BILLY GOAT BG1002 - Manuals

Page 2 - Part No. 800012 Form No. F021402A; TABLE OF CONTENTS; VIBRATION; VIBRATION LEVEL 8.0 g; SOUND; IN THE INTEREST OF SAFETY; DO NOT transport unit with fuel in tank.; The Engine Exhaust from this product contains chemicals known; Sound level of 97 dBA at operator position

Part No. 800012 Form No. F021402A Page 2 of 12 THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTYDAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & EN-GINE MANUAL.” ○ ○ ○ ○ ○ ○ ○ SAFET...

Page 3 - Part No. 800012 Form No. F021402A; GENERAL SAFETY; ·DO NOT start or operate machine with debris bag zipper open.; PUT OIL IN ENGINE BEFORE STARTING.; ASSEMBLY; PACKING CHECK LIST

Part No. 800012 Form No. F021402A BG V ACUUM 95 99 5 Page 3 of 12 For your safety and the safety of others, these directions should be followed: Use of Ear Protection is recommended whileoperating this machine. Do not operate this machine without first readingowner's manual and engine manufacturer's...

Page 4 - INSTRUCTION LABELS; CONTROLS; WARNING; ENGINE LABELS; Throttle Control 8 HP; Stop; CAUTION; Self Propelled Units Only; Start; DANGER; Manual; Manual; Literature; Literature Checklist; WARNING

Part No. 800012 Form No. F021402A WARNING 900327 Page 4 of 12 INSTRUCTION LABELS CONTROLS These labels should be included on your Vacuum. If any ofthese labels are damaged, replace them before putting thisequipment into operation. Item and part numbers are given tohelp in ordering replacement labels...

Page 5 - OPERATION; VACUUM NOZZLE HEIGHT ADJUSTMENT:; Is; djust nozzle close to debris,; NOTE; VACUUMING OPERATION; STARTING; ENGINE: See engine manufacturer’s instructions; Note: Frequently empty debris to prevent bag overloading with; more weight than you can lift.; (see Safety Warnings; Run machine at idle to quarter throttle.; DO NOT leave debris in bag while in storage.; DEBRIS BAG; Debris bags are normal replaceable wear items.; Turn engine off and wait for impeller to; OPTIONAL HOSE KIT

Part No. 800012 Form No. F021402A Page 5 of 12 OPERATION 16 16 16 16 16 INTENDED USE: This machine is designed for vacuumingleaves, grass clippings and other types of organic litter.Debris mixed with cans, bottles and small amounts of sandcan be vacuumed; however, it is not this machine's primarypur...

Page 6 - PARTS DRAWING

Part No. 800012 Form No. F021402A Page 6 of 12 PARTS DRAWING 18 18 18 18 18 BG1002, BG1002SP Denotes parts found inParts Bag Assembly(shown on page 4). BG V ACUUM TO UPPERHANDLE TO UPPERHANDLE

Page 9 - continued; PROPULSION; self propelled only; Do not store with debris in bag.; STORAGE; PULL TO ENGAGE CLUTCH

Part No. 800012 Form No. F021402A Page 9 of 12 OPERATION continued 16 16 16 16 16 PROPULSION self propelled only 16.6 16.6 16.6 16.6 16.6 PROPULSION: BG self-propelled vacuums are equippedwith 1 forward gear, neutral and reverse. With the enginerunning, the bail in released position and brake in onp...

Page 10 - MAINTENANCE; IMPELLER REMOVAL; Remove nozzle and caster wheel brackets from the; Maintenance Schedule; ENGINE

Part No. 800012 Form No. F021402A Page 10 of 12 Use only a qualified mechanic forany adjustments, disassembly orany kind of repair . DISCONNECT SPARK PLUG WIREBEFORE SERVICING UNIT. WARNING: TO AVOID PERSONAL INJURY, ALWAYSTURN MACHINE OFF, MAKE SURE ALL MOVINGPARTS COME TO A COMPLETE STOP. RECONNEC...

Page 11 - DRIVE; SP MODELS ONLY; BELT ADJUSTMENT

Part No. 800012 Form No. F021402A Page 11 of 12 MAINTENANCE continued 17 17 17 17 17 17.3 DRIVE SP MODELS ONLY Chains and Belts are normal replaceable wear items. A newchain should not be used on worn sprockets. Sprocketsshould be replaced when replacing chains. BELT ADJUSTMENT As V-belt wears, adju...

Page 12 - TROUBLESHOOTING; Engine Service and Warranty; Serial Plate; Reference: Label CAUTION; WARRANTY PROCEDURE

Part No. 800012 Form No. F021402A Page 12 of 12 Purchasedfrom PurchaseDate 1803 S. Jefferson P.O. Box 308Lee's Summit, MO 64063 / USA(816) 524-9666 (816) 524-6983 Model Serial No. lbs kw kg Engine Power Unit (weight) h p Solution Problem Possible Cause TROUBLESHOOTING Before Requesting Service Revie...