Black & Decker VEC012BBD - Manuals

5 USING THE BATTERY CHARGER Ensure that all installation and operating instructions, and safety precautions are understood and carefully followed by anyoneinstalling or using the charger. Follow the steps outlined in the“Important Safety Instructions” at the front of this User’s Manual. Charge Rate ...

7 USING THE JUMP-STARTER This Jump-Starter is equipped with Good/Bad Polarity Indicators. Energy will onlyflow when proper connections are made to the battery and frame. Once theconnections are properly made, follow the steps below to jump-start the vehicle. 1. Turn OFF vehicle ignition and all acce...

9 2. Plug the other end of the cord into a standard North American 120 volt AC wall outlet. 3. Charge until the green (FULL) Battery Status LED Indicator on the front of the unit lights. 3. After initial charge, recharge this device as necessary for at least 14-16 hours or until the green (FULL)Batt...

11 • If the situation persists after reconditioning and equalizing, we recommend taking your battery to a certified automotive service center for evaluation. F04 — Overtime Condition Appears when charging time exceeds 18 hours. You may be using a charge currentrate too low for a large battery. Selec...