres‐sure and after every tire or wheel change. System limits Sudden tire damageSudden serious tire damage caused by external influences cannot be indicated in ad‐vance.◀ The system does not operate correctly i...

4. Start the engine - do not drive away. 5. Reset the tire pressure using "Reset". 6. Drive away. The tires are shown in gray and "ResettingTPM..." is displayed.After driving for a few minutes, the set tire infla‐tion pressures are applied as set values. The re‐setting process is com...

main continuously illuminated. This sequencewill continue upon subsequent vehicle start-upsas long as the malfunction exists. When the mal‐function indicator is illuminated, the system maynot be able to detect or signal low tire pressureas intended. TPMS malfunctions may occur fora variety of reason...

1. Reduce your speed and stop cautiously.Avoid sudden braking and steering maneu‐vers. 2. Check whether the vehicle is fitted with reg‐ular tires* or run-flat tires*.Run-flat tires, refer to page 234 , are labeled with a circular symbol containing the lettersRSC marked on the tire sidewall. When a f...

Lane departure warning* The concept This system issues a warning at speeds aboveapprox. 40 mph/65 km/h if the vehicle is aboutto leave the lane on roads with lane markings.The steering wheel begins vibrating gently.The system does not provide a warning if theturn signal is set before leaving the lan...

Malfunctions Steering wheel vibration Frequent activation of the steering wheel vibra‐tion causes the system to overheat.This causes the lane departure warning to be‐come deactivated.Let the system cool and reactivate it by pressingthe button. Camera The camera is located on the front of the interio...

Warning If the turn signal is set while a vehicle is in thecritical zone, the steering wheel vibrates brieflyand the lamp in the mirror housing flashesbrightly.The warning stops when the turn signal isswitched off, or the other vehicle leaves the crit‐ical zone. System limits Personal responsibility...

Driving stability control systems Antilock Brake System ABS ABS prevents locking of the wheels during brak‐ing.The vehicle remains steerable even during fullbrake applications, thus increasing activesafety.ABS is operational every time you start the en‐gine. Brake assistant When you apply the brakes...

▷ When driving in slush or on uncleared,snow-covered roads. ▷ When rocking the vehicle or driving off indeep snow or on loose surfaces. ▷ When driving with snow chains. Adaptive Drive* The concept Adaptive Drive* includes the following systems: ▷ Dynamic Drive, refer to page 102 ▷ Dynamic Damping Co...

The rear wheels are turned to the same angle asthe front wheels.In critical situations, Integral Active Steering canspecifically steer the front and rear wheels tostabilize the vehicle before the driver intervenes,e.g., when braking where road conditions differon the left and right sides of the vehi...

To increase vehicle stability, activate DSC againas soon as possible. Activating DSC OFF Press and hold the button, but not lon‐ger than approx. 10 seconds, until the indicator lamp for the DSC lights up in the in‐strument cluster and DSC OFF is displayed inthe tachometer.The DSC system is switched ...

Driving comfort Cruise control The concept The system is functional at speeds beginning atapprox. 20 mph/30 km/h.It maintains the speed that was set using thecontrol elements on the steering wheel.The system brakes on downhill gradients if en‐gine braking action is insufficient. Unfavorable conditio...

Change, maintain speed The rocker switch can be pressed while inter‐rupted to maintain and store the current speed. Adapting the desired speedAdapt the desired speed to the road con‐ ditions and be ready to brake at all times; other‐wise, there is the danger of an accident occur‐ring.◀ Press the roc...

▷ Help you to estimate the space requiredwhen parking and maneuvering on levelroads. ▷ Are dependent on the current steering angleand are continuously adjusted to the steer‐ing wheel movements. Show the parking aid lines, refer to page 111 . Turning circle lines ▷ Can be shown in the backup camera i...

