Black Box LPB2810A - Manuals

Page 2 - Trademarks Used in this Manual

724-746-5500 | blackbox.com Page 2 724-746-5500 | blackbox.com Trademarks We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.” You’ll be live with one of our techni...

Page 3 - FCC Statement; Statements

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 3 FCC Statement Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in stric...

Page 4 - NOM Statement; Todas las instrucciones de operación y uso deben ser seguidas.

724-746-5500 | blackbox.com Page 4 724-746-5500 | blackbox.com NOM Statement Instrucciones de Seguridad(Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones d...

Page 5 - Table of Contents

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 5 Table of Contents Table of Contents 1. Overview ............................................................................................................................................................................... 9 1.1 Initial...

Page 10 - Initial Configuration

724-746-5500 | blackbox.com Page 10 724-746-5500 | blackbox.com Chapter 1: Overview 1.1 Initial Configuration This section details how to configure and manage the PoE+ Gigabit Managed Switch Eco through the Web user interface. This feature enables administrators to easily access and monitor the enti...

Page 14 - Network Wiring Connections; located, and the other end to a modular wall outlet.

724-746-5500 | blackbox.com Page 14 724-746-5500 | blackbox.com Chapter 1: Overview 1.3 Network Wiring Connections Today, the punchdown block is an integral part of many of the newer equipment racks. It is actually part of the patch panel. Instructions for making connections in the wiring closet wit...

Page 15 - Chapter 2: System Configuration; System Configuration; The switch system information is provided here.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 15 Chapter 2: System Configuration 2. System Configuration This chapter describes all of the basic configration tasks, including the system information and any management of the switch (e.g., Time, Account, IP, Syslog, and SNMP). 2.1 Syste...

Page 17 - Web Interface

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 17 Chapter 2: System Configuration 2.1.2 Configuration You can identify the system by configuring the contact information, name, and location of the switch. Web Interface To configure System Information in the Web interface: 1. Click Syste...

Page 20 - Daylight Savings

724-746-5500 | blackbox.com Page 20 724-746-5500 | blackbox.com Chapter 2: System Configuration • Daylight Savings : Daylight savings time is used in some countries. If you select this setting, the unit will adjust the time, for- ward or backward in increments of one hour, between the starting date ...

Page 24 - Parameter Description

724-746-5500 | blackbox.com Page 24 724-746-5500 | blackbox.com Chapter 2: System Configuration Parameter Description • Group Name The name identifying the privilege group. In most cases, a privilege level group consists of a single module (e.g. LACP, RSTP or QoS), but a few of them contain more tha...

Page 25 - Configure the switch-managed IP information on this page.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 25 Chapter 2: System Configuration 2.4 IP (Internet Protocol) IP is an acronym for Internet Protocol. It is a protocol used for communicating data across an Internet network. IP is a "best effort" system, which means that no packet...

Page 26 - : Provide the IP address of this switch in dotted decimal notation.

724-746-5500 | blackbox.com Page 26 724-746-5500 | blackbox.com Chapter 2: System Configuration Parameter Description • DHCP Client : Enable the DHCP client by checking this box. If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP address is non-...

Page 27 - Configure the switch-managed IPv6 information on this page.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 27 Chapter 2: System Configuration 2.4.2 IPV6 This section describes how to configure the switch-managed IPv6 information. The Configured column is used to view or change the IPv6 configuration. And the Current column is used to show the a...

Page 33 - To display the SNMP Users Configuration in the Web interface:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 33 Chapter 2: System Configuration 2.6.3 Users The function is used to configure SNMPv3 users. The Entry index key is UserName. To create a new UserName account, check the <Add new user> button, enter the user information, and then c...

Page 34 - Authentication Password

724-746-5500 | blackbox.com Page 34 724-746-5500 | blackbox.com Chapter 2: System Configuration • Authentication Password : A string identifying the authentication password phrase. For MD5 authentication protocol, the string length should be 8 to 32 ASCII characters from 33 to 126. For SHA authentic...

