BILLY GOAT MV650SPH - Manuals

BILLY GOAT MV650SPH – Manual in PDF format online.

Manuals:

Manual

Manual BILLY GOAT MV650SPH

Summary

Page 2 - MV Vacuum; CONTENTS

Part No 840099 2 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT ® MV Vacuum . Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operat...

Page 4 - is recommended when operating this equipment.

Part No 840099 4 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates...

Page 5 - MV650SPH Self-Propelled Vacuum Owner’s Manual

Form No F082206A 5 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refuel...

Page 7 - MV Vacuum. If any labels are damaged or missing,; LABELS; HONDA; Throttle

Form No F082206A 7 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT ® MV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List an...

Page 8 - MV Vacuum Assembly Drawing

Part No 840099 8 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual MV Vacuum Assembly Drawing

Page 10 - READ

Part No 840099 10 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual ASSEMBLY INSTRUCTIONS Your BILLY GOAT ® MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed o...

Page 11 - It is easier to do this with nozzle door closed.; HERE

Form No F082206A 11 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual 4. Attach upper handle brace to lower handle using corresponding hardware. Then repeat this step on the other side. - Two 1/2” wrenches. 5. Attach rod end (164) to the nozzle door rod then secure in place by tightening ...

Page 13 - PERATOR; CHECK

Form No F082206A 13 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual O PERATOR C ONTROLS The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow both handlebars to be grasped firmly, which allows sufficient leverage t...

Page 14 - PULL STARTER CORD; slowly until resistance is felt. Then pull cord rapidly to avoid; ACUUM; NOTE

Part No 840099 14 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual 3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback. 4. Move throttle contro...

Page 15 - Nozzle fully opened. This is ideal for turf application

Form No F082206A 15 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUM N OZZLE D OOR A DJUSTMENT The vacuum nozzle door adjusts for the maximum performance under various applications. Nozzle fully opened. This is ideal for turf application Nozzle half way opened. This is ideal for ...

Page 16 - ACUUMING; Gear Shift Lever; HUT; Release Drive Clutch Lever to disengage the drive.

Part No 840099 16 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUMING O PERATION This machine is designed for vacuuming leaves, grass clippings, and other types of organic litter. Debris mixed with cans, bottles, and small amounts of sand can be vacuumed; however, it is not this...

Page 17 - LEARING A; DISCONNECT; spark plug wire before servicing unit.; WEAR; durable gloves. Clog may contain sharp materials.; EBRIS; Debris bags are normal replaceable wear items.; DO NOT place bag on or near hot surface; (see Safety Warnings

Form No F082206A 17 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual C LEARING A C LOGGED N OZZLE DISCONNECT spark plug wire before servicing unit. 1. Shut engine off and wait for impeller to stop completely. 2. Disconnect spark plug wire. 3. Wearing durable gloves, remove clog. WEAR dur...

Page 19 - ERIODIC; LOCATION 1; Apply lubricant on the zinc die cast barrel.

Form No F082206A 19 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual MAINTENANCE P ERIODIC M AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 25 Hours Every 50 Hours Every 100-150 Hours Inspect fo...

Page 20 - Using a penetrating oil can help loosen a stuck

Part No 840099 20 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual I MPELLER R EMOVAL READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools required: - 1/2” socket, 3/8” drive - ratchet, 3/8” - drive extension, 3/8” drive - universal...

Page 21 - cable adjustment; handle; Tighten; RIVE

Form No F082206A 21 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual cable adjustment 4" from handle Tighten Loosen 2. Engage the clutch lever then pull the unit back until it stops freewheeling. The clutch lever should engage around 2 5/16” of travel or 4 inches from tip of lever to...

Page 23 - IRING; Bag Switch Circuit Schematic Diagram; TROUBLESHOOTING; Problem

Form No F082206A 23 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual W IRING D IAGRAMS Bag Switch Circuit Schematic Diagram TROUBLESHOOTING Problem Possible Cause Solution Will not vacuum or has poor vacuum performance. · Dirty or full debris bag or filter. · Clean debris bag and filter....

Page 24 - Should a BILLY GOAT

Part No 840099 24 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual ENGINE MAINTENANCE AND REPAIR Refer to the engine manufacturer’s manual for maintenance and service information. Warranty coverage on the engine is the responsibility of the engine manufacturer. If your engine requires w...

Page 25 - Date Service

Form No F082206A 25 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual MAINTENANCE RECORD Date Service Performed

Page 26 - Nozzle Assembly

Part No 840099 26 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual ILLUSTRATED PARTS LIST Nozzle Assembly Figure 1

Page 27 - PART; 40155 BRACKET HGT ADJ W A W /LABEL MV VAC

Form No F082206A 27 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual Nozzle Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION MV650SPH QTY. 1 350127 YOKE 1/2 - 20 1 2 350128 PIN YOKE 1/2" 1 3 8024060 BOLT CARRIAGE 3/8-16X1 1/2" ZP 2 4 8172009 W ASHER 3/8" SAE ZP 2 5 816104...

Page 28 - Drive /Rear Axle Assembly

Part No 840099 28 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual Drive /Rear Axle Assembly Figure 2

Page 30 - MV650SPH Self-Propelled Vacuum Owner’s; Manual; Engine Assembly

Part No 840099 30 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual Engine Assembly Figure 3

Page 31 - ITEM

Form No F120905A 31 Part No 840099 MV650SPH Self-Propelled Vacuum Owner’s Manual Engine Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION M V650SPH QTY. 50 840069 ENGINE HONDA 6.5 VERTICAL GSV190 1 51 840136 IMPELLER ASSEMBLY SP MV VAC 1 52 840107 PLATE TOP W A SP MV VAC 1 53 840205 HOUSING PLAST...

Page 32 - Hood Assembly

Part No 840099 32 Form No 082206A MV650SPH Self-Propelled Vacuum Owner’s Manual Hood Assembly Figure 4