Cameras The objectives of the Top View cameras are lo‐cated at the bottom of the exterior mirror hous‐ings. The image quality may be impaired by dirt.Clean the lens, refer to page 257 . Side View* The concept Side View provides an early look at cross trafficat blind driveways and intersections. Road...

By engaging reverse Engage transmission position R.The current status of the parking space searchis indicated on the Control Display.Activate: "Parking Assistant" Select thesymbol in the Control Display. Display on the Control Display System status Symbol Meaning Gray: the system is not avai...

Limits of ultrasonic measurement The detection of objects can reach the physicallimits of ultrasonic measurement, for instance: ▷ With tow bars and trailer hitches. ▷ With thin or wedge-shaped objects. ▷ With elevated, protruding objects such asledges or cargo. ▷ With objects with corners and sharp ...

is moving from the right or left to the central area. Display in the Head-up Display* The warning is simultaneously dis‐played in the Head-up Display and in theControl Display. The displayed symbol can vary with the people detected. For peoplelocated in the central area, the distance to theperson is...

Climate control Automatic climate control 1 Air distribution, left2 Temperature, left3 AUTO program, left4 Air volume, AUTO intensity, residual heat, left 5 Remove ice and condensation6 Maximum cooling7 Display8 Air volume, AUTO intensity, right9 AUTO program, right10 Temperature, right 11 Air distr...

Temperature Turn the wheel to set the desiredtemperature. The automatic climate control achieves thistemperature as quickly as possible, if necessarywith the maximum cooling or heating capacity,and then keeps it constant.Avoid rapidly switching between different tem‐perature settings. The automatic ...

Automatic recirculated-air control/ recirculated-air mode You can respond to unpleasant odors or pollu‐tants in the immediate environment by tempo‐rarily suspending the supply of outside air. Thesystem then recirculates the air currently withinthe vehicle. Press the button repeatedly to selectan ope...

Switching the system on/off Switching off ▷ Complete system: At the lowest fan speed, press theleft side of the button on the driver's side. ▷ On the front passenger side: At the lowest fan speed, press theleft side of the button on the front passenger side. Switching on Press any button. Microfilte...

Interior equipment Integrated universal remote control* The concept This system can replace up to three differenthand-held transmitters for various types of re‐mote-controlled equipment, such as garagedoors or lighting systems.The hand-held transmitter signal can be pro‐grammed on one of the three m...

To do so: ▷ Read the instructions of the hand-heldtransmitter. ▷ Press the memory button of the universalremote control for an extended period. If the LED flashes rapidly for a brief period andthen lights up continuously for approx. 2 sec‐onds, the hand-held transmitter is equippedwith an alternatin...

Automatic transmission*: opening Press the button. Emptying Take out the insert. Lighter Push in the lighter.The lighter can be removed assoon as it pops back out. Danger of burnsOnly hold the hot lighter by its knob; oth‐ erwise, there is the danger of getting burned.Switch off the ignition and tak...

Ski bag* Capacity The ski bag makes it possible to transport twopairs of skis up to a length of 6 ft/2.10 m. Preparing and loading the ski bag 1. Pull the release and remove the insert fromthe front. 2. Lay out the ski bag. 3. Press button in the cargo area, open tail‐board and attach to the rear wa...

Storage compartments Storage compartments The following storage compartments are avail‐able in the vehicle interior: ▷ Glove compartment on the front passengerside, refer to page 132 . ▷ Storage compartment on the center con‐sole: manual transmission. ▷ Storage compartment in the center armrest,refe...

Locking the storage compartment The storage compartment in the armrest can belocked with an integrated key to separately se‐cure the trunk lid, refer to page 39 , for example. After the storage compartment is locked, the re‐mote control can be handed out without theintegrated key, refer to page 32 ,...

Automatic transmission*: center console To open: press on the cover. Storage compartments in the cargo area Net* Small objects can be stowed in the net on therear cargo area trim. Storage compartment under the cargo floor cover Raise the cargo floor cover using the strap. Lashing eyes To secure the ...