Page 35 - To display the configure SNMP Groups in the Web interface:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 35 Chapter 2: System Configuration 2.6.4 Groups This function is used to configure SNMPv3 group. The Entry index keys are Security Model and Security Name. To create a new group account, please check <Add new group> button, and enter...

Page 36 - : Check to delete the entry. It will be deleted during the next save.

724-746-5500 | blackbox.com Page 36 724-746-5500 | blackbox.com Chapter 2: System Configuration 2.6.5 Views This function is used to configure SNMPv3 view. The entry index keys are OID Subtree and View Name. To create a new view account, click the <Add new view> button, and enter the view info...

Page 37 - To display the configure SNMP Access in the Web interface:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 37 Chapter 2: System Configuration 2.6.6 Access This function is used to configure SNMPv3 access. The entry index keys are Group Name, Security Model and Security level. To create a new access account, check <Add new access> button, ...

Page 38 - To configure SNMP Trap setting:

724-746-5500 | blackbox.com Page 38 724-746-5500 | blackbox.com Chapter 2: System Configuration • Read View Name : The name of the MIB view defining the MIB objects for which this request may request the current values. The string length should be 1 to 32 characters, using ASCII characters from 33 t...

Page 40 - Chapter 3: Configuration; • Maximum Frame Size

724-746-5500 | blackbox.com Page 40 724-746-5500 | blackbox.com Chapter 3: Configuration 3. Configuration This chapter describes all the basic network configuration tasks, which include the Ports, Layer 2 network protocol (e.g. VLANs, QoS, IGMP, ACLs and PoE etc.), and any setting of the switch. 3.1...

Page 49 - : The switch port number of the logical EEE port.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 49 Chapter 3: Configuration LPB2810A Parameter Description EEE Port Configuration : The EEE port settings relate to the currently selected item, as shown in the page header. • Port : The switch port number of the logical EEE port. • EEE En...

Page 51 - The default value is “Disabled“.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 51 Chapter 3: Configuration LPB2810A • Rate Limiter ID : Select which rate limiter to apply on this port. The permitted values are “Disabled“ or the values 1 through 16. The default value is “Disabled“. • Port Copy : Select which port fram...

Page 52 - To configure ACL Rate Limiter in the Web interface:

724-746-5500 | blackbox.com Page 52 724-746-5500 | blackbox.com Chapter 3: Configuration LPB2810A 3.2.2 Rate Limiters This section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate Limiter Levels from 1 to 16 permit the user to set rate limiter value and units with pps or...

Page 58 - aggregation. Only one group ID is valid per port.

724-746-5500 | blackbox.com Page 58 724-746-5500 | blackbox.com Chapter 3: Configuration LPB2810A Parameter Description Hash Code Contributors • Source MAC Address : The Source MAC address can be used to calculate the destination port for the frame. Check to enable the use of the Source MAC address ...

Page 59 - LACP is safer than the other trunking method, static trunk.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 59 Chapter 3: Configuration LPB2810A 3.3.2 LACP Ports using Link Aggregation Control Protocol (according to IEEE 802.3ad specification) as their trunking method can choose their unique LACP GroupID to form a logic “trunked port”. The benef...

Page 61 - To display the LACP Port Status in the Web interface:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 61 Chapter 3: Configuration LPB2810A Port Status When you set the LACP function on the switch, a Port Status overview for all LACP instances is enabled. Web Interface To display the LACP Port Status in the Web interface: 1. Click Configura...

Page 64 - Scoll to select your parameters and the values in Basic Settings.

724-746-5500 | blackbox.com Page 64 724-746-5500 | blackbox.com Chapter 3: Configuration LPB2810A 3.4.1 Bridge Settings This section describes how to configure the Spanning Tree Bridge and STP System settings. It allows you to configure STP System settings that are used by all STP Bridge instances i...

