Page 2 - Table of contents; Signs and symbols; Getting to know your device; HEPA filter E 12; Principle of air cleaning
13 1. Getting to know your device .................. 132. Intended use ............................................ 143. Notes ........................................................ 144. Device description .................................. 155. Initial use ...........................................
Page 3 - Electric shock; Repairs; WARNING; Risk of fire; WARNING
14 Contaminated, unfiltered air can have the following effects: • Infections and respiratory diseases are more likely to occur • Damage to health through harmful gases 2. Intended use This air cleaner is intended exclusively for cleaning the air indoors. WARNING If you suffer from severe respiratory...
Page 4 - Handling; IMPORTANT; Device description
15 Handling IMPORTANT The device must be switched off and disconnected from the mains after every use and before cleaning. • Do not place any objects in device openings or in rotating parts. Ensure that the moving parts can move freely at all times. • Do not place any objects on the device. • Do not...
Page 5 - Display and buttons; AUTO button; Removing the air cleaner
16 Display and buttons 3 4 5 2 1 1 ON/OFF button Switches the device on/off 4 UV-C light button Switches the UV-C light on/off 2 AUTO button Activates the automatic function (fan speed auto- matically adapts to the ambient air quality and the LED is lit continuously). If the light below "Replace...
Page 6 - Switching on the air cleaner; Automatic function; Note
17 6. Operation 6.1 Switching on the air cleaner 1. Always follow the instructions in chapter "5 Initial use".2. Insert the mains plug into the socket. Ensure that the cable does not pose a trip hazard.3. Press the ON/OFF button ( ) to switch on the air cleaner. Note When the air cleaner is ...
Page 8 - Cleaning and storage; The activated carbon filter is; Front; Cleaning the housing
19 7. Cleaning and storage WARNING Before cleaning, always ensure that the mains plug of the air cleaner has been properly disconnected. 7.1 Cleaning the filter Regular cleaning of the filter (once a month) is a prerequisite for hygienic and fault-free operation. • Clean the three-layered filter usi...
Page 9 - Replacement parts and wearing parts; Designation
20 8. What to do if there are problems? Problem Cause Solution The air cleaner will not switch on The housing cover is not correct- ly installed. Ensure that the housing cover is correctly installed. The three-layered filter is not cor- rectly inserted. Ensure that the three-layered fil- ter is corr...