Driving tips This chapter provides you with information useful in dealing with specific driving and operating modes. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Things to remember when driving Breaking-in period General information Moving parts need to be broken in to adjust toeach other.The following instructions will help achieve along vehicle life and good economy. Engine and differential Always obey the official speed limit. Up to 1,200 miles/2,000 km D...

Climate control windshield* The marked area is not covered with heat re‐flective coating.Use this area for garage door openers, devicesfor electronic toll collection, etc. Mobile communication devices in the vehicle Mobile communication devices in the ve‐hicle It is advised that you do not use mobil...

The heat generated in this process helps dry thebrake discs and pads.In this way braking efficiency will be availablewhen you need it. Hills Drive long or steep downhill gradients in the gearin which the least braking is required. Otherwise,the brake system may overheat, resulting in areduction in t...

4. The resulting figure equals the availableamount of cargo and luggage load capacity.For example, if the YYY amount equals1,000 lbs and there will be four 150 lbs pas‐sengers in your vehicle, the amount of avail‐able cargo and luggage load capacity is400 lbs: 1,000 lbs minus 600 lbs = 400 lbs. 5. D...

Navigation This chapter contains various examples of how the navigation system can guide you reliably to your destination. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Navigation* Navigation system General information The navigation system can determine the pre‐cise position of the vehicle, with the aid of sat‐ellites and vehicle sensors, and can reliablyguide you to every entered destination.Navigation data are stored in the vehicle and canbe updated. Entries in ...

3. Select the numbers. 4. Change to the list of postal codes and towns/cities. 5. Highlight the entry. 6. Selecting an entry. Entering a street and intersection 1. Select "Street" or the displayed street. 2. Enter a street and intersection in the sameway as you would enter a town/city. If th...

Last destinations At a glance The destinations previously entered are storedautomatically.The destinations can be called up and used as adestination for destination guidance. Calling up the last destination 1. "Navigation" 2. "Last destinations" Starting destination guidance 1. "...

"Start search": if a search term is not entered,the search is repeated with the previous searchterm. Category search 1. "Category search" 2. "Town/City"Select or enter the town/city. 3. "Category" 4. Select the category. 5. "Category details"For some special d...

Specifying the street If the system does not recognize a street, one ofthe following is displayed: ▷ The name of a street in the vicinity. ▷ The county. ▷ The coordinates of the destination. Additional functions Additional functions are available on the inter‐active map after the controller is press...

Store the trip Up to 30 trips can be stored in the trip list. Ifnecessary, delete existing trips to be able tostore new trips. 1. Open "Options". 2. "Store trip" 3. Enter the name. 4. "OK" Select the stored trip 1. "Navigation" 2. "Stored trips" 3. Select a st...

Bypassing a section of the route Calculate a new route for a route section. 1. "Navigation" 2. "Route information" 3. "New route for" 4. Turn the controller. Enter the number of kilo‐meters within which you would like to returnto the original route. 5. Press the controller. R...

Settings for the map view The settings are stored for the remote controlcurrently in use. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Settings" Set the map view. ▷ "Day/night mode"Select and create the necessary settingsdepending on the light conditions.&#...

B. Total Traffic Network traffic data is infor‐mational only. User assumes all risk of use.Total Traffic Network, BMW NA, and theirsuppliers make no representations aboutcontent, traffic and road conditions, routeusability, or speed.C. The licensed material is provided to li‐censee “as is,” and “whe...

in the map using triangles or gray bars along thecalculated route. ▷ Red: congestion. ▷ Orange: stop-and-go traffic. ▷ Yellow: heavy traffic. ▷ Green: clear roads. ▷ Gray: general traffic bulletins, e.g., construc‐tion site. The displayed information depends on the par‐ticular traffic information se...

Navigation data Information on the navigation data 1. "Navigation" 2. Open "Options". 3. "Navigation system version": information onthe data version is displayed. Updating the navigation data General information Navigation data and authorization codes areavailable from your s...

