BILLY GOAT MV600SPE - Manuals

BILLY GOAT MV600SPE – Manual in PDF format online.

Manuals:

Manual

Manual BILLY GOAT MV600SPE

Summary

Page 2 - Go to

Part No 840245 2 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual CONTENTS Specifications and Sound/Vibration ................................................................................................................... 3 Instruction Labels ..........................................

Page 3 - MV650SPH Self-Propelled Vacuum Owner’s Manual; MV 650 SERIES SPECIFICATIONS

Form No F060711D 3 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual MV 650 SERIES SPECIFICATIONS MV650SPH MV600SPE Engine Type Honda GSV190AA1A Briggs and Stratton 122MO70110F1 Horsepower 6.5 (4.85 kW) 6.25 (4.66 kW) Fuel Capacity 1.6 qt (1.5 L) 1qt (.9L) Oil Capacity 0.58 qt (0.54L) 0.6...

Page 4 - MV Vacuum. If any labels are damaged or missing,; LABELS; HONDA; Throttle

Part No 840245 4 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT ® MV Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List an...

Page 5 - MV Vacuum Assembly Drawing

Form No F060711D 5 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual MV Vacuum Assembly Drawing

Page 7 - ASSEMBLY INSTRUCTIONS; MV Vacuum; READ

Form No F060711D 7 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual ASSEMBLY INSTRUCTIONS Your BILLY GOAT ® MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed o...

Page 8 - It is easier to do this with nozzle door closed.; HERE

Part No 840245 8 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual 4. Attach upper handle brace to lower handle using corresponding hardware. Then repeat this step on the other side. - Two 1/2” wrenches. 5. Attach rod end (164) to the nozzle door rod then secure in place by tightening j...

Page 9 - CHECK

Form No F060711D 9 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual OPERATION O PERATOR C ONTROLS The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow both handlebars to be grasped firmly, which allows sufficient l...

Page 10 - For Electric models; Choke if needed; NOTE

Part No 840245 10 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual 3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback. 4. Move throttle contr...

Page 11 - ACUUM; Nozzle fully opened. This is ideal for turf application

Form No F060711D 11 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUM N OZZLE D OOR A DJUSTMENT The vacuum nozzle door adjusts for the maximum performance under various applications. Nozzle fully opened. This is ideal for turf application Nozzle half way opened. This is ideal for ...

Page 12 - ACUUMING; Gear Shift Lever; HUT; Release Drive Clutch Lever to disengage the drive.

Part No 840245 12 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUMING O PERATION This machine is designed for vacuuming leaves, grass clippings, and other types of organic litter. Debris mixed with cans, bottles, and small amounts of sand can be vacuumed; however, it is not thi...

Page 13 - LEARING A; DISCONNECT; spark plug wire before servicing unit.; WEAR; durable gloves. Clog may contain sharp materials.; EBRIS; Debris bags are normal replaceable wear items.; DO NOT place bag on or near hot surface; (see Safety Warnings

Form No F060711D 13 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual C LEARING A C LOGGED N OZZLE DISCONNECT spark plug wire before servicing unit. 1. Shut engine off and wait for impeller to stop completely. 2. Disconnect spark plug wire. 3. Wearing durable gloves, remove clog. WEAR dur...

Page 14 - ERIODIC; Drive Belt P/N 840066, Original equipment replacement belt; LOCATION 1; Apply lubricant on the zinc die cast barrel.

Part No 840245 14 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual MAINTENANCE P ERIODIC M AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 25 Hours Every 50 Hours Every 100-150 Hours Inspect fo...

Page 15 - Using a penetrating oil can help loosen a stuck

Form No F060711D 15 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual I MPELLER R EMOVAL READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools required: - 1/2” socket, 3/8” drive - ratchet, 3/8” - drive extension, 3/8” drive - universa...

Page 16 - cable adjustment; handle; Tighten; RIVE

Part No 840245 16 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual cable adjustment 4" from handle Tighten Loosen Procedure: 1. Wait for engine to cool and DISCONNECT SPARK PLUG! 2. Engage the clutch lever then pull the unit back until it stops freewheeling. The clutch lever should...

Page 18 - IRING; Bag Switch Circuit Schematic Diagram; TROUBLESHOOTING; Problem

Part No 840245 18 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual W IRING D IAGRAMS Bag Switch Circuit Schematic Diagram TROUBLESHOOTING Problem Possible Cause Solution Will not vacuum or has poor vacuum performance. · Dirty or full debris bag or filter. · Clean debris bag and filter....

Page 19 - ILLUSTRATED PARTS LIST; Nozzle Assembly

Form No F060711D 19 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual ILLUSTRATED PARTS LIST Nozzle Assembly Figure 1

Page 20 - PART

Part No 840245 20 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual Nozzle Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION MV650SPH QTY. MV600SPE QTY. 1 350127 YOKE 1/2 - 20 1 1 2 350128 PIN YOKE 1/2" 1 1 3 8024060 BOLT CARRIAGE 3/8-16X1 1/2" ZP 2 2 4 8172009 W ASHER 3/8...

Page 21 - Drive /Rear Axle Assembly

Form No F060711D 21 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Drive /Rear Axle Assembly Figure 2

Page 23 - Engine Assembly

Form No F060711D 23 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Engine Assembly Figure 3

Page 24 - Engine Assembly Parts List; ITEM

Part No 840245 24 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual Engine Assembly Parts List ITEM NO. PART NUMBER DESCRIPTION MV650SPH QTY. MV600SPE QTY. 50 840069 ENGINE HONDA 6.5 VERTICAL GSV190 1 1 51 840136 IMPELLER ASSEMBLY SP MV VAC 1 1 52 840107 PLATE TOP W A SP MV VAC 1 1 53 8...

Page 25 - Hood Assembly

Form No F060711D 25 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Hood Assembly Figure 4