Page 65 - Click the Save button to save the setting.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 65 Chapter 3: Configuration LPB2810A Advanced Settings • Edge Port BPDU Filtering : Control whether a port explicitly configured as Edge will transmit and receive BPDUs. • Edge Port BPDU Guard : Control whether a port explicitly configured...

Page 67 - Click the Save button to save the setting.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 67 Chapter 3: Configuration LPB2810A Parameter Description • MSTI: The bridge instance. The CIST is the default instance, always active. • Priority: Controls the bridge priority. Lower numeric values have better priority. The bridge priori...

Page 72 - To display the STP Port status in the Web interface:

724-746-5500 | blackbox.com Page 72 724-746-5500 | blackbox.com Chapter 3: Configuration 3.4.8 Port Statistics After you complete the STP configuration, configure the switch to display the STP Statistics. This section enables you to adjust the STP Statistics detail counters of bridge ports in the cu...

Page 73 - Configuration

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 73 Chapter 3: Configuration 3.5 Loop Detection Loop detection is used to detect the presence of traffic. When a switch receives a packet’s (looping detection frame) MAC address that’s the same as the MAC address from the port, loop detecti...

Page 75 - : Enable unregistered IPMCv4 traffic flooding.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 75 Chapter 3: Configuration Parameter Description • Snooping Enabled : Enable the Global IGMP Snooping. • Unregistered IPMCv4 Flooding Enabled : Enable unregistered IPMCv4 traffic flooding. • IGMP SSM Range : SSM (Source-Specific Multicast...

Page 76 - range is 1 to 255 the default Robustness Variable value is 2.

724-746-5500 | blackbox.com Page 76 724-746-5500 | blackbox.com Chapter 3: Configuration Parameter Description • VLAN ID : It displays the VLAN ID of the entry. • Snooping Enabled : Enable the per-VLAN IGMP Snooping. Only up to 32 VLANs can be selected. • IGMP Querier : Sends IGMP Query messages ont...

Page 77 - Click Add new Filtering Group

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 77 Chapter 3: Configuration Web Interface To configure the IGMP Snooping Port Group Configuration in the Web interface: 1. Click Configuration, IGMP Snooping, Port Group Filtering 2. Click Add new Filtering Group 3. Scroll the Port to enab...

Page 78 - To display the IGMP Snooping status in the Web interface:

724-746-5500 | blackbox.com Page 78 724-746-5500 | blackbox.com Chapter 3: Configuration 3.6.4 Status After completing the IGMP Snooping configuration, the switch will display the IGMP Snooping Status. This section enables you to view the IGMP Snooping detail status. Web Interface To display the IGM...

Page 79 - up page or to the next entry.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 79 Chapter 3: Configuration 3.6.5 Group Information After setting the IGMP Snooping function, you can view the IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on this page. The IGMP Group Table is sorted first by...

Page 80 - To display the IGMPv3 IPv4 SSM Information in the Web interface:

724-746-5500 | blackbox.com Page 80 724-746-5500 | blackbox.com Chapter 3: Configuration 3.6.6 IPv4 SSM information Source Specific Multicast (SSM) is a datagram delivery model that best supports one-to-many applications, also known as broadcast applications. SSM is a core network technology of IP m...

Page 81 - Mode

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 81 Chapter 3: Configuration • Mode : Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude. • Source Address : The IP Address of the source. Currently, system limits th...

Page 82 - To configure the MLD Snooping Configuration in the Web interface:

724-746-5500 | blackbox.com Page 82 724-746-5500 | blackbox.com Chapter 3: Configuration 3.7 MLD Snooping Curiously enough, a network node that acts as a source of IPv6 multicast traffic is only an indirect participant in MLD snooping—it just provides multicast traffic, and MLD doesn’t interact with...

Page 83 - : To evoke to enable the fast leave on the port.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 83 Chapter 3: Configuration Figure 3-34. The MLD Snooping Basic Configuration screen. Parameter Description • Snooping Enabled : Enables the Global MLD Snooping. • Unregistered IPMCv6 Flooding Enabled : Enable unregistered IPMCv6 traffic f...