Entertainment The chapter helps assure your enjoyment when receiving radio and television stations and playing CDs, DVDs and tracks from the music collection. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Tone General information The sound settings are stored for the remotecontrol currently in use. Treble, bass, balance, and fader ▷ "Treble": treble adjustment. ▷ "Bass": depth adjustment. ▷ "Balance": left/right volume distribution. ▷ "Fader": front/rear volume distrib...

When surround is activated, multi-channel play‐back is simulated when a stereo audio track isplayed. Volume ▷ "Speed volume": speed-dependent volumecontrol. ▷ "PDC": volume of the PDC signal* com‐pared to the entertainment sound output. ▷ "Gong": volume of the signal, such as...

Radio Controls 1 Change entertainment sources2 Change station/track3 Programmable memory buttons4 Volume, on/off5 Change wave band Sound output Switching on/off When the ignition is switched off: press ON/OFFbutton on the radio. Muting When the ignition is switched on or the engineis running: press ...

Storing the league or team Leagues or teams can be added to the favoritesfrom a selection list. 1. "Radio" 2. "Satellite radio" 3. "Manage favorites" 4. "Add sports information" 5. Select the league. 6. Select "Add all teams" or the desired team. Opening the f...

Select one of the symbols to deactivate TrafficJump. Automatic update About twice a year, Sirius performs an update ofthe channel names and positions. The updatetakes place automatically and may take severalminutes. Notes ▷ Reception may not be available in some sit‐uations, such as under certain en...

CD/multimedia Controls 1 Change the entertainment source2 CD/DVD* drive3 Eject CD/DVD4 Change station/track5 Programmable memory buttons6 Volume, on/off Sound output Switching on/off When the ignition is switched off: press ON/OFFbutton on the radio. Muting When the ignition is switched on or the en...

Selecting a track via iDrive Audio CDs Select the desired track to begin playback. CDs/DVDs* with compressed audio files Depending on the data, some letters and num‐bers of the CD/DVD may not be displayed cor‐rectly. 1. Select the directory if necessary.To change to a higher level directory: movethe...

Automatic repeat* The selected CDs or DVDs are repeated auto‐matically. Video playback* Country codes Only DVDs with the code of the home region canbe played back; also refer to the information onthe DVD. Code Region 1 USA, Canada 2 Japan, Europe, Middle East, South Af‐rica 3 Southeast Asia 4 Austra...

3. "Additional options" 4. "Zoom mode" Selecting a track DVD video: 1. Turn the controller when the DVD menu isdisplayed. 2. Open "Options". 3. "Additional options" 4. "Select title" 5. Select the desired track. VCD/SVCD: 1. "Select track" 2. Select th...

Sliding in CDs/DVDsDo not insert the CD/DVD until the LEDs on the DVD slot are flashing; otherwise, the CD/DVD or the DVD changer could be damaged.Do not continue to push on the CD/DVD; thismay cause it to jam and prevent it from beingable to eject again.◀ Filling all empty DVD compartments 1. Hold ...

1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired DVD. 4. Open "Options". 5. "Audio/language" 6. Select the desired language. Notes CD/DVD player and changer Do not remove the coverBMW CD/DVD players and changers are officially designated Class 1 laser products. Do...

DTS Digital Surround™ Manufactured under license under U.S.Patent Numbers: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &and other patents granted and registered in theUSA and worldwide. DTS and the logo are reg‐istered trademarks & DTS Digital Surround andthe DTS logos are trademar...

3. "Storing..." 4. "Cancel storing" The storage process is interrupted and can becontinued at any time. Continuing the storage process 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the symbol for the CD/DVD player. 4. "Continue storing" Storage of the CD/DVD contin...

4. Select the desired category. 5. Select the desired entry: ▷ Select "A-Z search", refer to page 24 , and input the desired entry. ▷ Select the desired entry from the list. 6. Select other categories if you wish.The tracks found are listed in alphabeticalorder.Not all categories need to be ...

