Black Box ServSwitch Video Switch - Manuals

Page 2 - TRADEMARKS USED IN THIS MANUAL; of the trademark owners.

2 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH TRADEMARKS USED IN THIS MANUAL BLACK BOX and the logo are registered trademarks, and ServSwitch is a trademark, of Black Box Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of IBM Corporation. S...

Page 4 - de que el aparato eléctrico sea operado.

4 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL-SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán...

Page 5 - NOM STATEMENT

5 NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos,poniendo particular aten...

Page 6 - Chapter

6 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH Contents Chapter Page 1. Specifications ............................................................................................. 7 2. Introduction ............................................................................................... 9 3. Instal...

Page 7 - CHAPTER 1: Specifications; DTE

7 CHAPTER 1: Specifications 1. Specifications Compliance — CE; FCC Part 15 Subpart J Class A, IC Class/classe A Standards — VGA, SVGA, XGA, or XGA-2 video Interfaces — Video: VGA;Serial: EIA/TIA RS-232, pinned according to TIA-574, DTE SupportedVideo Types — RGBHV (VGA, SVGA, XGA, or XGA-2), RGBS, o...

Page 8 - Up to 95% noncondensing

8 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH Connectors — On Switch itself: (8) HD15 female for video: (4) to CPUs’ video ports (or other sources), (4) to monitors (or otherdestinations); (1) DB9 male for serial;(1) 5-pin DIN female for power; On power-supply transformer: (1) IEC male inlet for power Ma...

Page 9 - CHAPTER 2: Introduction; do

9 CHAPTER 2: Introduction 2. Introduction The ServSwitch ™ Brand Matrix Video Switch is an ideal tool for sharing and/or switching between the output of as many as four video sources (such as PCs), inorder to display or capture that output at up to four video destinations (such asmonitors).Once you ...

Page 10 - To set up your ServSwitch

10 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH 3. Installation To set up your ServSwitch ™ Brand Matrix Video Switch system, take these steps: 1. Making sure that the Switch is powered off, find its input ports. (These are the top row of HD15 connectors on its rear panel, shown in Figure 3-1,labeled “CPU...

Page 11 - CHAPTER 3: Installation

11 CHAPTER 3: Installation 3. If you’ll be using the included keypad to control the Switch, plug it into the Switch’s DB9 male RS-232 port. If you’ll be using a PC (or some other RS-232DTE device with a DB9 male serial port) to control the Switch, run DB9 null-modem cable such as our product code EY...

Page 12 - The LEDs on the ServSwitch

12 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH 4. Operation 4.1 The Switch’s LEDs The LEDs on the ServSwitch ™ Brand Matrix Video Switch’s front panel, shown in Figure 4-1, indicate which of the Switch’s outputs are displaying the video fromwhich inputs, and which outputs have been blanked and aren’t sho...

Page 13 - Switching Manually With the Keypad; out

13 CHAPTER 4: Operation 4.2 Switching Manually With the Keypad To switch a given output to display a given input (or to blank an output), press“[ out ][.][ in ][Enter]” on the Switch’s keypad, where: • [ out ] is the number of the output channel (1 through 4, or “*” for all outputs); • [.] is the ke...

Page 14 - for a description of the command syntax.) When you; Keypad

14 SERVSWITCH ™ BRAND MATRIX VIDEO SWITCH 4.3 Switching With (or Through) a Serial Device To control the Matrix Video Switch through an attached PC or other serial device,the serial device has to be able to communicate with the Switch. (You’ll need to setthe device to 1200 bps, 8 data bits, and no p...

Page 15 - do not attempt to alter or repair the unit; Shipping and Packaging; If you need to transport or ship your Switch:

15 CHAPTER 5: Troubleshooting 5. Troubleshooting 5.1 Calling Black Box If you determine that your ServSwitch™ Brand Matrix Video Switch ismalfunctioning, do not attempt to alter or repair the unit . It contains no user- serviceable parts. Contact Black Box Technical Support at 724-746-5500. Before y...

Page 16 - ADDENDUM – Advanced Features; òò; Scan Mode; Activating the Scan Mode; individual scan; Exiting Scan Mode; all scan; Changing the Scan Timing

ADDENDUM – Advanced Features ò òò òò òò ò Scan Mode 16 The ACL0404A has a “Scan Mode” whereby each output automatically cycles through and displays all inputs at a customer specified rate. Activating the Scan Mode There are 2 types of scan modes: individual scan and all scan . To enter individual sc...