Page 84 - Specify the VLAN ID with the number of entries per page.

724-746-5500 | blackbox.com Page 84 724-746-5500 | blackbox.com Chapter 3: Configuration 3.7.2 VLAN Configuration When MLD snooping is enabled on a VLAN, the switch acts to minimize unnecessary multicast traffic. If the switch receives multicast traffic destined for a given multicast address, it for...

Page 85 - to navigaate to the next page or entry.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 85 Chapter 3: Configuration • Icons, upper right of screen (Refresh, <<, >> ) : Click “Refresh“ to refresh the IGMP Group Status manually; click the arrows to navigaate to the next page or entry. • Buttons : - Save: Click to sa...

Page 87 - Click “Refresh“ to refresh the MLD Snooping Group Information.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 87 Chapter 3: Configuration 3.7.5 Group Information This section describes how to set MLD Snooping Groups Information. The “Start from VLAN“, and “group“ input fields allow the user to select the starting point in the MLD Group Table. Each...

Page 88 - To display the MLDv2 IPv6 SSM Information in the Web interface:

724-746-5500 | blackbox.com Page 88 724-746-5500 | blackbox.com Chapter 3: Configuration 3.7.6 IPv6 SSM Information This section describes how to configure the entries in the MLDv2 Information Table. The MLDv2 Information Table is sorted first by VLAN ID, then by group, and then by Port No. Differen...

Page 90 - To display the MVR Groups Information in the Web interface:

724-746-5500 | blackbox.com Page 90 724-746-5500 | blackbox.com Chapter 3: Configuration 3.8.2 Groups Information This section describes how to display the MVR Groups detail information on the switch. Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted first by VLAN ...

Page 91 - To display the MVR statistics information in the Web interface:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 91 Chapter 3: Configuration 3.8.3 Statistics This section describes the switch will display the MVR detail statistics after you had configured MVR on the switch. It provides the detail MVR statistics information. Web Interface To display t...

Page 93 - • Port: The switch port number of the logical LLDP port.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 93 Chapter 3: Configuration • Tx Delay: If some configuration is changed (e.g. the IP address) a new LLDP frame is transmitted, but the time between the LLDP frames will always be at least the value of Tx Delay seconds. Tx Delay cannot be ...

Page 95 - System Description

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 95 Chapter 3: Configuration • System Description : System Description is the port description advertised by the neighbor unit. • Management Address : Management Address is the neighbor unit’s address that is used for higher layer entities ...

Page 96 - Parameter Description Fast Start Repeat Count

724-746-5500 | blackbox.com Page 96 724-746-5500 | blackbox.com Chapter 3: Configuration Figure 3-45. The LLDP-MED Configuration screen. Figure 3-46. The LLDP-MED Configuration Policies screen . Parameter Description Fast Start Repeat Count The Rapid startup and Emergency Call Service Location Ident...

Page 97 - direction to either north of the equator or south of the equator.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 97 Chapter 3: Configuration Parameter Description: Coordinates Location • Latitude: Latitude should be normalized to within 0-90 degrees with a maximum of 4 digits. It is possible to specify the direction to either north of the equator or ...

Page 98 - The network policy attributes advertised are:

724-746-5500 | blackbox.com Page 98 724-746-5500 | blackbox.com Chapter 3: Configuration • Apartment : Unit (Apartment, suite) - Example: Apt 42. • Floor : Floor - Example: 4. • Room no. : Room number - Example: 450F. • Place type : Place type - Example: Office. • Postal community name : Example: Le...

Page 99 - Intended use of the application types:

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 99 Chapter 3: Configuration • Application Type: Intended use of the application types: 1. Voice - for use by dedicated IP telephony handsets and similar appliances supporting interactive voice services. These devices are typically deployed...

Page 101 - inventory management.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 101 Chapter 3: Configuration • LLDP-MED Generic Endpoint (Class I) : The LLDP-MED Generic Endpoint (Class I) definition is applicable to all endpoint products that require the base LLDP discovery services defined in TIA-1057, however do no...