The first track is played automatically, if pos‐sible. 4. Change directories if needed to selecttracks.To go up a level in the directory: move thecontroller to the left. Random playback All tracks of the selection are played back in ran‐dom order. 1. "CD/Multimedia" 2. "Music collection&...

Music collection Backing up the music collection The entire music collection can be stored on aUSB device. Make sure there is enough freememory capacity on the USB device.Depending on the number of tracks, backing upthe music collection may take several hours.Therefore, it is best to perform the bac...

Connect the headphones or line-out connectorof the device to the jack plug. Playback 1. Connect the audio device, switch it on andselect a track on the audio device. 2. "CD/Multimedia" 3. If necessary "External devices". 4. "AUX front" Volume The volume of the sound output is...

Connection of a USB device via the USB audio interface The USB audio interface is in the center armrest.Connect using a flexible adapter cable to protectthe USB audio interface and the USB deviceagainst physical damage. Connect the USB device to theUSB interface. After connecting for the first time ...

▷ Select the desired entry from the list. 6. Select other categories if you wish.Not all categories need to be selected. Forexample, if all of the tracks by a certain artistare to be displayed, call up that artist only.All of the tracks by that artist are then dis‐played. 7. "Start play" Res...

Information on connection ▷ The connected audio device is supplied witha max. power of 500 mA if supported by thedevice. Therefore, do not additionally con‐nect the device to a socket in the vehicle;otherwise, playback may be compromised. ▷ Do not use force when plugging the con‐nector into the USB ...

8. Select the desired functions with which thedevice is to be connected, for instance"Audio". 9. "OK" If pairing was successful, the device is displayedas connected.White symbol : the device is active as an audiosource.If pairing was unsuccessful: What to do if..., referto page 190 ....

▷ Adjust the volume settings on the device. Playback is disturbed when buttons are pressedor by other messages on the device. ▷ Switch off the button tones and other signaltones on the device. Playback is interrupted by a telephone call ortraffic bulletin and is not resumed automatically. ▷ Switch t...

Communication All of the options available to you for mobile communication with family, friends, business partners, and service providers are described in this chapter. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Telephone* At a glance The concept Mobile phones or other external devices such asaudio players can be connected to the vehiclevia Bluetooth.After these devices are paired once, they arerecognized automatically when the ignition isswitched on as soon as they are inside the ve‐hicle and can be operat...

Incoming call Receiving calls If the number of the caller is stored in the phonebook and is transmitted by the network, thename of the contact is displayed. Otherwise,only the phone number is displayed.If more than one phone number is assigned to acontact, only the name of the contact is dis‐played....

Removing the mobile phone Press the button and remove the mobile phone. Seite 206 206 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Telephone

Office* At a glance General information Contacts, appointments, tasks, notes, text mes‐sages, and e-mails from the mobile phone canbe displayed on the Control Display if the mobilephone provides compatible support of thesefunctions and the necessary Bluetooth stand‐ards.Information about which mobil...

2. "Contacts" All contacts are listed in alphabetical order. De‐pending on the number of contacts, an A-Zsearch is offered, refer to page 24 . A symbol indicates the storage location of thecontacts: Symbol Storage location No symbol In the vehicle; the address has not been checked as a desti...

5. "Delete contact"or "Delete all contacts". 6. If necessary. "Yes" Messages General information Whether or not text messages and e-mails fromthe mobile phone are displayed depends onwhether transmission from the mobile phone tothe vehicle is supported. Text messages and e-ma...

1. Select the desired message. 2. "Call": If the message contains a number, the con‐nection is established. "Select phone number": If the message contains more than one num‐ber, select the desired number from the list.The connection is established. E-mail* Displaying e-mails 1. "...

