BILLY GOAT BC2401IC, BC2402H, BC2402HE - Manuals

Page 2 - TABLE OF CONTENTS; VIBRATION; SOUND; IN THE INTEREST OF SAFETY; The Engine Exhaust from this product contains chemicals known

Part No. 500264 Form No. F082704A WARNING: DO NOT 1. DO NOT run engine in an enclosed area. Exhaust gases contain carbonmonoxide, an odorless and deadly poison. 2. DO NOT place hands or feet near moving or rotating parts. 3. DO NOT store, spill or use gasoline near an open flame, or devices such as ...

Page 3 - PACKING CHECKLIST; GENERAL SAFETY

Part No. 500264 Form No. F082704A Literature Assy Check Literature Assy500263 Per Model PACKING CHECKLIST 11 Check Briggs & Stratton Engine Manual Check Honda (English) These items should be included in your carton. Ifany of these parts are missing, contact your dealer. Check Bar Guard WA500235 ...

Page 4 - ENGINE LABELS; Honda; HONDA; INSTRUCTION LABELS; DANGER; WARNING

Part No. 500264 Form No. F082704A Page 4 of 12 CONTROLS Throttle Control Owner's Manual Check Owner's Manual 500264 Warranty Card Check Warranty Card 400972 Literature Checklist 12 13 LITERATURE ASSY P/N 500263 ENGINE LABELS 15 Briggs engines have a choke type carburetor that isoperated by moving th...

Page 5 - CUTTING OPERATION; PUT OIL IN ENGINE BEFORE STARTING.; OPERATION; STARTING; BLADE CLUTCH; Danger

Part No. 500264 Form No. F082704A ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil andgasoline. ENGINE SPEED: Controlled by throttle lever on the handle. FUEL VALVE: Move fuel valve to "ON" positio...

Page 6 - PARTS DRAWING

Part No. 500264 Form No. F082704A Page 6 of 12 PARTS DRAWING 18 BC2402HE, BC2402H, BC2402IC, BC2402ICE

Page 9 - continued; Never lift the unit with the engine running.; GROUND SPEED; When cutting brush and normal field grasses it is

Part No. 500264 Form No. F082704A Page 9 of 12 OPERATION continued 16 Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an openflame, spark or pilot light, as on a furnace, water heater, clothesdryer or other gas appliance. If engine is t...

Page 10 - Substitute; MAINTENANCE; Blade, and drive belts are normal wear items.; BLADE DRIVE BELT; WHEEL DRIVE CLUTCH ADJUSTMENT

Part No. 500264 Form No. F082704A When replacing one belt the other should be inspected forwear and replaced if worn. It is good practice to change bothbelts when either is worn beyond use. Use only originalequipment belts for replacement. Billy Goat uses only premiumquality, kevlar corded and coate...

Page 11 - Blade Drive Belt; Maintenance Schedule; MAINTENANCE HISTORY; BLADE DRIVE BELT TENSION ADJUSTMENT

Part No. 500264 Form No. F082704A Page 11 of 12 MAINTENANCE continued 17 TransaxleDrive Belt Blade Drive Belt Fig. 3 Belt in top grooveof engine pulley Belt in bottom grooveof engine pulley Engine (See Engine Manual) Check for excessive vibration Inspect for loose parts Maintenance Operation Follow ...

Page 12 - Engine Service and Warranty; Serial Plate; TROUBLESHOOTING; CLUTCH ADJUSTMENT; If the clutch begins to squeal or slip, do not

Part No. 500264 Form No. F082704A Page 12 of 12 Purchasedfrom PurchaseDate Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer. 22.1 21 Serial Plate R ecord your machine model, serial number and date-of-purchase and where purchased R min -1 BILLY GOAT I...