Page 102 - either Defined or Unknown.

724-746-5500 | blackbox.com Page 102 724-746-5500 | blackbox.com Chapter 3: Configuration 7. Streaming Video - for use by broadcast or multicast-based video content distribution and other similar applications supporting streaming video services that require specific network policy treatment. Video a...

Page 105 - Neighbor entries were last changed at

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 105 Chapter 3: Configuration 3.9.7 Port Statistics Two types of counters are shown. Global counters are counters that refer to the whole switch, while local counters refer to per-port counters for the currently selected switch. Web Interfa...

Page 106 - Frames Discarded

724-746-5500 | blackbox.com Page 106 724-746-5500 | blackbox.com Chapter 3: Configuration • Frames Discarded : If an LLDP frame is received on a port, and the switch’s internal table has run full, the LLDP frame is count- ed and discarded. This situation is known as “Too Many Neighbors“ in the LLDP ...

Page 109 - : Click to refresh the PoE information manually.; Filtering Data Base; which cannot be categorized to some function type.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 109 Chapter 3: Configuration • Auto-refresh : Check the auto-refresh box to set the unit to refresh information automatically. • Icons, upper right of screen (Refresh) : Click to refresh the PoE information manually. 3.11 Filtering Data Ba...

Page 111 - Static MAC Table Configuration

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 111 Chapter 3: Configuration Static MAC Table Configuration The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries. The MAC table is sorted first by VLAN ID and then by MAC address. • Delet...

Page 112 - To Display MAC Address Table in the Web interface:

724-746-5500 | blackbox.com Page 112 724-746-5500 | blackbox.com Chapter 3: Configuration 3.11.2 Dynamic MAC Table Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries and is sorted first by VLAN ID then by MAC address. Web Interface To Display MAC Address Table...

Page 114 - To configure VLAN membership configuration in the Web interface:

724-746-5500 | blackbox.com Page 114 724-746-5500 | blackbox.com Chapter 3: Configuration 3.12.1 VLAN Membership The VLAN membership configuration for the selected switch can be monitored and modified here. Up to 4094 VLANs are supported. This page allows for adding and deleting VLANs as well as add...

Page 115 - and PVID affect Egress process.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 115 Chapter 3: Configuration 3.12.2 Ports User can configure all parameters to each port in VLAN Port Setting. These parameters involved two parts, Ingress rule and Egress rule. The function of Port Type, Ingress Filtering, Frame Type, and...

Page 116 - If ingress filtering is

724-746-5500 | blackbox.com Page 116 724-746-5500 | blackbox.com Chapter 3: Configuration Table 3-1: Port Types. Port Type Ingress Action Egress Action Unaware: The function of Unaware can be used for 802.1QinQ (double tag). When the port received untagged frames, an untagged frame obtains a tag (ba...

Page 118 - - Functional Conflicts between features.

724-746-5500 | blackbox.com Page 118 724-746-5500 | blackbox.com Chapter 3: Configuration 3.12.4 Port Status This function, Port Status, gathers the information of all VLAN status and reports it by the order of Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined. Web Interface To Display VLAN Port Sta...

Page 119 - Assigning Membership in Private VLANs

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 119 Chapter 3: Configuration 3.12.5 Private VLANs In a private VLAN, communication between ports is not permitted. A VLAN can be configured as a private VLAN. Assigning Membership in Private VLANs The Private VLAN membership configurations...

Page 120 - Port Isolation

724-746-5500 | blackbox.com Page 120 724-746-5500 | blackbox.com Chapter 3: Configuration Port Isolation Port Isolation provides for an apparatus and method to isolate ports on Layer 2 switches on the same VLAN to restrict traffic flow. The apparatus comprises a switch having said plurality of ports...