Reading the appointment out loud* Read the appointment out loud, refer topage 214 . Tasks Displaying the task list Display tasks that are due within the next90 days. 1. "Office" 2. "Tasks" Sorting the task list 1. Select the header in the task list. 2. Select the sorting criterion: ▷...

Contacts* General information Contacts can be created and edited and the ad‐dresses can be adopted as destinations for nav‐igation. New contact 1. "Contacts" 2. "New contact" 3. The entry fields are still filled with the previ‐ous entries: "Delete input fields" 4. Fill in the...

BMW ConnectedDrive BMW Assist* General information BMW Assist provides you with certain services,e.g., transmission of the position data of yourvehicle to the BMW Assist Response Center ifan Emergency Request* has been initiated.Many BMW Assist services depend on the indi‐vidually agreed upon contra...

in advance. This shortens the duration of theservice appointment. ▷ In the event of a breakdown, data on the ve‐hicle's condition can be sent directly toRoadside Assistance. ▷ The service varies by country. ▷ Connection costs may ensue. ▷ Services may be restricted abroad. Requirements ▷ BMW Assist ...

Opening the start page 1. Open "Options". 2. "Display start page" Loading a new page 1. Open "Options". 2. "Reload" Cancel 1. Open "Options". 2. "Cancel loading" Customer Relations At a glance Contact Customer Relations for information onall aspects of...

Automatic Service Request* The TeleService data necessary for servicingthe vehicle are automatically sent to your servicepartner prior to the service deadline. If possible,the service partner will contact you and a serviceappointment can be arranged.To check when your service partner was noti‐fied: ...

▷ Use only BMW approved software applica‐tions; otherwise, it may result in malfunc‐tions. Information about suitable cell phones, availablesoftware applications and their installation canbe found at www.bmw.com/connectivity or atthe service center. Create the entries.Make entries only when traffic ...

Mobility To ensure that you remain mobile at all times, this chapter supplies you with important information on the topics of fuels and lubricants, wheels and tires, service, maintenance, and Roadside Assistance. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Refueling Fuel cap Opening 1. Briefly press the rear edge of the fuel fillerflap. 2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached tothe fuel filler flap. Closing 1. Fit the cap and turn it clockwise until youclearly hear a click. 2. Close the fuel filler flap. Do...

Fuel tank capacity Fuel tank capacity: approx. 18.5 US gal/70 liters. Refuel promptlyRefuel below a range of 30 miles/50 km; otherwise, engine functions are not ensured anddamage may occur.◀ Seite 227 227 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Reference Mobility Communication Entert...

Fuel Fuel quality Refuel with unleaded fuel onlyDo not use leaded fuel as this would per‐ manently damage the catalytic converter.◀ Do not refuel with ethanolDo not refuel with E85, i.e., fuel with an ethanol content of 85 %, or with Flex Fuel, as thiswould damage the engine and fuel supply sys‐tem....

Wheels and tires Tire inflation pressure Safety information The tire characteristics and tire inflation pres‐sure influence the following: ▷ The service life of the tires. ▷ Road safety. ▷ Driving comfort. Checking the pressure Only check the tire inflation pressure when thetires are cold. This mean...

Tire inflation pressure values up to 100 mph/160 km/h 650i Tire size Pressure specifica‐tions in bar/PSI Specifications in psi/kilopascal with coldtires 245/45 R 18 100 V M+S XL A/S245/40 R 19 98 V M+S XL A/S245/45 R 18 96 Y245/45 R 18 100 V M+S XL 2.3 / 33 2.6 / 38 F: 245/45 R 18 96 YR: 275/40 R 18...

Tire size Pressure specificationsin bar/PSI F: 245/40 R 19 94 YR: 275/35 R 19 96 Y 2.6 / 38- -3.0 / 44 F: 245/35 R 20 95Y XLR: 275/30 R 20 97Y XL 2.8 / 41- -3,3 / 48 Tire identification marks Tire size 255/50 R 19 103 Y255: nominal width in mm50: aspect ratio in %R: radial tire code19: rim diameter ...

placed. Otherwise, damage can occur as a re‐sult.◀ Changing wheels and tires Mounting Information on mounting tiresHave mounting and balancing performed only by a service center or tire specialist.If this work is not carried out properly, there isthe danger of subsequent damage and relatedsafety haz...

