Black Box LMC7004A-R4 - Manuals

Black Box LMC7004A-R4 – Manual in PDF format online.

Manuals:

Manual Black Box LMC7004A-R4

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Configuration Instructions; 0/100 Autosensing Media Converters; Modes of Operation; 0/100 Autosensing Media Converter; ON

2 7 Configuration Instructions 10/100 Autosensing Media Converters features an 8-position DIP switch for configuring the unit.This switch is accessed through a cut-out in thebottom of the unit. After configuring the switch,power down the unit and then power up again forthe DIP switch changes to take...

Page 3 - Configuring every device in the media conversion for; Force; Please contact Black Box for more information.; Black Box Customer Service; Environmental; Integrated circuits and fiber optic components are extremely

• In Force 100 mode , the media converter converts 100Base-TX to 100Base-SX multi-mode or 100Base-FX single-mode fiber; 10 Mbpssignals are not accepted. There is no auto-negotiation in Force-100 mode. To enable Force-100 mode, set switch S7 to the ON position, with switches S6 and S8 in the OFF posi...

Page 4 - LED Indicators; NOTE; L E D A; Installation Troubleshooting; Connect the media converter to the twisted pair

4 5 L I N K F A U L T D E T E C T I O N F E A T U R E Link Fault Detection is only available when using Force-10 or Force-100 mode; it is not available in Auto-Negotiation mode. When LFD is enabled and the input link is down at one interface to the 10/100 Autosensing Media Converter , the transmitte...

Black Box Manuals