Page 121 - MAC-based VLANs group VLAN members by MAC address.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 121 Chapter 3: Configuration 3.12.6 MAC-Based VLAN MAC address-based VLAN decides the VLAN for forwarding an untagged frame based on the source MAC address of the frame. A most common way of grouping VLAN members is by port, hence the name...

Page 123 - Status

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 123 Chapter 3: Configuration Status This section shows MAC-based VLAN entries configured by various MAC-based VLAN users. Currently we support following VLAN User types: NAS : NAS provides port-based authentication, which involves communic...

Page 124 - LLC

724-746-5500 | blackbox.com Page 124 724-746-5500 | blackbox.com Chapter 3: Configuration 3.12.7 Protocol-Based VLAN This section describes Protocol-based VLAN. The switch supports protocol including Ethernet LLC SNAP Protocol. LLC The Logical Link Control (LLC) data communications protocol layer is...

Page 126 - Click Group Name VLAN configuration and add new entry.

724-746-5500 | blackbox.com Page 126 724-746-5500 | blackbox.com Chapter 3: Configuration Group to VLAN This section has instructions on how to map an already-configured Group Name to a VLAN for the selected switch. Web Interface To Display Group Name to VLAN mapping table configured in the Web inte...

Page 128 - Port Security

724-746-5500 | blackbox.com Page 128 724-746-5500 | blackbox.com Chapter 3: Configuration Parameter Description • Mode : Indicates the Voice VLAN mode operation. Disable the MSTP feature before enabling Voice VLAN to avoid the conflict of ingress filtering. Possible modes are: Enabled: Enable Voice ...

Page 130 - reachability

724-746-5500 | blackbox.com Page 130 724-746-5500 | blackbox.com Chapter 3: Configuration 3.14 GARP The Generic Attribute Registration Protocol (GARP) provides a generic framework in which devices in a bridged LAN, e.g. end stations and switches, can register and de-register attribute values, such a...

Page 131 - Timer Values

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 131 Chapter 3: Configuration • Timer Values : To set the GARP join timer, leave timer, and leave all timers, the unit is microseconds (ms). Three different timers can be configured on this page: - Join Timer: The default value for Join tim...

Page 134 - The default value of configuration is Disable.

724-746-5500 | blackbox.com Page 134 724-746-5500 | blackbox.com Chapter 3: Configuration 1. GVRP Mode This configuration is to enable/disable GVRP Mode on particular port locally. - Disable: Select to disable GVRP Mode on this port. - Enable: Select to enable GVRP Mode on this port. The default val...

Page 137 - QoS class

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 137 Chapter 3: Configuration Parameter Description • Port : The port number for which the configuration below applies. • QoS class : Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. There is a...

Page 138 - Figure 3-73. The QoS Ingress Port Policers Configuration screen.

724-746-5500 | blackbox.com Page 138 724-746-5500 | blackbox.com Chapter 3: Configuration Figure 3-73. The QoS Ingress Port Policers Configuration screen. Parameter Description • Port : The logical port for the settings contained in the same row. Click on the port number to configure the schedulers....

Page 143 - selected unit, as shown in the screen header.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 143 Chapter 3: Configuration 3.16.5 Port Tag Remarking This section provides an overview of QoS Egress Port Tag Remarking for all switch ports. Others the ports belong to the currently selected unit, as shown in the screen header. Web Inte...

Page 145 - Egress

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 145 Chapter 3: Configuration • Egress : Port Egress Rewriting can be one of these parameters: - Disable: No Egress rewrite. - Enable: Rewrite enable without remapped. - Remap: DSCP from analyzer is remapped and frame is remarked with remap...

Page 149 - currently selected unit, as shown in the page header.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 149 Chapter 3: Configuration 3.16.9 DSCP Classification This section describes how to configure and map DSCP value to a QoS Class and DPL value. Others the settings relate to the currently selected unit, as shown in the page header. Web In...

