BILLY GOAT TKD502SP - Manuals

Page 2 - DO NO; DO

Part No. 890207 Form No. F021795E SAFETY 2 THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS THIS SYMBOL MEANS W W W W W ARNING OR CA ARNING OR CA ARNING OR CA ARNING OR CA ARNING OR CAUTION. UTION. UTION. UTION. UTION. DEA DEA DEA DEA DEATH, TH, TH, TH, TH, PERSONAL INJUR PERS...

Page 3 - Part No. 890207 Form No. F021795E; PUT OIL IN ENGINE BEFORE STARTING.; QUICK DISCONNECT; GENERAL SAFETY; PACKING CHECKLIST

Part No. 890207 Form No. F021795E Page 3 of 12 For your safety and the safety of others, these directions should be followed: Use of Ear Protection is recommended whileoperating this machine. Do not operate this machine without first readingowner's manual and engine manufacturer's manual. Use of Eye...

Page 4 - Strap Bag Support; Literature Checklist; Start; CONTROLS; ENGINE LABELS

Part No. 890207 Form No. F021795E EVERY 10 HOURS 830502 OIL CHAIN Page 4 of 12 4 Strap Bag Support 900642 Qty. 1 900813 Qty. 2 Clamp Cable 1" 9 Owner's Manual Literature Parts Bag Literature KD / TKD Accesso- ries Check Owner's Manual 890207 Literature Parts Bag 890267 Check Literature KD / TKD ...

Page 5 - Under normal circumstances, allow time for machine; Use caution when using chipper; Your; TERMITE; chipper is designed to process tree branches; VACUUM NOZZLE HEIGHT ADJUSTMENT:; is; djust nozzle close to debris,; PRIMER: Push primer per engine instructions.; Maximum; OPERATION; CHIPPING OPERATION; CLEARING A CLOGGED CHIPPER HOPPER; VACUUMING OPERATION; STARTING

Part No. 890207 Form No. F021795E Page 5 of 12 OPERA TION 5 Under normal circumstances, allow time for machine to clear all wood from chipper hopper before stopping engine. Otherwise, remaining pieces of wood will jam insideof chipper when engine stops. See Tamper on page 7. Disconnect spark plug wi...

Page 6 - DO NOT place bag on or near hot surface, such as engine.; Run machine at idle to quarter throttle.; DO NOT leave debris in bag while in storage.; continued; MULCH; Push Model Shown

Part No. 890207 Form No. F021795E By removing the debris bag, quick disconnect and leaving the bagsupport tray in place, the operator’s handle can be folded down tosave space when transporting or storing unit (see fig 4). Page 6 of 12 OPERA TION 6 (fig. 3) Note: Frequently empty debris to prevent ba...

Page 7 - Handle; Never store engine indoors or in enclosed poorly ventilated; store tamper in the chipper hopper.; Do not store with debris in bag.; PROPULSION

Part No. 890207 Form No. F021795E 16. 16. 16. 16. 16.12 12 12 12 12 Page 7 of 12 OPERA TION 7 Bail DownDisengagesDrive Handle Bail GROUND SPEED can be varied by applying slight downwardpressure to handle during operation (to allow drive wheelspar tial slippage) or by changing the engine rpm. For imp...

Page 8 - MAINTENANCE; MAINTENANCE 8; CHIPPER BLADE REMOVAL AND SHARPENING; Chipper blades are normal replaceable wear items.; DANGER; Chipper blade is sharp.; CAUTION: Be careful to avoid heat buildup; INCORRECT; Wait for engine to cool and disconnect spark plug.; Using a penetrating oil can help loosen a; IMPELLER REMOVAL; IMPELLER REMOVAL and CHIPPER ADJUSTMENT

Part No. 890207 Form No. F021795E Page 8 of 12 MAINTENANCE MAINTENANCE 8 CHIPPER BLADE REMOVAL AND SHARPENING Depending on the type and amount of wood being chipped, thechipper blade will eventually get dull, losing it’s cutting ability.Evidence of a dull blade is a noticeably reduced chipping abili...

Page 9 - and; CHIPPER; Rod; Maintenance Schedule; CLUTCH ADJUSTMENT; DRIVE

Part No. 890207 Form No. F021795E Page 9 of 12 MAINTENANCE 9 MAINTENANCE continued 19. If chipper blade properly clears anvil surface, proceed to step20. If not, return to (step 14) and add or subtract shim washers asneeded to obtain a correct gap. 20. Reinstall engine, impeller and jackshaft assemb...

Page 10 - PARTS DRAWING

Part No. 890207 Form No. F021795E R Page 10 of 12 18 18 18 18 18 PARTS DRAWING P A R T S D R A WING 10 TKD502SP TKD502SP TKD502SP TKD502SP TKD502SP

Page 12 - TS LIST 10; Engine Service and Warranty; Contact your nearest engine manufacturer's authorized; Serial Plate; WARRANTY PROCEDURE

Part No. 890207 Form No. F021795E Page 12 of 12 12 Part No. Engine stalls or labors when chipping. Feeding branches into chipper too rapidly. Engine service may be required. Feed branches at a slow er rate. Service engine. Poor chipping performance. Extremely hard wood. Dull or damaged chipper blade...