Black & Decker VEC012BBD - Manual

Black & Decker VEC012BBD

Black & Decker VEC012BBD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – IMPORTANT SAFETY INSTRUCTIONS
  • Page 3 – Read This User’s Manual Before Using This Unit.; SAVE THESE INSTRUCTIONS; TABLE OF CONTENTS; INTRODUCTION; Thank you for choosing the; Battery; can also be used as a safe, portable source of 12 volt DC
  • Page 4 – Controls and Indicators; Battery Voltage —; FEATURES
  • Page 5 – USING THE BATTERY CHARGER; Charge Rate Selection; Alternator Check —; is a quick check that measures the battery voltage. This check; Large 3-Character Digital Display; in the upper left of the control panel indicates; POWER —; lights at the conclusion of the Alternator Check to indicate; AC POWER INDICATOR -; FAULT CODES
  • Page 6 – USING THE JUMP-STARTER; Connect the RED clamp first,; CAUTIONS; before beginning the jump-starting procedure.; Alternator Check; Approximate Charging Times; /6/10 Amp 12 Volt Smart Battery Charger
  • Page 7 – 2 Volt DC Charging; WARNING; • Never touch RED and BLACK clamps together — this can cause; USING THE 12 VOLT DC PORTABLE POWER SUPPLY; DO NOT EXCEED A 5 AMP; USING THE EMERGENCY LED AREA LIGHT; 20 Volt AC Recharge
  • Page 8 – Charging a Very Cold Battery; SPECIFICATIONS; Battery Replacement; TROUBLESHOOTING; Display Indications/Common Problems/Possible Solutions
Loading the manual

VEC012BBD

USER’S MANUAL

& WARRANTY INFORMATION

IMPORTANT SAFETY INFORMATION, SAVE THESE

INSTRUCTIONS

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.

www.vectormfg.com

4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.

Toll Free: (800) 618-5178

12

START-IT

®

Jump ’n Charge

Smart

Battery Charger/Jump-Starter

with 450 Instant Starting Amps

12 Volt DC Power Supply • LED Emergency Area Light

TWO YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the

responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than

those described herein. Any implied warranty of merchantability or fitness for a particular purpose on

this product is limited in duration to the duration of this warranty.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in

materials and workmanship for two years from the date of purchase without additional charge. The

warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for

any amount of damage in excess of the retail purchase price of the product under any circumstances.

Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to damage to units from

misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper polarity

power sources.
RETURN/REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product

that is returned to manufacturer within 30 days of the date of purchase will be replaced free of charge.

If such a product is returned more than 30 days but less than two years from the purchase date,

manufacturer will repair the unit or, at its option, replace it, free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option.

A unit may be replaced with a new or reconditioned unit of the same or comparable design. The

repaired or replaced unit will then be warranted under the terms of the remainder of the warranty

period. The customer is responsible for the shipping charges on all returned items. During the warranty

period, manufacturer will be responsible for the return shipping charges to the customer in the United

States.
LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and

batteries, damage or defects resulting from normal wear and tear (including chips, scratches, abrasions,

discoloration or fading due to usage or exposure to sunlight), accidents, damage during shipping to our

service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow

instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at (800)

618-5178 for general repair information and charges if applicable. You may also contact us through

our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations

on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential

damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser

specific legal rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax

or mail (see below). We suggest that you keep the original packaging in case you need to ship the unit.

When returning a product, include your name, address, phone number, dated sales receipt (or copy)

and a description of the reason for return and product serial number. After repairing or replacing the

unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector

Manufacturing. Enter “VEC012BBD” as Model and “START-IT

®

Jump ’n Charge

” as Product Type. All

Vector products must be registered within 30 days of purchase to activate this warranty. Mail the

completed registration form, along with a copy of the original sales receipt, to:

ATTN.: CUSTOMER SERVICE

4140 SW 30th Ave., Ft. Lauderdale, FL 33312

• TOLL FREE: (800) 618-5178 •

WARRANTY IS NON-TRANSFERABLE.

BD020106

© 2006 VECTOR MANUFACTURING

MADE IN CHINA

VEC012BBD_ManualEN_020106 2/1/06 3:13 PM Page 12

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

iii 8. Use charger for charging a LEAD-ACID battery only. It is not intended to supply power to a low- voltage electrical system other than in a starter-motor application. Do not use the battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may ...

Page 3 - Read This User’s Manual Before Using This Unit.; SAVE THESE INSTRUCTIONS; TABLE OF CONTENTS; INTRODUCTION; Thank you for choosing the; Battery; can also be used as a safe, portable source of 12 volt DC

iv 7. When disconnecting charger, disconnect AC cord, remove clamp from vehicle chassis, and then remove clamp from battery terminal. 8. Do not charge the battery while the engine is operating.9. See operating instructions for length of charge information. Follow these steps when the battery has bee...

Page 4 - Controls and Indicators; Battery Voltage —; FEATURES

3 • Includes non-spillable, maintenance-free, heavy-duty, sealed battery• Rechargeable with either supplied 12 Volt DC Charging Adapter or built-in 120 Volt AC Charger • Heavy duty, industrial grade copper clamps, and #6AWG jumper cables with exclusive recessed cable holsters • Requires no maintenan...

Other Black & Decker Models

All Black & Decker Other