Page 152 - Frame Type can have any of the following values:

724-746-5500 | blackbox.com Page 152 724-746-5500 | blackbox.com Chapter 3: Configuration DMAC Type Destination MAC type: possible values are unicast (UC), multicast (MC), broadcast (BC) or ’Any.’ Frame Type can have any of the following values: 1. Any 2. Ethernet 3. LLC 4. SNAP 5. IPv4 6. IPv6 All ...

Page 154 - : Click to refresh the QCL information manually.

724-746-5500 | blackbox.com Page 154 724-746-5500 | blackbox.com Chapter 3: Configuration • Auto-refresh : Check the auto-refresh box to set the unit to refresh information automatically. • Resolve Conflict : Click it to resolve confict issues. • Icon, upper right of screen (Refresh) : Click to refr...

Page 155 - Thermal Protection

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 155 Chapter 3: Configuration 3.17 Thermal Protection This section describes how to inspect and configure current settings for controlling thermal protection. Thermal protection is used to protect the chip from becoming overheated. 3.17.1 C...

Page 156 - to be turned off via thermal protection.

724-746-5500 | blackbox.com Page 156 724-746-5500 | blackbox.com Chapter 3: Configuration NOTE: The temperature means the MAC and PHY chipset’s TA temperature, not the PSU device or environment temperature. Do not set environment temperature limitation value. • Port priorities : This indicates the p...

Page 158 - Time out

724-746-5500 | blackbox.com Page 158 724-746-5500 | blackbox.com Chapter 3: Configuration • Time out : It is the duration during which the collector receives samples, Once it is expired, the sampler stops sending the samples. It is through the management the value is set before it expires. The value...

Page 160 - To set loop protection:

724-746-5500 | blackbox.com Page 160 724-746-5500 | blackbox.com Chapter 3: Configuration 3.19 Loop Protection Loop protection detects the presence of traffic. When a switch becomes aware that a packet’s (looping protection frame) MAC address is the same as that of its own port, loop protection acti...

Page 162 - - Reduce the number of IP addresses needed on the network.

724-746-5500 | blackbox.com Page 162 724-746-5500 | blackbox.com Chapter 3: Configuration 3.20 Single IP Single IP Management (SIM) is a simple and useful method to optimize network utilities and management, designed to manage a group of switches as a single entity, called a SIM group. The SIM featu...

Page 164 - To configure the Easy Port in the Web interface:

724-746-5500 | blackbox.com Page 164 724-746-5500 | blackbox.com Chapter 3: Configuration 3.21 Easy Port Easy Port provides a convenient way to save and share common configurations. Use it to enable features and settings based on the location of a switch in the network and for mass configuration dep...

Page 165 - Port Security limit

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 165 Chapter 3: Configuration • Port Security limit : Set the Port security limit here. The default is 1. • Spanning Tree Admin Edge : Enable or disable the Spanning Tree Admin Edge function. • Spanning Tree BPDU Guard : Enable or disable t...

Page 166 - To configure the Mirror in the Web interface:

724-746-5500 | blackbox.com Page 166 724-746-5500 | blackbox.com Chapter 3: Configuration 3.22 Mirroring You can mirror traffic from any source port to a target port for real-time analysis. You can then attach a logic analyzer or RMON probe to the target port and study the traffic crossing the sourc...

Page 167 - Trap Event Severity

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 167 Chapter 3: Configuration 3.23 Trap Event Severity This function is used to set a Alarm trap and get the Event log. The Trap Events Configuration function is used to enable the switch to send out the trap information while pre-defined t...

Page 168 - SMTP Configuration

724-746-5500 | blackbox.com Page 168 724-746-5500 | blackbox.com Chapter 3: Configuration 3.24 SMTP Configuration When the switch perceives an alarm, use this function to enable the SMTP server to send you an alarm e-mail. Web Interface To configure the SMTP Configuration in the Web interface: 1. Cl...

Page 171 - configured ACEs will be lost when the mode is enabled.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 171 Chapter 3: Configuration Parameter Description • Mode of IP Source Guard Configuration : Enable the Global IP Source Guard or disable the Global IP Source Guard. All configured ACEs will be lost when the mode is enabled. • Port Mode Co...

