Black Box ACS250A-R2 - Manuals

Black Box ACS250A-R2 – Manual in PDF format online.

Manuals:

Manual

Manual Black Box ACS250A-R2

Summary

Page 2 - SERVSWITCHTM BRAND FIBER KVM EXTENDER II AND II-SM; TRADEMARKS USED IN THIS MANUAL; Machines Corporation.

2 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM TRADEMARKS USED IN THIS MANUAL Apple and Macintosh are registered trademarks of Apple Computer, Inc. IBM, PC/AT, and PS/2 are registered trademarks of International Business Machines Corporation. IntelliMouse and Microsoft are registered trademarks...

Page 4 - The extenders were tested in a typical configuration.; LASER-SAFETY STATEMENT; Chapter 1

4 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM EUROPEAN UNION DECLARATION OF CONFORMITY This is to certify that, when installed and used according to the instructions in thismanual together with the specified cables, the ServSwitch Brand Fiber KVMExtender II and II-SM are shielded against the g...

Page 5 - que el aparato eléctrico sea operado.

5 NOM STATEMENT NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para refer...

Page 7 - CONTENTS; Contents; Chapter

7 CONTENTS Contents Chapter Page 1. Specifications ........................................................................................ 8 2. Introduction ........................................................................................ 112.1 Overview .........................................

Page 8 - 25-μm multimode duplex fiberoptic cable

8 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 1. Specifications Cable Required: ACS250A-R2: 50/125-µm or (to lesser distances) 62.5/ 125-µm multimode duplex fiberoptic cable; ACS251A-R2: 9/125-µm single-mode duplex fiberoptic cable Compliance: CE; FCC Part 15 Subpart B Class A, IC Class/classe...

Page 9 - CHAPTER 1: Specifications; Between extender’s local and remote units:

9 CHAPTER 1: Specifications Maximum Distance: Between extender’s local and remote units: ACS250A-R2: Over 62.5-µm cable: 720 ft. (219.5 m);Over 50-µm cable: 1310 ft. (399.3 m); ACS251A-R2: 6.2 mi. (10 km) User Controls: None Connectors: On local unit: Front-mounted: (4) 6-pin mini-DIN female: (1) fo...

Page 10 - Local unit: LED is steadily lit during normal operation,

10 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM Indicators: (1) Front-mounted green LED on each unit: Local unit: LED is steadily lit during normal operation, flashes if unit is powered but no video signal is presentat VGA input; Remote unit: LED is steadily lit during normal operation, flashes...

Page 11 - CHAPTER 2: Introduction; There are two models of the extender:

11 CHAPTER 2: Introduction 2. Introduction 2.1 Overview There are many KVM extenders available, but until now many of them have usedanalog image transmission, which inherently degrades image quality (especiallyover long distances and at high video resolutions). The ServSwitch Brand Fiber KVM Extende...

Page 13 - CHAPTER 3: Compatibility and Signal Processing; Compatibility and; accept

13 CHAPTER 3: Compatibility and Signal Processing 3. Compatibility and Signal Processing This chapter discusses technical details of how the ServSwitch Brand Fiber KVMExtender II and II-SM process I/O signals, and how that processing affectscompatibility with various equipment. 3.1 Video Processing ...

Page 14 - • DOS-mode resolutions will be output at a refresh rate of 85 Hz.; Mouse Compatibility; IntelliMouse

14 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM The brightness and contrast of the video signal are adjusted automatically before digitizing the signal. This ensures the best possible video quality without requiringconfiguration or adjustment by the user. When the local unit detects that the CP...

Page 16 - Chapter 3; not

16 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 4. Installation 4.1 Guidelines and Limitations for Attaching Equipment This section discusses a few things you need to keep in mind about the types ofdevices you can attach to a ServSwitch Brand Fiber KVM Extender II or II-SM, inaddition to those ...

Page 18 - NOTE; unit’s HD15 female connector labeled “CPU Video.”

18 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 4.3 Installing the Local Unit and Local Devices Place the local unit on a flat surface within about 10 ft. (3 m) of a working ACoutlet and 6 ft. (1.8 m) of your local CPU and any local user-station equipment. NOTE I t i s a l s o p o s s i b l e t...

Page 19 - CHAPTER 4: Installation; labeled with the word “Local” and a mouse icon.

19 CHAPTER 4: Installation • Plug any local mouse into the local unit’s 6-pin mini-DIN female connector labeled with the word “Local” and a mouse icon. Make a last pair of attachments to the connectors on the local unit’s rear panel: • Attach the SC male connectors at the local-unit end of your dupl...

Page 20 - • Plug the remote mouse into the remote unit’s 6-pin mini-DIN female

20 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 4.4 Installing the Remote Unit and Remote Devices Place the remote unit on a flat surface (or rackmount it—see the Note on page 17)within about 10 ft. (3 m) of a working AC outlet and 6 ft. (1.8 m) of your remoteuser-station equipment. Making sure...

Page 22 - Chapter 6

22 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 4.5 Finishing Your Installation To complete your extender installation and begin operating the system, plug inand turn on the remote monitor. A gray box should appear on the screen with thewords “NO SIGNAL” in it. (If you see a red box that says “...

Page 24 - do not attempt to alter or repair the unit; Shipping and Packaging; If you need to transport or ship your extender:

24 SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM 6. Troubleshooting 6.1 Calling Black Box If you determine that your ServSwitch Brand Fiber KVM Extender II or II-SM ismalfunctioning, do not attempt to alter or repair the unit . It has no user-serviceable components. Contact Black Box Technical S...

Page 25 - DISCLAIMERS

25 DISCLAIMERS DISCLAIMERS While every precaution has been taken in the preparation of this manual, neitherthe manufacturer nor its authorized agents assume any responsibility for errors oromissions. Nor do they assume any liability for damages resulting from the use ofthe information contained here...

Page 26 - NOTES