BILLY GOAT TKD505H, TKD505ICQ - Manuals

Page 2 - Part No. 890313 Form No. F010396D; DO NO; DO; The Engine Exhaust from this product contains chemicals known

Part No. 890313 Form No. F010396D Page 2 of 12 IN IN IN IN IN THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS W W W W W ARNING OR CA ARNING OR ...

Page 3 - PUT OIL IN ENGINE BEFORE STARTING; ASSEMBLY; PACKING CHECKLIST; GENERAL SAFETY; QUICK DISCONNECT; Honda

Part No. 890313 Form No. F010396D Page 3 of 12 PUT OIL IN ENGINE BEFORE STARTING Read all safety and operating instructionsbefore assembling or starting this unit. Debris Bag890306 C h e c k Engine Manual Per Model These items should be included in your carton. Ifany of these parts are missing, cont...

Page 4 - Manual; Start; CONTROLS; D A N G E R; INSTRUCTION LABELS; DANGER

Part No. 890313 Form No. F010396D Page 4 of 12 Owner's Manual Literature KD / TKD Accessories C h e c k Owner's Manual 890313 Literature KD / TKD Accessories 890317 C h e c k Literature Check-list C h e c k EU Declaration of Conformity & EU Distributor List 890262 EU Declaration of Conformity &a...

Page 5 - Use caution when using chipper; Adjustment; Under normal circumstances, allow time for machine; VACUUM NOZZLE HEIGHT ADJUSTMENT:; is; djust nozzle close to debris,; PUT OIL IN ENGINE BEFORE STARTING.; Your; TERMITE; chipper is designed to process tree branches; Maximum; Operation; STARTING; VACUUMING OPERATION; CLEARING A CLOGGED CHIPPER HOPPER; CHIPPING OPERATION

Part No. 890313 Form No. F010396D Page 5 of 12 Nozzle Height Fine Adjustment For Hard SurfaceUse: Optimum nozzle height is 1/2" (12.7mm) above ground with engine not running. To adjust height, loosen screws (item 37), onquad plate. Prop front of nozzle up 1.0" (25.4mm) above ground.Keeping w...

Page 6 - OPERATION; continued; Note: Frequently empty debris to prevent bag overloading with; DO NOT place bag on or near hot surface, such as engine.; Run machine at idle to quarter throttle.; DO NOT leave debris in bag while in storage.; DEBRIS BAG

Part No. 890313 Form No. F010396D Page 6 of 12 OPERATION continued 16 16 16 16 16 Note: Frequently empty debris to prevent bag overloading with more weight than you can lift.An optional bag and dust cover is available for use where debris willbe vacuumed in dusty conditions (see Optional Accessories...

Page 7 - Never store engine indoors or in enclosed poorly venti-; Do not store with debris in bag.; TAMPER; Tamper Storage Position

Part No. 890313 Form No. F010396D Page 7 of 12 Before turning machine off, use the Tamper to slowly pushremaining pieces of wood through the chipper. This canprevent any remaining wood from jamming in the chipperwhen machine is turned off.Do not leave tamper on the ground, store tamper in thechipper...

Page 8 - MAINTENANCE; CHIPPER BLADE REMOVAL AND SHARPENING; Chipper blades are normal replaceable wear items.; Chipper blade is sharp.; CAUTION: Be careful to avoid heat buildup in the; INCORRECT; IMPELLER REMOVAL and CHIPPER ADJUSTMENT; Wait for engine to cool and disconnect spark plug.; Using a penetrating oil can help loosen a stuck impeller.; IMPELLER REMOVAL

Part No. 890313 Form No. F010396D Page 8 of 12 MAINTENANCE CHIPPER BLADE REMOVAL AND SHARPENING Depending on the type and amount of wood being chipped, thechipper blade will eventually get dull, losing it’s cutting ability.Evidence of a dull blade is a noticeably reduced chipping ability or arough c...

Page 9 - Service Performed; Maintenance Operation; Maintenance Schedule

Part No. 890313 Form No. F010396D Page 9 of 12 MAINTENANCE continued IMPELLER REMOVAL continued Date ofService Service Performed MAINTENANCE HISTORY Engine (See Engine Manual) Check for excessive vibration Clean Debris Bag Check bag strap tightness Inspect for loose parts Maintenance Operation Follo...

Page 10 - PARTS DRAWING

Part No. 890313 Form No. F010396D Page 10 of 12 18 18 18 18 18 PARTS DRAWING TKD505H, TKD505H, TKD505H, TKD505H, TKD505H, TKD505ICQ TKD505ICQ TKD505ICQ TKD505ICQ TKD505ICQ

Page 11 - PARTS

Part No. 890313 Form No. F010396D 1 TURF QUICK DEBRIS BAG (service) 890307 1 890307 1 2 THROTTLE ASSEMBLY (INCL. 1 ea items 4, 10) 810135 1 810135 1 3 WASHER - FLAT FENDER (11/32 x 1-1/4 x 0.05) *8172020 6 *8172020 6 4 NUT LOCK (1/4 - 20 ) *8160001 6 *8160001 6 5 SCREW CAP ( 1/4 - 20 x 1-1/2 HEX ) *...

Page 12 - PARTS LIST CONTINUED; Engine Service and Warranty; Contact your nearest engine manufacturer's autho-; Serial Plate

Part No. 890313 Form No. F010396D Page 12 of 12 Will not vacuum or has poor vacuum perfor- mance. Poor chipping performance. PARTS LIST CONTINUED ( Continued from page 11 ) 787980818283 CONNECTOR BAG QUICK 890176 1 890176 1 84 LABEL READ OWNER'S MANUAL 890301 1 890301 1 85 TAMPER 890229 1 890229 1 8...