BILLY GOAT KD510 - Manuals - manualsarea.com

Page 2 - Part No. 890394 Form No. F011398B; IN THE INTEREST OF SAFETY; DO NOT transport unit with fuel in tank.; VIBRATION; SOUND; TABLE OF CONTENTS; The Engine Exhaust from this product contains chemicals known

Part No. 890394 Form No. F011398B Page 2 of 12 IN THE INTEREST OF SAFETY THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTYDAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & EN-GINE MA...

Page 3 - Part No. 890394 Form No. F011398B; PUT OIL IN ENGINE BEFORE STARTING; ASSEMBLY; PACKING CHECKLIST; GENERAL SAFETY; QUICK DISCONNECT; Honda

Part No. 890394 Form No. F011398B Page 3 of 12 PUT OIL IN ENGINE BEFORE STARTING Read all safety and operating instructionsbefore assembling or starting this unit. Debris Bag890306 TKD C h e c k Engine Manual Per Model These items should be included in your carton. Ifany of these parts are missing, ...

Page 4 - Manual; Start; CONTROLS; D A N G E R; INSTRUCTION LABELS; DANGER; UPD

Part No. 890394 Form No. F011398B Page 4 of 12 Owner's Manual Literature KD / TKD Accessories C h e c k Owner's Manual 890394 Literature KD / TKD Accessories 890409 C h e c k Literature Check-list C h e c k EU Declaration of Conformity & EU Distributor List 890393 EU Declaration of Conformity &a...

Page 5 - VACUUM NOZZLE HEIGHT ADJUSTMENT:; is; djust nozzle close to debris,; PUT OIL IN ENGINE BEFORE STARTING.; Operation; STARTING; VACUUMING OPERATION; Use caution when using chipper; Your; TERMITE; chipper is designed to process tree branches; CLEARING A CLOGGED CHIPPER HOPPER; Under normal circumstances, allow time for machine; CHIPPING OPERATION; Maximum

Part No. 890394 Form No. F011398B Page 5 of 12 VACUUM NOZZLE HEIGHT ADJUSTMENT: is raised and lowered by pulling slightly upward on handleand pulling height adjust rod (item 23) up at left rear ofmachine. FOR MAXIMUM PICKUP: A djust nozzle close to debris, but without blocking airflow into the nozzl...

Page 6 - OPERATION; continued; Note: Frequently empty debris to prevent bag overloading with; Run machine at idle to quar ter throttle.; DO NOT leave debris in bag while in storage.; DEBRIS BAG

Part No. 890394 Form No. F011398B Page 6 of 12 OPERATION continued 16 16 16 16 16 Note: Frequently empty debris to prevent bag overloading with more weight than you can lift.An optional bag and dust cover is available for use where debris will bevacuumed in dusty conditions (see Optional Accessories...

Page 7 - Never store engine indoors or in enclosed poorly venti-; Do not store with debris in bag.; TAMPER; Tamper Storage Position

Part No. 890394 Form No. F011398B Page 7 of 12 Before turning machine off, use the Tamper to slowly pushremaining pieces of wood through the chipper. This canprevent any remaining wood from jamming in the chipperwhen machine is turned off.Do not leave tamper on the ground, store tamper in thechipper...

Page 8 - MAINTENANCE; CAUTION: Be careful to avoid heat buildup in the; INCORRECT; Wait for engine to cool and disconnect spark plug.; Using a penetrating oil can help loosen a stuck impeller.

Part No. 890394 Form No. F011398B Page 8 of 12 MAINTENANCE CHIPPER BLADE REMOVAL AND SHARPENING Depending on the type and amount of wood being chipped, thechipper blade will eventually get dull, losing it’s cutting ability.Evidence of a dull blade is a noticeably reduced chipping ability or arough c...

Page 9 - IMPELLER REMOVAL; Service Performed; Maintenance Operation; Maintenance Schedule

Part No. 890394 Form No. F011398B Page 9 of 12 MAINTENANCE continued IMPELLER REMOVAL continued Date ofService Service Performed MAINTENANCE HISTORY Engine (See Engine Manual) Check for excessive vibration Clean Debris Bag Check bag strap tightness Inspect for loose parts Maintenance Operation Follo...

Page 10 - PARTS DRAWING

Part No. 890394 Form No. F011398B Page 10 of 12 R 18 18 18 18 18 PARTS DRAWING KD510H, KD510HS, KD510, KD510IC, TKD510IC, TKD510H

Page 12 - PARTS LIST CONTINUED; TROUBLESHOOTING; Engine Service and Warranty

Part No. 890394 Form No. F011398B Page 12 of 12 Will not vacuum or has poor vacuum perfor-mance. Poor chipping performance. PARTS LIST CONTINUED ( Continued from page 11 ) TROUBLESHOOTING Before Requesting Service Review These Suggestions Engine stalls or labors when chipping. Feed branches at a slo...