Maximum speed of winter tires If the maximum speed of the vehicle is higherthan the permissible speed for the winter tires,then display a corresponding sign in the field ofvision. You can obtain this sign from the tire spe‐cialist or from your service center. Maximum speed for winter tiresDo not exc...

Maximum speed with snow chains Do not exceed a speed of 30 mph/50 km/h whenusing snow chains. Snow chain detection* The concept When using snow chains, you should setwhether you are driving with or without snowchains via the iDrive.The snow chain detection system supports youby automatically showing...

Engine compartment Important features in the engine compartment 1 Vehicle identification number*2 Jump starting, negative terminal3 Washer fluid reservoir 4 Jump starting, positive terminal5 Oil filler neck6 Coolant reservoir Hood Opening the hood Working in the engine compartmentNever attempt to pe...

2. Press the release handle and open the hood. 3. Be careful of protruding parts on the hood. Danger of injury when the hood is openThere is a danger of injury from protruding parts when the hood is open.◀ Closing the hood Let the hood drop from a height of approx. 16 in/40 cm and push down on it to...

Engine oil General information The engine oil consumption is dependent on thedriving style and driving conditions.Therefore, check the engine oil level after everyrefueling using the electronic engine oil levelcheck. Checking the oil level The concept The oil level is monitored electronically and di...

Oil types Note No oil additivesOil additives may lead to engine damage.◀ Approved oil types Your service center can advise you on which en‐gine oils have been approved by the manufac‐turer of your vehicle.The engine oil quality is critical for the life of theengine.Only use approved BMW High Perform...

Disposal Comply with the relevant environmentalprotection regulations when disposingof coolant and coolant additives. Seite 240 240 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Engine oil

Maintenance BMW Maintenance System The maintenance system directs you to re‐quired maintenance measures and thereby sup‐ports you in maintaining road safety and the op‐erational reliability of the vehicle. Condition Based Service CBS Sensors and special algorithms take into ac‐count the driving cond...

Replacing components Tool kit The tool kit is stored under the cargo floor coverin the cargo area. Wiper blade replacement Do not fold down the wipers without wiperblades Do not fold down the wipers if wiper blades havenot been installed; this may damage the wind‐shield.◀ Replacing the wiper blades ...

1. Unscrew the cap and remove it. 2. Detach the wire bracket. 3. Disconnect the cable at the plug-in connec‐tion and remove the bulb. 4. Insert the new bulb. Ensure that the bulb hasthe correct orientation. Because of itsshape, the bulb can only be inserted in onedirection. 5. Secure the bulb with t...

3. Replace the bulb. 4. Mount the bulb holder and the cover of thetrunk lid in reverse order. Backup lamp Follow the general instructions on lamps andbulbs, refer to page 243 . 16-watt bulb, W16W 1. Unscrew the bulb holder counterclockwise. 2. Pull out the bulb and replace it. 3. Mount the bulb hold...

Vehicle battery Maintenance The battery is maintenance-free, i.e., the elec‐trolyte will last for the life of the battery.Your service center will be glad to advise you onquestions regarding the battery. Battery replacement Use approved vehicle batteries only.Only use vehicle batteries that have bee...

Breakdown assistance Hazard warning flashers The button is located in the center console. Emergency Request* Requirements ▷ Equipment version with full preparationpackage mobile phone.An Emergency Request can be made, evenif no mobile phones are paired with the ve‐hicle. ▷ BMW Assist is activated. ▷...

