BenQ 125 - Manuals

2 Thank you for using BenQ Joybee 125 MP3 Player! Package content Please check the content of your Joybee 125 MP3 Player. Should any accessories be missing or damaged, please contact your dealer immedi-ately. BenQ Joybee 125 MP3 Player Charger and plug (Output: 5V---300mA) Belt Clip Earphones USB ca...

Thank you for using BenQ Joybee 125 MP3 Player! 3 System requirements If you want to install QMusic on a PC to convert music on an audio CD into MP3 files for use on Joybee 125 or use Joybee 125 as a flash disk, your PC must comply with the following requirements: † OS: Microsoft Windows 98/2000/Me/...

4 Thank you for using BenQ Joybee 125 MP3 Player! Description and function of different parts Description and function of different parts of BenQ Joybee 125 MP3 Player, please see bottom pictures and tables for details. Buttons and jacks (1) (2) (3) (4) (5) (6) (7) (8) (10) (11) (9) (12)

8 Thank you for using BenQ Joybee 125 MP3 Player! Screen The following table shows the icons displayed on the screen and their meanings. Item Description (1) The icon appears when Joybee 125 is playing an file in MP3/ WMA, Voice Playback, or FM Radio mode. (2) The icon appears when the playing is pa...

Getting started... 11 Getting started... Charging the battery 1. Turn the Recharge On/Off switch to On before recharging the battery. 2. Install the plug to the charger as shown in the bottom picture. 3. Please make sure that plug is properly installed to the charger before connecting it to the sock...

Getting started... 13 Installing drivers and software Put the Software CD that comes with Joybee 125 in the CD-ROM on your PC. The installation menu will display on the PC screen in a few seconds. If it does not appear on the PC screen, open File Manager in Windows and locate the ‘autorun.exe’ file ...

Using BenQ Joybee 125 MP3 Player 15 Using BenQ Joybee 125 MP3 Player Turning the power switch on and off Press to turn on Joybee 125. The welcome note will appear on the screen before Joybee 125 enters into the standby mode. If you want to turn off Joybee 125, press and hold for about 3 seconds, the...

16 Using BenQ Joybee 125 MP3 Player Transferring files to Joybee 125 Transferring files with Windows File Manager 1. Turn on Joybee 125. 2. Connect Joybee 125 to a PC. When Joybee 125 is successfully connected to the PC, a new icon ‘Removable Disk’ will appear in My Computer on Windows. Also, a mess...

Using BenQ Joybee 125 MP3 Player 17 Transferring files with QMusic 1. The QMusic icon will appear on Desktop after it is success- fully installed. Double click the icon to open QMusic. You may also run QMusic from StartgProgramsgQMusic2gQMusic2. Description of QMusic main screen Action buttons Left ...

20 Using BenQ Joybee 125 MP3 Player Adding music on an audio CD to Joybee 125 1. Put an audio CD in the CD-ROM on your PC. In a few sec- onds, the icon will appear on the left panel of QMusic, and the files on the CD will appear on the right panel.

Using BenQ Joybee 125 MP3 Player 25 Adding new files to Joybee 125 from a PC 1. Click on the My Joybee on the left panel.

Using BenQ Joybee 125 MP3 Player 29 Updating files automatically with QMusic 1. Click on M My Joybee on the left panel.

Using BenQ Joybee 125 MP3 Player 33 Function menu All functions on Joybee 125 are accessible from the function menu. Therefore, all you need to do is to remember how to operate the function menu as shown in the bottom instruc-tions in order to use these functions and change their settings. Launching...

34 Using BenQ Joybee 125 MP3 Player Button functions in menu mode After launching to the function menu: † Press or to scroll to the previous or next item of the function menu. † Press to select an item or skip to the next level of the menu. † Press to skip to the previous level of the menu. Playing ...

Using BenQ Joybee 125 MP3 Player 35 Operating Joybee 125 when a file is being played Pause a playing file When an file is being played, press to pause. If you want to play the file again, press again. Fast forward When an file is being played, press to go forward. Next file When an file is being pla...

38 Using BenQ Joybee 125 MP3 Player Listening to FM radio 1. Turn on Joybee 125. 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. When "Mode" appears on the screen, press . 4. When "FM Radio" appears on the screen, press . 5. Press and hold or ...

40 Using BenQ Joybee 125 MP3 Player Then, press for several times to return to FM Radio screen. Changing to another mode 1. When listening to the FM radio, press . 2. Press or to scroll to Mode and press . 3. Select the desired mode and press . Recording a FM program • Do not turn off Joybee 125 or ...