Page 172 - : Used for calculating the allowed network with IP address.

724-746-5500 | blackbox.com Page 172 724-746-5500 | blackbox.com Chapter 3: Configuration • IP Mask : Used for calculating the allowed network with IP address. • MAC address : Valid source MAC address. • Adding new entry : Click to add a new entry to the Static IP Source Guard table. Specify the Por...

Page 182 - The Hold Time can be set to a number between 10 and 1,000,000 seconds.

724-746-5500 | blackbox.com Page 182 724-746-5500 | blackbox.com Chapter 4: Security Parameter Description • Mode : Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames. • Reauthentication Enabled : If checked, successfully ...

Page 200 - Access Management

724-746-5500 | blackbox.com Page 200 724-746-5500 | blackbox.com Chapter 4: Security 4.8 Access Management This section shows how to configure access management table of the Switch including HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage the Switch over an Ethernet LAN, or over the Internet. 4.8.1...

Page 201 - clear all new entries and revert to saved values.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 201 Chapter 4: Security • Buttons : - Save: Click to save changes. - Reset: Click to undo any changes made locally and revert to previously saved values. 4.8.2 Statistics This section shows you a detailed statistics of the Access Managemen...

Page 204 - Authentication Method; : The management client for which the configuration below applies.

724-746-5500 | blackbox.com Page 204 724-746-5500 | blackbox.com Chapter 4: Security 4.11 Authentication Method This section shows how to configure a user with authentication when logging in to the switch via one of the management client interfaces. Web Interface To configure a Authentication Method...

Page 209 - Chapter 5: Maintenance

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 209 Chapter 5: Maintenance 5.3.2 Save Start This section describes how to save the Switch Start configuration. Any current configuration files will be saved as XML format. Web Interface To configure a Save Start Configuration in the Web in...

Page 217 - Appendix: Glossary of Web-Based Management Terms; settings that can be shared by those devices for a link.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 217 Chapter 5: Maintenance Appendix: Glossary of Web-Based Management Terms ACE : ACE is an acronym for Access Control Entry. It describes access permission associated with a particular ACE ID. There are three ACE frame types (Ethernet Typ...

Page 220 - together to form a single logical port.

724-746-5500 | blackbox.com Page 220 724-746-5500 | blackbox.com Appendix: Glossary of Web-Based Management Terms IMAP is the protocol that IMAP clients use to communicate with the servers, and SMTP is the protocol used to transport mail to an IMAP server. The current version of the Internet Message...

Page 221 - remote device. The remote device is called a PD.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 221 Appendix: Glossary of Web-Based Management Terms MEP : MEP is an acronym for Maintenance Entity Endpoint and is an endpoint in a Maintenance Entity Group (ITU-T Y.1731). Mirroring : For debugging network problems or monitoring network ...

Page 222 - configured as a private VLAN.

724-746-5500 | blackbox.com Page 222 724-746-5500 | blackbox.com Appendix: Glossary of Web-Based Management Terms Policer : A policer can limit the bandwidth of received frames. It is located in front of the ingress queue. POP3 : POP3 is an acronym for Post Office Protocol version 3. It is a protoco...

Page 223 - protocol is now obsolete by RSTP.

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 223 Appendix: Glossary of Web-Based Management Terms protocols than can be distinguished by the 8-bit 802.2 Service Access Point (SAP) fields. SNAP supports identifying protocols by Ethernet type field values; it also supports vendor-priva...

Page 224 - User Priority

724-746-5500 | blackbox.com Page 224 724-746-5500 | blackbox.com Appendix: Glossary of Web-Based Management Terms UDP provides two services not provided by the IP layer. It provides port numbers to help distinguish different user requests and, optionally, a checksum capability to verify that the dat...

Page 225 - NOTES

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 225 NOTES

Page 228 - About Black Box; Tech support the; BLACK BOX

724-746-5500 | blackbox.com About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech Support ...