BenQ PE8720 - Manuals - manualsarea.com

Page 2 - Copyright; Table of Contents

2 Copyright Copyright Copyright 2005 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, op...

Page 3 - Packing Parts List; Names of Parts

Packing Parts List 3 Packing Parts List U-PLATE NUTS x 4 PROJECTOR ADAPTER CEILING ADAPTER PIPE M3 SCREWS x 8 M4 SCREWS x 4 SQUARE TUBE M6 SCREWS x 4 TUBE ADJUSTMENT ASSEMBLY BOLTS x 7 (TUBE BOLTS x 2, L – ADJUST BOLT x 2, TUBE BOLTS x 2) Names of Parts U - PLATE TUBE BOLTS x 2 L-ADJUST BOLTS x 2 TU...

Page 4 - Projector Installation and Throw Distance Chart; Installation for a 16:9 screen; Installation for a 4:3 screen

4 Projector Installation and Throw Distance Chart Projector Installation and Throw Distance Chart Installation for a 16:9 screen 16:9 (widescreen) ratio screen dimension table Screen H eight Projection Distance Diagonal Offset Ceiling Center of the lens Ceiling Installation Screen Heigh t Offset Flo...

Page 5 - Installing a Projector with the Ceiling Bracket; Overview; Installation Procedure; STEP A

Installing a Projector with the Ceiling Bracket 5 Installing a Projector with the Ceiling Bracket Overview Q Diagram of completed installation Q Ceiling Mount Device Installation Procedure Insert the U-PLATE into the CEILING ADAPTER, and tighten two M4 SCREWS (from the bottom) into the screw holes. ...

Page 6 - STEP D1; STEP D2; STEP D

6 Installing a Projector with the Ceiling Bracket Install the TUBE and the U-PLATE with 2 sets of BOLTS & NUTS (TUBE BOLT). Install the PIPE and the TUBE with 2 sets of BOLTS & NUTS (L-ADJUST BOLT). Install the base-assembly. STEP D1 Combine the SQUARE TUBE and the PIPE with 2 BOLTS. STEP D2...

Page 7 - Installation finished.; STEP F

Installing a Projector with the Ceiling Bracket 7 Assemble the PROJECTOR ADAPTER and PROJECTOR with 4 M6 SCREWS. Slide the projector with adapter into the ceiling assembly and fix the projector with 4 M3 SCREWS. Installation finished. M6 SCREW Ceiling mount bracket BASE-ASSEMBLY STEP F STEP E M3 SCR...

Page 8 - Adjusting the Ceiling Bracket; Height Adjustment

8 Adjusting the Ceiling Bracket Adjusting the Ceiling Bracket Height Adjustment 1. Make sure to remove the projector first. 2. Loosen the nuts securing to the two L-ADJUST BOLTS. 3. Remove the L-ADJUST BOLTS from the PIPE. 4. Adjust to the correct position for the height of the screen. The height ca...

Page 9 - Horizontal Angle Adjustment; Vertical Angle Adjustment; Swing Adjustment

Adjusting the Ceiling Bracket 9 Horizontal Angle Adjustment 1. Hold the projector’s right and left sides and push it up slightly. 2. Adjust the horizontal angle so that it is correct for the orientation of the screen. 3. The swivel angle can be set within a range of negative to positive 30 degrees. ...

Page 10 - Specifications and Diagrams; Specifications

10 Specifications and Diagrams Specifications and Diagrams Specifications Adjustment Range Height Horizontal angle Vertical angle Swing angle 309 mm, 639 mm, 669 mm, 699 mm, 729 mm, 759 mm, 789 mm, 819 mm and 849 mm. –30 to +30 degrees -5 to +30 degrees -15 to +15 degrees Weight 4.2 kg Loading 4.5 k...