BILLY GOAT BC2401IC - Manuals

Page 2 - TABLE OF CONTENTS; VIBRATION; VIBRATION LEVEL 1.1g; SOUND; IN THE INTEREST OF SAFETY; The Engine Exhaust from this product contains chemicals known; Sound level of 93 dBA at operator position

Part No. 500264 Form No. F051903A WARNING: DO NOT 1. DO NOT run engine in an enclosed area. Exhaust gases contain carbonmonoxide, an odorless and deadly poison. 2. DO NOT place hands or feet near moving or rotating parts. 3. DO NOT store, spill or use gasoline near an open flame, or devices such as ...

Page 3 - Literature; PACKING CHECKLIST; Engine

Part No. 500264 Form No. F051903A Page 3 of 12 For your safety and the safety of others, these directions should be followed: Do not operate this machine without first readingowner's manual and engine manufacturer's manual. Use of Eye and Breathing protection is recom- mended when using this machine...

Page 4 - INSTRUCTION LABELS; CONTROLS; WARNING; ENGINE LABELS; DANGER; Honda; US DESIGN PATENT; HONDA

Part No. 500264 Form No. F051903A Page 4 of 12 INSTRUCTION LABELS CONTROLS Throttle Control Owner's Manual Check Owner's Manual 500264 Warranty Card Check Warranty Card 400972 Literature Checklist These labels should be included on your Brush Cutter. If any of theselabels are damaged, replace them b...

Page 5 - CUTTING OPERATION; PUT OIL IN ENGINE BEFORE STARTING.; OPERATION; STARTING; BLADE CLUTCH; Danger

Part No. 500264 Form No. F051903A ENGINE: See engine manufacturer ’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil andgasoline. ENGINE SPEED: Controlled by throttle lever on the handle. FUEL VALVE: Move fuel valve to "ON" positi...

Page 6 - PARTS DRAWING

Part No. 500264 Form No. F051903A Page 6 of 12 PARTS DRAWING 18 BC2402HE, BC2402H, BC2401IC

Page 9 - continued; Never lift the unit with the engine running.; STORAGE; GROUND SPEED; PROPULSION; SHIFT LEVER; CUTTING HEIGHT ADJUSTMENT; When cutting brush and normal field grasses it is

Part No. 500264 Form No. F051903A Page 9 of 12 OPERATION continued 16 Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an openflame, spark or pilot light, as on a furnace, water heater, clothesdryer or other gas appliance. If engine is t...

Page 10 - Substitute belts do not meet the design and; MAINTENANCE; Blade, and drive belts are normal wear items.; Blade Drive Belt

Part No. 500264 Form No. F051903A When replacing one belt the other should be inspected for wear andreplaced if worn. It is good practice to change both belts when eitheris worn beyond use. Use only original equipment belts for replace-ment. Billy Goat uses only premium quality, kevlar corded and co...

Page 11 - Maintenance Operation; Maintenance Schedule; MAINTENANCE HISTORY; Service Performed; BLADE DRIVE BELT TENSION ADJUSTMENT

Part No. 500264 Form No. F051903A Page 11 of 12 MAINTENANCE continued 17 TransaxleDrive Belt Blade Drive Belt Fig. 3 Belt in top grooveof engine pulley Belt in bottom grooveof engine pulley Engine (See Engine Manual) Check for excessive vibration Inspect for loose parts Maintenance Operation Follow ...

Page 12 - Engine Service and Warranty; Contact your nearest engine manufacturer's authorized; Serial Plate; WARRANTY PROCEDURE; Solution; TROUBLESHOOTING; CLUTCH ADJUSTMENT; Model; If the clutch begins to squeal or slip, do not

Part No. 500264 Form No. F051903A Page 12 of 12 Purchasedfrom PurchaseDate Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer. 22.1 21 Serial Plate R ecord your machine model, serial number and date-of-purchase and where purchased R min -1 BILLY GOAT I...