Using BenQ Joybee 125 MP3 Player 41 Operating Joybee 125 when playing an FM file Pause a playing file When a file is being played, press to pause. If you want to play the file again, press again. Fast forward When a file is being played, press to go forward. Next file When a file is being played, pr...

Using BenQ Joybee 125 MP3 Player 43 Recording with Joybee 125 • Do not turn on backlight while recording to avoid noise in recording. • Do not turn off Joybee 125 or connect or disconnect it from a PC while recording. • Recording function will be disabled when the battery is low. 1. Turn on Joybee 1...

44 Using BenQ Joybee 125 MP3 Player Playing a recorded file 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. When “Mode” appears on the screen, press . 4. When “Voice Playback” appears ...

46 Using BenQ Joybee 125 MP3 Player 2. Press or to scroll to Lock and press to confirm. Press and hold for about 2 seconds to unlock buttons. Selecting a repeat mode 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the ...

Using BenQ Joybee 125 MP3 Player 47 Turn backlight ON/OFF After turning on Joybee 125, press and hold for about 2 seconds to turn on backlight. Press and hold for about 2 seconds again to turn off backlight. Do not turn on backlight while recording to avoid noise in recording. System setup Adjusting...

48 Using BenQ Joybee 125 MP3 Player Selecting an EQ mode 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. Press or to scroll to “System Setup” and press . 4. Press or to scroll to “EQ” ...

Using BenQ Joybee 125 MP3 Player 49 Deleting a file or recording You may delete an file saved on Joybee 125 with the delete function. 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. Pr...

52 Using BenQ Joybee 125 MP3 Player Checking battery status 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. Press or to scroll to “System Setup” and press . 4. Press or to scroll to “C...

Using BenQ Joybee 125 MP3 Player 53 Checking memory status 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. Press or to scroll to “System Setup” and press . 4. Press or to scroll to “Ch...

54 Using BenQ Joybee 125 MP3 Player Adjusting screen brightness 1. Turn on Joybee 125 (skip this step when Joybee 125 has been turned on). 2. Launch to the function menu as in "Launching to the func- tion menu" p.33. 3. Press or to scroll to “System Setup” and press . 4. Press or to scroll t...

Using BenQ Joybee 125 MP3 Player 55 Playlist In addition to playing MP3/WMA files stored in the memory in order, Joybee 125 has been equipped with the playlist func-tion which allows you to play files in an order as you desire. Creating a playlist with QMusic 1. Double click the QMusic icon on Deskt...

56 Using BenQ Joybee 125 MP3 Player 5. Press and QMusic will create a playlist under M My Joybee on the right panel and update the playlist on Joybee 125. Running playlist You must create a playlist according to the top instructionsbefore using the playlist function. 1. If your Joybee 125 has been c...

Using BenQ Joybee 125 MP3 Player 57 Joybee 125 as a flash disk Connecting Joybee 125 to a PC 1. Turn on Joybee 125. 2. Connect Joybee 125 to a PC. When Joybee 125 is successfully connected to the PC, a new icon “Removable Disk” will appear in My Computer window. Also, a message read “Con-nection Com...

58 Using BenQ Joybee 125 MP3 Player Disconnecting Joybee 125 from a PC 1. Double click the USB device icon on the taskbar tray. 2. A dialog box as shown below will appear on the screen. Select USB Mass Storage Device in the dialog box and press S Stop. 3. Another dialog box as shown bellow will appe...

60 Using BenQ Joybee 125 MP3 Player Updating firmware and formatting memory Updating firmware If your Joybee 125 does not work properly due to firmware damage, you may update the firmware of Joybee 125 with the tool that comes with the device. Please make sure that you have backed up all files on Jo...

Using BenQ Joybee 125 MP3 Player 63 Formatting memory You can perform quick format of the memory on Joybee 125 with the memory formatting tool that comes with Joybee 125. • Do not disconnect Joybee 125 from the PC when format is inprogress. • All data including files, files and directories on Joybee...

Troubleshooting 65 Troubleshooting Unable to transfer files to Joybee 125: Please check the following: † If the USB cable has been securely connected to a PC and Joybee 125, and Joybee 125 is turned on. † If USB driver has been installed on your PC system.† If battery on Joybee 125 is full. Data sto...

66 Service Service If you cannot solve the problems found on Joybee 125 with the troubleshooting guide, please contact our worldwide service locations to obtain the latest drivers and online services. Area Country Telephone Number E-mail Address Asia China +86-512-68092520 [email protected] Hong K...