Assist Response Center may still be able tohear you. Initiating an Emergency Request automatically Under certain conditions, an Emergency Re‐quest is automatically initiated immediately aftera severe accident. Automatic Collision Notifica‐tion is not affected by pressing the SOS button. Warning tria...

attempt in order to allow the discharged bat‐tery to recharge. 3. Let both engines run for several minutes. 4. Disconnect the jumper cables in the reverseorder. Check the battery and recharge if necessary. Tow-starting and towing Manual transmission Observe before towing your vehicle The parking bra...

Towing other vehicles General information Light towing vehicleYour vehicle must not be lighter than the vehicle being towed; otherwise, it will not bepossible to control vehicle response.◀ Attaching the tow bar/tow rope correctlyAttach the tow bar or tow rope to the tow fitting; connecting it to oth...

Care Car washes Notes Steam jets or high-pressure washersWhen using steam jets or high-pressure washers, hold them a sufficient distance awayand use a maximum temperature of 140 ℉/60 ℃.Holding them too close or using excessivelyhigh pressures or temperatures can cause dam‐age or preliminary damage t...

A signal is sounded when an attempt is made tolock the vehicle. Transmission position Transmission position P is engaged automati‐cally: ▷ When the ignition is switched off. ▷ After approx. 15 minutes. Headlamps ▷ Do not rub dry and do not use abrasive orcaustic cleansers. ▷ Soak areas that have bee...

Only use floor mats that have been approved forthe vehicle and can be properly fixed in place.Ensure that the floor mats are securely fastenedagain after they were removed for cleaning, forexample.◀ Floor mats can be removed from the passengercompartment for cleaning.If the floor carpets are very di...

Reference This chapter contains technical data, short commands for the voice activation system, and an index that will quickly take you to the information you need. Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Technical data Dimensions Width, height 1 Vehicle height: 53.8 inches / 1,365 mm2 Vehicle width without mirrors: 74.6 in‐ ches / 1,894 mm 3 Vehicle width with mirrors: 81.9 in‐ ches / 2,081 mm Seite 260 260 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Technical data

Length, wheel base 1 Wheel base: 112.4 inches / 2,855 mm2 Length: 192.8 inches / 4,896 mm Smallest turning circle Dia.: 38 ft 5 inches/11.7 m Weights 650i Approved gross vehicle weight Manual transmissionSport automatic transmission lbs/kglbs/kg 5,401/2,4505,401/2,450 Load lbs/kg 772/350 Approved fr...

Capacities Notes Fuel tank US gal/liters approx. 18.5/70 Fuel quality, referto page 228 Windshield and headlampwasher system US quarts/liters approx. 5.3/5.0 Seite 262 262 Online Edition for Part no. 01 40 2 606 521 - 03 11 490 Technical data

Short commands of the voice activation system* General information Instructions for voice activation system, refer topage 25 . To have the available spoken instructions readout loud: ›Voice commands‹ Adjusting Vehicle Function Command Open the main menu. ›Main menu‹ Open the options. ›Options‹ Open ...

Vehicle information Owner's Manual Function Command Open the Owner's Manual. ›Display Owner's Manual‹ Open the Quick Reference Guide. ›Quick reference‹ Open the index. ›Owner's Manual‹ Open the search by pictures. ›Search by pictures‹ Computer Function Command Open the computer. ›Onboard info‹ Open ...

Function Command Split screen, facing the direction of travel. ›Split screen map in direction of travel‹ Split screen, perspective. ›Split screen perspective‹ Split screen, expanded intersection zoom. ›Splitscreen Exit ramp view‹ Split screen scale...feet. ›Split screen scale ... feet‹ e.g., split s...

Cooling system 239 Corrosion on brake discs 140 Cruise control 106 Cruising range 74 Cupholder 133 Current fuel consumption 75 Current location, storing 148 Customer Relations 221 D Damage, tires 232 Damping control, dy‐ namic 102 Data, technical 260 Date 76 Daytime running lights 85 Defrosting, ref...